Beccab Posted June 29, 2022 Share Posted June 29, 2022 Quote Link to comment Share on other sites More sharing options...
Deddly Posted June 29, 2022 Share Posted June 29, 2022 Has anyone done the calculation to see how much heavier Starship is because Elon wanted it to be more pointy? Quote Link to comment Share on other sites More sharing options...
magnemoe Posted June 29, 2022 Share Posted June 29, 2022 9 hours ago, mikegarrison said: This is part of the reason why welds are not traditionally used on airplanes. These days welds are done by machine and are extremely consistent. If you use friction stir welding, it's not even an additive process. Thought it was more with problem welding thin aluminum plates. Ships got lighter then they shifted from rivets to welding during WW 2, think it was as much as 5% Quote Link to comment Share on other sites More sharing options...
Alyx0304 Posted June 29, 2022 Share Posted June 29, 2022 How do y'all think Starship's landing legs are gonna look like? I heard someone say they were gonna use ones similar to the ones on the SNs but stronger Also, do you think it's still gonna land on Mars? Quote Link to comment Share on other sites More sharing options...
Beccab Posted June 29, 2022 Share Posted June 29, 2022 52 minutes ago, Alyx0304 said: How do y'all think Starship's landing legs are gonna look like? I heard someone say they were gonna use ones similar to the ones on the SNs but stronger Also, do you think it's still gonna land on Mars? The landing legs will be a lot different between variants for sure; for earth landings, something the old ones seem pretty decent, considering it's a concrete landing pad with a flat surface. For moon and mars landing you need a wider base though, as well as some degree of levelling in the landing gear. As for mars, it's still a bit too far to go beyond personal opinions for now. Imho, there will likely be at least some cargo landings; it's too early to speculate much about crewed mars trips though. I'm tending toward yes on both parts, but who knows Quote Link to comment Share on other sites More sharing options...
tater Posted June 29, 2022 Share Posted June 29, 2022 Quote Link to comment Share on other sites More sharing options...
CatastrophicFailure Posted June 29, 2022 Share Posted June 29, 2022 And here we are on the KSP forum SpaceX thread, now devolved into literally arguing about watching paint dry. Quote Link to comment Share on other sites More sharing options...
JoeSchmuckatelli Posted June 29, 2022 Share Posted June 29, 2022 (edited) 1 hour ago, CatastrophicFailure said: And here we are on the KSP forum SpaceX thread, now devolved into literally arguing about watching paint dry. IKR? What did I start? ... Of course, when I quip about paint drying on the KSP2 sub, bad things happen Edited June 29, 2022 by JoeSchmuckatelli Quote Link to comment Share on other sites More sharing options...
tater Posted June 29, 2022 Share Posted June 29, 2022 Live Quote Link to comment Share on other sites More sharing options...
tater Posted June 29, 2022 Share Posted June 29, 2022 Another routine flight to space so far. MECO, sep, SES-1, fairing. Entry burn Greased it. Dead center. Quote Link to comment Share on other sites More sharing options...
Beccab Posted June 29, 2022 Share Posted June 29, 2022 Landed! Quote Link to comment Share on other sites More sharing options...
tater Posted June 29, 2022 Share Posted June 29, 2022 Quote Link to comment Share on other sites More sharing options...
sh1pman Posted June 29, 2022 Share Posted June 29, 2022 Was thinking about Moonship lander. Is there any info about how SpaceX is going to deal with heating issues? The ship is going to be sitting in constant sunlight for weeks. In a vacuum. Without some kind of active cooling the cabin will turn into a hot sauna very quickly. Quote Link to comment Share on other sites More sharing options...
StrandedonEarth Posted June 29, 2022 Share Posted June 29, 2022 8 minutes ago, sh1pman said: Was thinking about Moonship lander. Is there any info about how SpaceX is going to deal with heating issues? The ship is going to be sitting in constant sunlight for weeks. In a vacuum. Without some kind of active cooling the cabin will turn into a hot sauna very quickly. There’s really no info at all about the habitable space. Presumably a cooling system will be part of that. I suppose they could lay out some ground loops to radiate away heat in whatever direction is away from the Sun, or even have them in on or under the skin of the vehicle And then there’s the matter of keeping warm during the lunar night, but at least there will probably be some waste heat to help with that Quote Link to comment Share on other sites More sharing options...
Ultimate Steve Posted June 29, 2022 Share Posted June 29, 2022 Just now, StrandedonEarth said: There’s really no info at all about the habitable space. Presumably a cooling system will be part of that. I suppose they could lay out some ground loops to radiate away heat in whatever direction is away from the Sun, or even have them in on or under the skin of the vehicle And then there’s the matter of keeping warm during the lunar night, but at least there will probably be some waste heat to help with that Correct me if I'm wrong, but IIRC Artemis plans to land at places where the nights are either short or non existent. Depending on how short, they might be able to get away with burning some of their propellant for heat (and power) although that may not be trivial to plumb. Quote Link to comment Share on other sites More sharing options...
sh1pman Posted June 29, 2022 Share Posted June 29, 2022 Just now, StrandedonEarth said: I suppose they could lay out some ground loops to radiate away heat in whatever direction is away from the Sun, or even have them in on or under the skin of the vehicle Also, the ground itself gets boiling hot during the lunar day, so the radiators will need to be properly insulated. Does it make sense to find a permanently shaded ditch nearby and bury the coolant pipes underground there? Quote Link to comment Share on other sites More sharing options...
StrandedonEarth Posted June 29, 2022 Share Posted June 29, 2022 14 minutes ago, sh1pman said: Also, the ground itself gets boiling hot during the lunar day, so the radiators will need to be properly insulated. Does it make sense to find a permanently shaded ditch nearby and bury the coolant pipes underground there? I was thinking have the coolant loops under a reflective Mylar canopy of some sort, keeping the ground underneath cool, and radiate out the sides. But they probably have completely different ideas. I’m just spitballing here. Quote Link to comment Share on other sites More sharing options...
JoeSchmuckatelli Posted June 29, 2022 Share Posted June 29, 2022 38 minutes ago, sh1pman said: Also, the ground itself gets boiling hot during the lunar day, so the radiators will need to be properly insulated. Does it make sense to find a permanently shaded ditch nearby and bury the coolant pipes underground there? 18 minutes ago, StrandedonEarth said: I was thinking have the coolant loops under a reflective Mylar canopy of some sort, keeping the ground underneath cool, and radiate out the sides. But they probably have completely different ideas. I’m just spitballing here. How much lateral conduction would actually occur through regolith without atmosphere / water? Simple shading should be generally sufficient I'd think. Quote Link to comment Share on other sites More sharing options...
Ultimate Steve Posted June 29, 2022 Share Posted June 29, 2022 (edited) They could have the loops raised slightly up off the ground with specially designed posts to minimize heat transfer. Edited June 29, 2022 by Ultimate Steve Quote Link to comment Share on other sites More sharing options...
tater Posted June 30, 2022 Share Posted June 30, 2022 https://riograndeguardian.com/trevino-i-expect-starship-to-launch-from-boca-chica-within-next-90-days/ Quote “I could accurately say that if it was up to SpaceX it would have been today or yesterday. I can say that with a 100 percent degree of certainty,” Treviño responded. “But, I think on the real aggressive side, we are probably talking 30 days. On the more moderate side, probably 60 and more realistically 90. But, it could be anywhere in that ballpark.” Quote Link to comment Share on other sites More sharing options...
CatastrophicFailure Posted June 30, 2022 Share Posted June 30, 2022 Race is still on. Quote Link to comment Share on other sites More sharing options...
sh1pman Posted June 30, 2022 Share Posted June 30, 2022 12 hours ago, JoeSchmuckatelli said: How much lateral conduction would actually occur through regolith without atmosphere / water? Simple shading should be generally sufficient I'd think. Shading of what, the ship? Like with a giant sun umbrella? Quote Link to comment Share on other sites More sharing options...
Pthigrivi Posted June 30, 2022 Share Posted June 30, 2022 (edited) Long term a good solution might be digging trenches for a geothermal heat pump loop, essentially turning the regolith into a thermal battery to store heat during the day for use at night. On earth you have to dig down 1.2m or so, but soil on earth generally has quite a bit of conductive moisture so the heat pulse might not go so deep on on the moon. Edit: Oh duh just dig a series of bore holes: https://denning.atmos.colostate.edu/readings/lunar.regolith.heat.transfer.pdf Edited June 30, 2022 by Pthigrivi Quote Link to comment Share on other sites More sharing options...
StrandedonEarth Posted June 30, 2022 Share Posted June 30, 2022 3 hours ago, Pthigrivi said: Long term a good solution might be digging trenches for a geothermal heat pump loop, essentially turning the regolith into a thermal battery to store heat during the day for use at night. On earth you have to dig down 1.2m or so, but soil on earth generally has quite a bit of conductive moisture so the heat pulse might not go so deep on on the moon. Edit: Oh duh just dig a series of bore holes: https://denning.atmos.colostate.edu/readings/lunar.regolith.heat.transfer.pdf I was thinking boreholes too. Thx for finding a relevant document Quote Link to comment Share on other sites More sharing options...
Beccab Posted July 1, 2022 Share Posted July 1, 2022 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.