VoidSquid Posted July 20, 2020 Share Posted July 20, 2020 (edited) Hey @Jim DiGriz, I tried to calculate an advanced transfer from an equatorial LKO to capture a comet (elliptical sun orbit) Spoiler SMA = 70134072147.612305 ECC = 0.82648286050631148 INC = -26.112869262695313 LPE = 0 LAN = 353.21475219726563 MNA = -0.22117447668630896 EPH = 20171779.585267063 but unfortunately MJ dev #1000 always throws "an error occured while creating the node", the logfile says: [LOG 12:35:42.630] [MechJeb] porkchop scanning found DVminsqr = 28293504.5198571 DVmaxsqr = 2.23409310460492E+15 [EXC 12:35:48.102] NullReferenceException: Object reference not set to an instance of an object MuMech.OperationAdvancedTransfer.MakeNodesImpl (Orbit o, System.Double UT, MuMech.MechJebModuleTargetController target) (at <bd2f44b018644269bf2013ae8c705cdf>:0) MuMech.Operation.MakeNodes (Orbit o, System.Double universalTime, MuMech.MechJebModuleTargetController target) (at <bd2f44b018644269bf2013ae8c705cdf>:0) UnityEngine.DebugLogHandler:LogException(Exception, Object) ModuleManager.UnityLogHandle.InterceptLogHandler:LogException(Exception, Object) UnityEngine.Debug:LogException(Exception) MuMech.Operation:MakeNodes(Orbit, Double, MechJebModuleTargetController) MuMech.MechJebModuleManeuverPlanner:WindowGUI(Int32) MuMech.DisplayModule:ProfiledWindowGUI(Int32) UnityEngine.GUI:CallWindowDelegate(WindowFunction, Int32, Int32, GUISkin, Int32, Single, Single, GUIStyle) Any idea what's going on here, that DVmaxsqr looks pretty big? Edited July 20, 2020 by VoidSquid Quote Link to comment Share on other sites More sharing options...
IntoSpaceAgain Posted July 20, 2020 Share Posted July 20, 2020 11 hours ago, eM-Krow said: I'm trying to get all Mechjeb modules unlocked at the start but editing the CFG files to say start instead of whatever they were previously doesn't seem to actually unlock everything fully. I'm on dev build #1000 for 1.10. They were unlocked on previous versions but I wanted to use the dev build because apparently I wouldn't need to use the AR202 module anymore (at least without using something like Mechjeb and Engineer for All). But yeah it will say I'm missing some or after changing some of the values to "start", it will unlock only some or not at all. I feel like I could be doing something wrong but not sure. Nevermind, found out what was causing it. Apparently the way I edited it did unlock everything but the options that worked around using the maneuver planner were hidden regardless since they needed the maneuver planner to work. (Not sure if that's a dev build thing but maybe I just missed it). Was ripping my hair out over nothing lmao. There's an easier way of unlocking Mechjeb's modules. Simply create an empty folder in GameData called MechJebUnlocked. See: https://ksp.sarbian.com/jenkins/job/MechJeb2-Dev/884/changes Quote Link to comment Share on other sites More sharing options...
NateDaBeast Posted July 22, 2020 Share Posted July 22, 2020 Anyone know why I could be getting this error all of a sudden? Log - https://www.dropbox.com/s/9k5ihn474vthi4z/Player.log?dl=0 Quote Link to comment Share on other sites More sharing options...
GoldForest Posted July 22, 2020 Share Posted July 22, 2020 2 hours ago, NateDaBeast said: Anyone know why I could be getting this error all of a sudden? Log - https://www.dropbox.com/s/9k5ihn474vthi4z/Player.log?dl=0 How did you get all those extra options in your ascent guidance? Quote Link to comment Share on other sites More sharing options...
HansAcker Posted July 22, 2020 Share Posted July 22, 2020 4 hours ago, GoldForest said: How did you get all those extra options in your ascent guidance? Change the profile selection from "Classic Ascent Profile" to "Primer Vector Guidance (RSS/RO)" Quote Link to comment Share on other sites More sharing options...
GoldForest Posted July 23, 2020 Share Posted July 23, 2020 (edited) 13 hours ago, HansAcker said: Change the profile selection from "Classic Ascent Profile" to "Primer Vector Guidance (RSS/RO)" Ah. Does it work outside RSS/RO? I know it has RSS/RO in the name, but I was just wondering if it can be used for stock as well. Edited July 23, 2020 by GoldForest Quote Link to comment Share on other sites More sharing options...
Acid_Burn9 Posted July 23, 2020 Share Posted July 23, 2020 (edited) Quote 2.10.0 Spanish translation Russian translation @sarbian How do i disable localization? Edited July 23, 2020 by Acid_Burn9 Quote Link to comment Share on other sites More sharing options...
sarbian Posted July 23, 2020 Author Share Posted July 23, 2020 38 minutes ago, Acid_Burn9 said: @sarbian How do i disable localization? Set the game language to English ? Quote Link to comment Share on other sites More sharing options...
Acid_Burn9 Posted July 23, 2020 Share Posted July 23, 2020 19 minutes ago, sarbian said: Set the game language to English ? Is that the only way? Quote Link to comment Share on other sites More sharing options...
sarbian Posted July 23, 2020 Author Share Posted July 23, 2020 What do you want ? The game in a language and MJ in English? I don't see the point but you can do it by deleting the cfg of other languages in Gamedata\MechJeb2\Localization. Just keep the en-us.cfg Quote Link to comment Share on other sites More sharing options...
Acid_Burn9 Posted July 23, 2020 Share Posted July 23, 2020 (edited) 7 minutes ago, sarbian said: What do you want ? The game in a language and MJ in English? I don't see the point but you can do it by deleting the cfg of other languages in Gamedata\MechJeb2\Localization. Just keep the en-us.cfg Yes that's what i wanted. Localized MJ version is very confusing. Thanks for the help. Edited July 23, 2020 by Acid_Burn9 Quote Link to comment Share on other sites More sharing options...
seanth Posted July 23, 2020 Share Posted July 23, 2020 I recently made a dual prop powered hydrofoil, and am having a hard time getting some aspects of mechjeb working with it. In the past when making boats, I could use mechjeb's utilities to limit Q, which was an effective way to control the throttle (for complicated reasons setting a max speed would not work with hydrofoils). The breaking ground electric motors need an action group to let them be controlled via the throttle, and even though mechjeb correctly changes throttle settings the electric motors don't change their speed. I'm sure this must also be a problem people run into with prop planes. Any suggestions? Quote Link to comment Share on other sites More sharing options...
Michel Bartolone Posted July 23, 2020 Share Posted July 23, 2020 Advanced transfer to another planet seems to have picked up a flaw in the last week. I was trying to use advanced transfer to another planet, and that seems to work fine, i.e the timing seems OK and the delta V seems about right, BUT when I tell it to create and execute the transfer node, it tells me that I am already orbiting Duna! Unless I fell into a wormhole during ascent from Kerbin, I am most assuredly NOT orbiting Duna. Note: I did a basic search here and don't see this issue, but it could be what I used for search terms. Which logs (if any) would help isolate this issue? I'm currently running KSP 1.9.1 waiting for some specific mods to drop for 1.10 before I start playing that version. Quote Link to comment Share on other sites More sharing options...
VoidSquid Posted July 23, 2020 Share Posted July 23, 2020 (edited) 16 minutes ago, Michel Bartolone said: it tells me that I am already orbiting Duna! Known display bug since a couple of versions: https://forum.kerbalspaceprogram.com/index.php?/topic/154834-110x-anatid-robotics-mumech-mechjeb-autopilot-2100-5th-july-2019/page/118/&tab=comments#comment-3748386 Edited July 23, 2020 by VoidSquid Quote Link to comment Share on other sites More sharing options...
Michel Bartolone Posted July 24, 2020 Share Posted July 24, 2020 On 7/23/2020 at 11:45 AM, VoidSquid said: Known display bug since a couple of versions: https://forum.kerbalspaceprogram.com/index.php?/topic/154834-110x-anatid-robotics-mumech-mechjeb-autopilot-2100-5th-july-2019/page/118/&tab=comments#comment-3748386 That is a year and quite a few releases ago. I've never seen it before, so what made it popup now? I also don't see an explanation of how to fix or get around it (but maybe I missed something?) Quote Link to comment Share on other sites More sharing options...
StoneWolfPC Posted July 25, 2020 Share Posted July 25, 2020 On 7/23/2020 at 1:29 PM, Michel Bartolone said: Advanced transfer to another planet seems to have picked up a flaw in the last week. I was trying to use advanced transfer to another planet, and that seems to work fine, i.e the timing seems OK and the delta V seems about right, BUT when I tell it to create and execute the transfer node, it tells me that I am already orbiting Duna! Unless I fell into a wormhole during ascent from Kerbin, I am most assuredly NOT orbiting Duna. Note: I did a basic search here and don't see this issue, but it could be what I used for search terms. Which logs (if any) would help isolate this issue? I'm currently running KSP 1.9.1 waiting for some specific mods to drop for 1.10 before I start playing that version. The logs are located in your operating system drive, so mine is C:\User\(YourUserName)\Appdata\LocalLow\Squad\Kerbal Space Program. The files may be hidden so you need to make sure they are visible. The file you need is Player.log The best results for mod authors to sort this issue out, however, will be to delete that log, reload, reproduce the problem as swiftly as possible, exit the game. That will produce the logs needed without flooding it as much. I recently had an issue that required me to go through the same stuff, only I had to sort out to a single mod conflict. lmao. Quote Link to comment Share on other sites More sharing options...
Jim DiGriz Posted July 25, 2020 Share Posted July 25, 2020 On 7/22/2020 at 12:28 AM, NateDaBeast said: Anyone know why I could be getting this error all of a sudden? Log - https://www.dropbox.com/s/9k5ihn474vthi4z/Player.log?dl=0 You have PVG selected but you have "Fine tuning apoapsis" as a status, which is a fixed months-old translation bug which indicates your MJ is out of date. A lot of those argument exception errors should have been fixed by patches to improve handling of crazy transient staging issues which went in after that bug was fixed. Quote Link to comment Share on other sites More sharing options...
VoidSquid Posted July 25, 2020 Share Posted July 25, 2020 (edited) 21 hours ago, Michel Bartolone said: That is a year and quite a few releases ago. I've never seen it before, so what made it popup now? I also don't see an explanation of how to fix or get around it (but maybe I missed something?) Actually that was in February this year, when Jim introduced the Brent solver together with calculating a 2nd node for circularization orbit around the target CB. And as this 2nd node naturally is created in the target SOI, that's what is causing this nonsense message. No need to fix it, just ignore it Edited July 25, 2020 by VoidSquid Quote Link to comment Share on other sites More sharing options...
workingDead Posted July 25, 2020 Share Posted July 25, 2020 "Ascent guidance - drop solids earlier" is selected, the solids will be dropped when launching the rocket. Quote Link to comment Share on other sites More sharing options...
NateDaBeast Posted July 25, 2020 Share Posted July 25, 2020 4 hours ago, Jim DiGriz said: You have PVG selected but you have "Fine tuning apoapsis" as a status, which is a fixed months-old translation bug which indicates your MJ is out of date. A lot of those argument exception errors should have been fixed by patches to improve handling of crazy transient staging issues which went in after that bug was fixed. I'm not sure how its out of date considering I'm using CKAN. I'm on 1.8.1 JNSQ if that helps or changes anything. I haven't had the issue in a bit so maybe it was a one time thing. Quote Link to comment Share on other sites More sharing options...
darthgently Posted July 27, 2020 Share Posted July 27, 2020 (edited) On 7/25/2020 at 5:01 PM, workingDead said: "Ascent guidance - drop solids earlier" is selected, the solids will be dropped when launching the rocket. I've had tweakscale glitches where boosters would be short on fuel when scaled up, but never empty and never all of them. Any earlier and it would be in the editor. That's funny Edited July 27, 2020 by darthgently Quote Link to comment Share on other sites More sharing options...
Michel Bartolone Posted July 27, 2020 Share Posted July 27, 2020 On 7/25/2020 at 10:49 AM, VoidSquid said: Actually that was in February this year, when Jim introduced the Brent solver together with calculating a 2nd node for circularization orbit around the target CB. And as this 2nd node naturally is created in the target SOI, that's what is causing this nonsense message. No need to fix it, just ignore it I stand corrected, I must have been looking at the wrong tab, which had a date of Feb 2019... Quote Link to comment Share on other sites More sharing options...
Lisias Posted July 27, 2020 Share Posted July 27, 2020 12 hours ago, darthgently said: I've had tweakscale glitches where boosters would be short on fuel when scaled up, but never empty and never all of them. Any earlier and it would be in the editor. That's funny If you are on KSP 1.9, it's a known (and fixed) problem: you need to install KSP-Recall. This will fix this toe-stomping not only on TweakScale, but on Fuel-Switches too. If you are not running KSP 1.9, then it's something else. Place a note on TweakScale's thread with your KSP.log and Player.log and I will dive on it. Cheers! Quote Link to comment Share on other sites More sharing options...
darthgently Posted July 27, 2020 Share Posted July 27, 2020 (edited) 2 hours ago, Lisias said: If you are on KSP 1.9, it's a known (and fixed) problem: you need to install KSP-Recall. This will fix this toe-stomping not only on TweakScale, but on Fuel-Switches too. If you are not running KSP 1.9, then it's something else. Place a note on TweakScale's thread with your KSP.log and Player.log and I will dive on it. Cheers! Ok, I am running 1.9, that explains why after installing KSP-Recall I haven't had it happen again. I'm just trying to have fun playing when I'm not working and have trouble finding time to methodically sort out which mod, or combo of mods, may be an issue; so many times I'll change so many things at once trying to get a stable system quick that I'm never sure what fixed a problem. I did finally take the time to look at logs and leverage the Exception Detector mod to realize that RemoteTech was by far the biggest problem. It is gone now and things are so much better. Thanks for the clarification Edited July 27, 2020 by darthgently Quote Link to comment Share on other sites More sharing options...
Miguelsgamingch Posted July 29, 2020 Share Posted July 29, 2020 Totally Not requesting mechjeb to update to 1.10.1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.