COL.R.Neville Posted June 14, 2019 Share Posted June 14, 2019 might want to check the model for coneb its currently set to use the conea model. also the vernor engine classic needs to be set to use the newmodel.mu in the folder. and i think you are missing the small gear bay classic from the wheel folder. thats all ive found so far. if i find anymore ill let you know. Quote Link to comment Share on other sites More sharing options...
xD-FireStriker Posted June 30, 2020 Share Posted June 30, 2020 Spacedock is down at the time of me typeing this so there is no way for me to test before asking. Does this still work in 1.9? Quote Link to comment Share on other sites More sharing options...
Miguelsgamingch Posted September 20, 2020 Share Posted September 20, 2020 This Mod Works with KSP 1.10.1 - 1.8.1 But I Did found something with this Mod. It Integrates RasterPropMonitor, And In Mk1-2, Mk1 IVA It shows up the Old IVA Screens During That Time, Gives me a nostalgic old RasterPropMonitor Screens Current Mk1 Pod: (Dont worry about the screens, My KSP Graphics Are Low And This is the cause of the screens) Old Parts Redux's Old Mk1 Pod: Its Pretty Weird. Im Using 1.10.1 Currently. Quote Link to comment Share on other sites More sharing options...
TriggeredSnake Posted April 10, 2021 Author Share Posted April 10, 2021 On 6/30/2020 at 8:06 AM, xD-FireStriker said: Spacedock is down at the time of me typeing this so there is no way for me to test before asking. Does this still work in 1.9? Yes it works fine in all versions most likely, it just adds parts so it shouldn’t have issues with new updates. I’m planning a new update soon as I’ve finally resolved the technical issues preventing me from continuing over the last couple of years. On 9/20/2020 at 3:23 AM, Miguelsgamingch said: This Mod Works with KSP 1.10.1 - 1.8.1 But I Did found something with this Mod. It Integrates RasterPropMonitor, And In Mk1-2, Mk1 IVA It shows up the Old IVA Screens During That Time, Gives me a nostalgic old RasterPropMonitor Screens Current Mk1 Pod: (Dont worry about the screens, My KSP Graphics Are Low And This is the cause of the screens) Old Parts Redux's Old Mk1 Pod: Its Pretty Weird. Im Using 1.10.1 Currently. That is unusual, I didn’t realise it included RasterPropMonitor at all. It is weird but it makes sense that it would use the old IVA screens, since the new pods have different IVAs to the older pods. On 6/14/2019 at 5:59 PM, COL.R.Neville said: might want to check the model for coneb its currently set to use the conea model. also the vernor engine classic needs to be set to use the newmodel.mu in the folder. and i think you are missing the small gear bay classic from the wheel folder. thats all ive found so far. if i find anymore ill let you know. Thanks for the cone tip, I will check that. I’ll check the Vernor too. And yes I think I am missing the wheels, but again I will see if I can fix that in a future update. I’ve had serious technical issues for the last 2 years which I finally resolved the other day and I’ve been totally addicted to KSP again as now I can play it without crashes every 2 minutes, and I will be updating OldPartsRedux again soon. Quote Link to comment Share on other sites More sharing options...
linuxgurugamer Posted April 10, 2021 Share Posted April 10, 2021 12 hours ago, TriggeredSnake said: I will be updating OldPartsRedux again soon. Looking forward to it. Quote Link to comment Share on other sites More sharing options...
TriggeredSnake Posted April 10, 2021 Author Share Posted April 10, 2021 2 hours ago, linuxgurugamer said: Looking forward to it. I published an update today clearing up some confusion and explaining my absence, fixing a few bugs and adding some parts. I also implemented a fix for AVC and CKAN with the help of another user, and I have some great news soon for future updates. Quote Link to comment Share on other sites More sharing options...
NotMyProblem Posted July 2, 2021 Share Posted July 2, 2021 Can't wait for the legacy docking port! Quote Link to comment Share on other sites More sharing options...
TriggeredSnake Posted January 21, 2022 Author Share Posted January 21, 2022 On 7/2/2021 at 3:40 PM, NotMyProblem said: Can't wait for the legacy docking port! I'm making an update for that today, thanks for reminding me they changed. Quote Link to comment Share on other sites More sharing options...
TriggeredSnake Posted January 21, 2022 Author Share Posted January 21, 2022 Version 0.11.1 is here with a few new parts, and a bunch of bugfixes. There are a few bugs still that I'm aware of, but I felt a new version was needed and I'm on the way to fixing some of the issues. Features: Added classic versions of the LVT-45 and LVT-30, files taken from 1.11.2. Added classic versions of all the docking ports changed in 1.12. Classic RT-5 Flea and RT-10 BACC are now usable. Added tech tree implementation to a few parts that were lacking it. Some parts have been moved to different categories again, I originally was placing parts in their original category, but now I'm placing them where their modern equivalents are placed. Added the files for some 0.16 and 0.17 parts, but they aren't appearing in game due to issues with the part files. The mod is now listed as compatible with 1.12, but as usual this mod should be compatible with all versions since like 1.2, maybe earlier. Bugfixes: A few parts weren't showing up in game, they were trying to access model files from the wrong place, most of these are fixed now. Aerodynamic nose cone B was using the model for cone A, but this issue was hidden by the fact that the cones were both not visible in game. Both problems are fixed now. RT-10 BACC SRB is fixed now, I tried to add a classic version before but unintentionally discovered a bit of unused content, my BACC Classic was using a different texture somewhere between the new and old designs. I added a proper BACC Classic using files from 1.4 which avoided the issue, and I kept the unused one as the BACC (Unknown). Some files were in the wrong folders, that should be sorted now. Known Bugs: SAS Module (0.20) is the wrong size and has broken attach nodes, I'm not sure the exact issue but I'll get it fixed next update. It's probably a similar issue to the bug the plane cockpits had many updates ago where they attach nodes were backwards. The classic Vernor engine has a weird model that I don't think is correct, but it's definitely using the model in the folder so I'm not sure what the issue is. Some parts might still lack tech tree integration, at some point I will go through every file to make sure this is fixed as I think lacking this prevents them from appearing outside of Sandbox. Most part files just use the model file in the folder, but some of them are programmed to target model files in specific folders. I rewrote most of these when I added them to OldPartsRedux but since I changed my file layout, and Squad have moved some models in the vanilla game, a few parts can't find the right model and won't appear. I need to search through every folder to make sure they are all correct, and that should happen in the next update. Future Plans: I've managed to find every old version of KSP now, so I can start to add parts from 0.14, 15, 16, and 17, unfortunately my attempts so far don't seem to load. I expect this is due to the part file format, and I can probably resolve it by rewriting the file to use something closer to the modern format, I've had to do that before. As OldPartsRedux is getting quite large, I might try to reduce filesizes somehow. The mod also has a huge amount of parts that can take up a lot of the parts list, so I might try to use the "new" variant system for some of the parts that didn't have stat or text changes. I want to add the classic plane parts from pre-1.0.5, and from pre-0.90, and pre-0.25, and the parts from around 0.15. This will take a while as there are a huge amount of parts and I might need to find a copy of 0.25 again after mine got lost in a hard drive issue. Quote Link to comment Share on other sites More sharing options...
AtomicTech Posted January 21, 2022 Share Posted January 21, 2022 Glad to see it back! I really like this mod and the archive it provides! Quote Link to comment Share on other sites More sharing options...
TriggeredSnake Posted January 22, 2022 Author Share Posted January 22, 2022 19 hours ago, AtomicTech said: Glad to see it back! I really like this mod and the archive it provides! Thanks! It's a fun project for me but I often forget to update it when I'm playing other games. There's probably gonna be a smaller update today just to fix a few broken attach nodes and a couple of other issues. I found a way of searching the log files to find exactly what parts where bugged, and a few of them were. One of my next goals is to get the landing gear working, I'm not exactly sure how yet. I got the pre-0.18 landing legs loading in game but so far they don't work, they are just locked closed. I expect I will need to rewrite their files to fit the modern format better. Quote Link to comment Share on other sites More sharing options...
Sirius628 Posted May 28, 2022 Share Posted May 28, 2022 (edited) Is there a way to make the old textures show up as variants rather than separate parts?? @TriggeredSnake Edited May 28, 2022 by Sirius628 Quote Link to comment Share on other sites More sharing options...
Kerbalyer Posted May 31, 2022 Share Posted May 31, 2022 (edited) He last visited January 22, 2022. I don't think he's coming to reply. Edited May 31, 2022 by Kerbalyer https://forum.kerbalspaceprogram.com/index.php?/topic/208289-rosa-a-kerbalized-version-of-roblox-space-program-rasa/#comment-4136112 ROSA. Quote Link to comment Share on other sites More sharing options...
Aelfhe1m Posted May 31, 2022 Share Posted May 31, 2022 7 minutes ago, Kerbalyer said: He last visited January 22, 2022. I don't think he's coming to reply. That's only 4 months. I've was away for longer. Sometimes people just want a change and then come back refreshed and reinvigorated. Quote Link to comment Share on other sites More sharing options...
gamerTM1234 Posted September 29, 2022 Share Posted September 29, 2022 most parts dont fit on without rotating them a bunch i think something might be broken Quote Link to comment Share on other sites More sharing options...
Guest Posted September 29, 2022 Share Posted September 29, 2022 37 minutes ago, gamerTM1234 said: most parts dont fit on without rotating them a bunch i think something might be broken It's normal that some parts don't fit modern parts, others just have their nodes pointed in the opposite direction (Don't know if the original parts where like this or is something with the mod), you can use node helper if you want to correct them yourself Quote Link to comment Share on other sites More sharing options...
Kerbalyer Posted May 18, 2023 Share Posted May 18, 2023 January 22, 2022. Last time he visited. Its been a year since then. Hopefully he comes back soon. Quote Link to comment Share on other sites More sharing options...
Jebby Boi Posted June 6, 2023 Share Posted June 6, 2023 (edited) Hi, I love this mod because when I first started watching my dad play the game most of these parts were still in the game. It was like 2013 or smth. Very nostalgic. The work is great and I have not encountered a single bug. And on a side note, do you think it'd be possible to add compatibility with the mod "Free IVA"? it basically allows you to traverse around interiors. I recommend checking it out. If it's not possible (or if you just plain aren't interested) I won't mind or bug you about it since, well, no means no and all that. Again, great mod, one of my favorites. Well done! Edited June 6, 2023 by Jebby Boi Quote Link to comment Share on other sites More sharing options...
Rocket-Propelled Cat Posted March 1 Share Posted March 1 I'm probably going crazy but wasn't ever in KSP a set of straight wings that where removed some years ago? Searched them everywhere but nothing, and I remember those wings vividly, maybe they where from some mod but I'm pretty sure they were stock Quote Link to comment Share on other sites More sharing options...
Jacke Posted March 3 Share Posted March 3 On 3/1/2025 at 10:18 PM, Rocket-Propelled Cat said: I'm probably going crazy but wasn't ever in KSP a set of straight wings that where removed some years ago? Searched them everywhere but nothing, and I remember those wings vividly, maybe they where from some mod but I'm pretty sure they were stock Looking through the appropriate KSP wiki section: https://wiki.kerbalspaceprogram.com/wiki/Parts#Aerodynamic The closest parts I can see in the stock game are "Wing Connector Type B" and "Wing Connector Type E". Quote Link to comment Share on other sites More sharing options...
CTuB4uk Posted March 3 Share Posted March 3 None of the landing gear/legs can extend for me, is this a known bug or is there a dependency for that? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.