[1.12.x] Where Can I Go? The Opposite of a problem 2.2 (02/06/2024)

Nansuchao · September 26, 2019

What a beautiful idea! Congratulations!

severedsolo · September 29, 2019

On 9/3/2019 at 6:53 PM, Gordon Dry said:

One thing, this typical stockish Unity-ish green and red on dark grey stuff - the red on dark grey I just even do not try to decipher. It lacks a proper contrast.
Some coloring like the Kerbalism UI does would be very helpful.

On 9/25/2019 at 8:22 PM, glibbo said:

I also have to agree with this, if you could make it more "eye friendly" would be good, otherwise a great mod, thank you.

Where Can I Go 1.2 Released

Added ability to pick the colour of the readouts.
Fixed Eve landing figures in JNSQ

You can now pick the colour of the readouts with a MM Patch

@WHERE_CAN_I_GO
{
	@colorIfYes = green
    @colorIfMarginal = yellow
    @colorIfNo = red
}
//supported colours are any that Unity's Color class will accept (case insensitive). Namely:
                black
                blue
                cyan
                gray/grey (will accept either spelling)
                green
                magenta
                red
                white
                yellow```

Edited September 29, 2019 by severedsolo

glibbo · September 29, 2019

Wonderful, thank you very much....

severedsolo · October 30, 2019

Where Can I Go 2.0 Released

Recompile against KSP 1.8 / .Net 4.x

leatherneck6017 · October 30, 2019

Insta-install

therealcrow999 · October 30, 2019

Dang, this looks pretty cool!

severedsolo · January 30, 2020

Where Can I Go 2.1 Released

Add "Payload Only" option in the Editor. This will remove the DV required to get to orbit from the calculations (useful if you want to see if the payload can do it's mission)
Upped DV to get to orbit in JNSQ

Grenartia · February 1, 2020

On 1/30/2020 at 4:03 PM, severedsolo said:

Where Can I Go 2.1 Released

Add "Payload Only" option in the Editor. This will remove the DV required to get to orbit from the calculations (useful if you want to see if the payload can do it's mission)

Upped DV to get to orbit in JNSQ

Getting a lot of good use out of payload only, thanks!

dtoxic · April 28, 2020

ay ay ay awesome mod!

Jognt · April 28, 2020

Heya. So, about those icons. I’ve been thinking.

Why not use the same symbols as the dV map where applicable? Because the dV map covers most stages of flight and will be known by most.

Alas, no example to show. I do far more thinking than actually doing.

Edit: With regards to the colors, I know they’re customizable now, but consider replacing red with greyed-out. After all, it’s not dangerous, it’s just not possible. (Though I guess that could be dangerous..)

Edited April 28, 2020 by Jognt

severedsolo · April 29, 2020

8 hours ago, Jognt said:

Edit: With regards to the colors, I know they’re customizable now, but consider replacing red with greyed-out. After all, it’s not dangerous, it’s just not possible. (Though I guess that could be dangerous..)

Problem is, greyed out is difficult to read, the KSPSkin is already pretty grey (I know come people think red is hard to read too, but this would be worse)

In regards to the icons - I haven't forgotten, I just don't have time at the moment, and it's pretty far down the list.

Having said that, my new PC for work is coming at some point this week, so I can reclaim my gaming PC, so normal service should be resumed shortly.

Gordon Dry · September 19, 2020

https://github.com/severedsolo/WhereCanIGo/pull/7

etmoonshade · September 19, 2020

On 8/28/2019 at 11:48 AM, severedsolo said:

You could try this:

I need to do an update anyway though, as I noticed a couple of issues. I might have it handle rescales automatically

If this holds true, it should be fairly easy to make a "universal" MM patch for simple rescales (e.g. Sigma Dimensions + RESCALE! mods)

I'ma take a crack at this - this looks like a cool mod, but it's currently useless to me since I run 10.625x myself.

etmoonshade · September 20, 2020

@severedsolo = And hey, here we go:

@WHERE_CAN_I_GO:NEEDS[SigDim2&RESCALE]:LAST[WhereCanIGo]		// Needs to be LAST, in case of other planet packs that don't have an inherent rescale, e.g. OPM
{
  @notes = Automatically Generated Rescale
  @warning = Note - these values may be grossly inaccurate.

  dvScaleMult = #$@SigmaDimensions/Resize$

  @dvScaleMult != 0.5


  @BODY,* // This edits all "BODY" entries.
  {
        @flybyDV *= #$../dvScaleMult$				//-1 indicates that the task is impossible and will display "N/A" in the UI.
        @orbitDV *= #$../dvScaleMult$				//Figures should always include DV to get to orbit of the homeworld. (mod will handle removing those itself when needed)
        @synchronousDV *= #$../dvScaleMult$			//this will replace landDV in the UI if used. Probably only want to use this for the homeworld
        @landDV *= #$../dvScaleMult$
        @returnFromFlybyDV *= #$../dvScaleMult$		//return figures are for the return trip only. They will be added to the figures provided in the previous stage.
        @returnFromOrbitDV *= #$../dvScaleMult$
        @returnFromLandingDV *= #$../dvScaleMult$
  }
}

Only problem I have is the following:

https://www.dropbox.com/s/8px537ucaiwsrgq/WCIGBaddvReadings.png?dl=0

Basically, all of my Delta-V values are equivalent to my craft's dV, and none of the values from the config seem to be read.

A snip of the modified config after MM gets done with it looks like this - it's definitely inserting the values as expected:

UrlConfig
{
	parentUrl = WhereCanIGo/WhereCanIGo.cfg
	WHERE_CAN_I_GO
	{
		notes = Automatically Generated Rescale
		warning = Note - these values may be grossly inaccurate.
		colorIfYes = green
		colorIfMarginal = yellow
		colorIfNo = magenta
		dvScaleMult = 3.25960120260132
		BODY
		{
			name = Kerbin
			flybyDV = -3.25960120260132
			orbitDV = 12386.484569885
			synchronousDV = 16020.9399107855
			landDV = -3.25960120260132
			returnFromFlybyDV = -3.25960120260132
			returnFromOrbitDV = 325.960120260132
			returnFromLandingDV = -3.25960120260132
			requireChutes = true
		}
		BODY
		{
			name = Mun
			flybyDV = 15189.7416041222
			orbitDV = 16200.2179769286
			landDV = 18090.7866744373
			returnFromFlybyDV = 0
			returnFromOrbitDV = 1010.47637280641
			returnFromLandingDV = 2901.04507031518
			requireChutes = false
		}
		BODY
		{
			name = Minmus
			flybyDV = 16526.1780971887
			orbitDV = 17047.7142896049
			landDV = 17634.4425060731
			returnFromFlybyDV = 0
			returnFromOrbitDV = 521.536192416211
			returnFromLandingDV = 1108.26440888445
			requireChutes = false
		}

Based on some experimentation, it looks like it REALLY doesn't like the long decimals, and that's what causes it to go wonky - making a patch manually from the MM cache, truncating the values, and applying that instead makes it work as expected. So consider that a bug report. :sticktongue:

With ALL that said... the dV values are WAY too high. Multiplying by the square root of the rescale seems to give values about 2000-3000m/s above what I'd expect. This patch may not be viable after all.

I'll do a bit of poking around and see if I can find something more reliable - I'm sure it's something that RESCALE! is doing that I'm not taking into account in some way, shape, or form (or maybe it just needs to be 10.625x minus 1 before I square root it... hmmm)

Also, this needs to go in the OP.

On 9/29/2019 at 10:11 AM, severedsolo said:

You can now pick the colour of the readouts with a MM Patch


@WHERE_CAN_I_GO
{
	@colorIfYes = green
    @colorIfMarginal = yellow
    @colorIfNo = red
}
//supported colours are any that Unity's Color class will accept (case insensitive). Namely:
                black
                blue
                cyan
                gray/grey (will accept either spelling)
                green
                magenta
                red
                white
                yellow```

severedsolo · September 20, 2020

@etmoonshade It's expecting an int, so passing it a float/double is making it fail. @Poodmund mentioned this to me this morning too, I'll be patching it to accept doubles shortly.

Poodmund · September 20, 2020

@etmoonshade coincidentally I've also being working on this yesterday when I saw the discussion about it get brought up. I made something similar to yourself but it seems to work, as severedsolo mentioned above, due to my patch converting the floats to ints.

// Where Can I Go? - Universal Sigma Dimensions Rescale
// - Poodmund
 
@WHERE_CAN_I_GO:LAST[SigDim2]
{
	// rescaleFactor determines the orbital radius parameter
	rescaleFactor = #$@SigmaDimensions/Rescale$
	@rescaleFactor != 0.5
	
	// resizeFactor determines the celestial body radius parameter
	resizeFactor = #$@SigmaDimensions/Resize$
	@resizeFactor != 0.5
	
	@BODY[*]:HAS[#flybyDV[-1],#landDV[-1],#returnFromFlybyDV[-1],#returnFromLandingDV[-1]]
	{
		// multiply values by rescale/resize parameters
		@orbitDV *= #$../rescaleFactor$
		@synchronousDV *= #$../rescaleFactor$
		@returnFromOrbitDV *= #$../rescaleFactor$
		
		// turn floats into integers for mod compatibility
		@orbitDV = #$orbitDV[0,.]$
		@synchronousDV = #$synchronousDV[0,.]$
		@returnFromOrbitDV = #$returnFromOrbitDV[0,.]$
	}
	@BODY[*]:HAS[~flybyDV[-1],#landDV[-1],#returnFromLandingDV[-1]]
	{
		@flybyDV *= #$../rescaleFactor$
		@orbitDV *= #$../rescaleFactor$
		@synchronousDV *= #$../rescaleFactor$
		@returnFromFlybyDV *= #$../rescaleFactor$
		@returnFromOrbitDV *= #$../rescaleFactor$
		
		@flybyDV = #$flybyDV[0,.]$
		@orbitDV = #$orbitDV[0,.]$
		@synchronousDV = #$synchronousDV[0,.]$
		@returnFromFlybyDV = #$returnFromFlybyDV[0,.]$
		@returnFromOrbitDV = #$returnFromOrbitDV[0,.]$
	}
	@BODY[*]:HAS[~landDV[-1],~returnFromLandingDV[-1]]
	{
		@flybyDV *= #$../rescaleFactor$
		@orbitDV *= #$../rescaleFactor$
		@synchronousDV *= #$../rescaleFactor$
		@landDV *= #$../rescaleFactor$
		@returnFromFlybyDV *= #$../rescaleFactor$
		@returnFromOrbitDV *= #$../rescaleFactor$
		@returnFromLandingDV *= #$../rescaleFactor$
		
		@flybyDV = #$flybyDV[0,.]$
		@orbitDV = #$orbitDV[0,.]$
		@synchronousDV = #$synchronousDV[0,.]$
		@landDV = #$landDV[0,.]$
		@returnFromFlybyDV = #$returnFromFlybyDV[0,.]$
		@returnFromOrbitDV = #$returnFromOrbitDV[0,.]$
		@returnFromLandingDV = #$returnFromLandingDV[0,.]$
	}
}

I've sent the patch to serveredsolo anyway so something will probably make its way into the core mod at some point in the future.

etmoonshade · September 20, 2020

2 hours ago, Poodmund said:

@etmoonshade coincidentally I've also being working on this yesterday when I saw the discussion about it get brought up. I made something similar to yourself but it seems to work, as severedsolo mentioned above, due to my patch converting the floats to ints.


// Where Can I Go? - Universal Sigma Dimensions Rescale
// - Poodmund
 
@WHERE_CAN_I_GO:LAST[SigDim2]
{
	// rescaleFactor determines the orbital radius parameter
	rescaleFactor = #$@SigmaDimensions/Rescale$
	@rescaleFactor != 0.5
	
	// resizeFactor determines the celestial body radius parameter
	resizeFactor = #$@SigmaDimensions/Resize$
	@resizeFactor != 0.5
	
	@BODY[*]:HAS[#flybyDV[-1],#landDV[-1],#returnFromFlybyDV[-1],#returnFromLandingDV[-1]]
	{
		// multiply values by rescale/resize parameters
		@orbitDV *= #$../rescaleFactor$
		@synchronousDV *= #$../rescaleFactor$
		@returnFromOrbitDV *= #$../rescaleFactor$
		
		// turn floats into integers for mod compatibility
		@orbitDV = #$orbitDV[0,.]$
		@synchronousDV = #$synchronousDV[0,.]$
		@returnFromOrbitDV = #$returnFromOrbitDV[0,.]$
	}
	@BODY[*]:HAS[~flybyDV[-1],#landDV[-1],#returnFromLandingDV[-1]]
	{
		@flybyDV *= #$../rescaleFactor$
		@orbitDV *= #$../rescaleFactor$
		@synchronousDV *= #$../rescaleFactor$
		@returnFromFlybyDV *= #$../rescaleFactor$
		@returnFromOrbitDV *= #$../rescaleFactor$
		
		@flybyDV = #$flybyDV[0,.]$
		@orbitDV = #$orbitDV[0,.]$
		@synchronousDV = #$synchronousDV[0,.]$
		@returnFromFlybyDV = #$returnFromFlybyDV[0,.]$
		@returnFromOrbitDV = #$returnFromOrbitDV[0,.]$
	}
	@BODY[*]:HAS[~landDV[-1],~returnFromLandingDV[-1]]
	{
		@flybyDV *= #$../rescaleFactor$
		@orbitDV *= #$../rescaleFactor$
		@synchronousDV *= #$../rescaleFactor$
		@landDV *= #$../rescaleFactor$
		@returnFromFlybyDV *= #$../rescaleFactor$
		@returnFromOrbitDV *= #$../rescaleFactor$
		@returnFromLandingDV *= #$../rescaleFactor$
		
		@flybyDV = #$flybyDV[0,.]$
		@orbitDV = #$orbitDV[0,.]$
		@synchronousDV = #$synchronousDV[0,.]$
		@landDV = #$landDV[0,.]$
		@returnFromFlybyDV = #$returnFromFlybyDV[0,.]$
		@returnFromOrbitDV = #$returnFromOrbitDV[0,.]$
		@returnFromLandingDV = #$returnFromLandingDV[0,.]$
	}
}

I've sent the patch to serveredsolo anyway so something will probably make its way into the core mod at some point in the future.

Oh-ho. Okay, I see how you dealt with truncating the values now. I guess that means nobody needs to answer me in the MM thread now.

Yours is certainly more elegant. Is there a particular reason you bring in both Resize and Rescale though? And, for that matter, any insight into the actual exponent?

Based on some fiddling I did last night, a cube root multiplier is actually way closer to the truth than a square root multiplier. On 10.625x, I get ~12k for launch dV with a square root, but ~8.3k with a cube root. I ended up getting the following actual values:

Body	Calculated dV (^0.333)	Real dV
Kerbin	8354	8450
Mun	10926	11394
Minmus	11498	12121

The big issue is that I haven't tried this with other rescales, but a cube root being SO close makes me think that the post referred to is mistaken somehow.

severedsolo · September 20, 2020

2 minutes ago, etmoonshade said:

Is there a particular reason you bring in both Resize and Rescale though?

Pood and I hashed this out this morning. There is an edge case where Resize and Rescale could be different values and WCIG would fail hard. I've chosen to take the easy route and WCIG will just refuse to do the calculation where that occurs.

Gordon Dry · September 24, 2020

On 9/20/2020 at 2:11 PM, severedsolo said:

I've chosen to take the easy route

Well, I just changed lines 17-19:

		@orbitDV *= #$../resizeFactor$
		@synchronousDV *= #$../resizeFactor$
		@returnFromOrbitDV *= #$../resizeFactor$

On 9/20/2020 at 2:08 PM, etmoonshade said:

Calculated dV (^0.333)

I will also test it.

Wahgineer · November 7, 2020

@etmoonshadeTo think something I posted 4 years ago would come up again. Sorry if it's a little inaccurate, it was very off the cuff math that worked good enough for me at the time.

Edited November 7, 2020 by Wahgineer

etmoonshade · November 8, 2020

On 11/7/2020 at 9:33 AM, Wahgineer said:

@etmoonshadeTo think something I posted 4 years ago would come up again. Sorry if it's a little inaccurate, it was very off the cuff math that worked good enough for me at the time.

For what it's worth, I wasn't calling you out - just testing the values and found that it didn't match what MechJeb was saying.

theleg · June 30, 2021

Will this work with KSP 1.12?

Gordon Dry · November 5, 2021

@theleg It does work on KSP 1.12.2. Somehow.

@severedsolo

I'm on JNSQ - which got configs - but after a sudden I get issues in VAB, no more calculations occurring and a "lie":
"Cannot find config in file : WHERE_CAN_I_GO".

A short time before this happened:

[EXC 23:53:49.386] StackOverflowException: The requested operation caused a stack overflow.

followed by exactly 1000 lines of

VesselDeltaV.ProcessDecouplePartInfoChildren (DeltaVPartInfo partInfoItem, VesselDeltaV+PartStageComparisonOperator comparisonOp, System.Int32 decoupleStage, System.Int32 activationStage, System.Boolean bypassFairings, System.Boolean bypassJettison, System.Boolean setToParentDecoupleStage) (at <cd473063d3a2482f8d93d388d0c95035>:0)

then followed by

    UnityEngine.DebugLogHandler:LogException(Exception, Object)
    ModuleManager.UnityLogHandle.InterceptLogHandler:LogException(Exception, Object)
    UnityEngine.MonoBehaviour:StartCoroutine(IEnumerator)
    VesselDeltaV:<CheckDirtyAndRun>b__68_0()
    <DelayedCallback>d__1:MoveNext()
    UnityEngine.SetupCoroutine:InvokeMoveNext(IEnumerator, IntPtr)

This happened building a Luciole rocket - after I attached the "Honeybee" engine mount, which got 7 nodes for the "Mosquito" engine (1 center, 2x3 radial).

The logs:
https://www.dropbox.com/s/9w3xclcg71siwwo/KSP logs 2021-11-06-01.7z?dl=1

Edit: leaving VAB and reentering fixed the issue - for now

Edited November 5, 2021 by Gordon Dry

Gordon Dry · November 10, 2021

Here is a patch for JNSQ_Rescale_10x which only works if you copy from JNSQ's "Optional Mods\JNSQ_Rescale\Rescale_10X\GameData\JNSQ_Rescale\" into GameData and then rename the folder to JNSQ_Rescale_10x

Put it into GameData\WhereCanIGo\Patches\JNSQ_Rescale_10x.cfg

see
https://github.com/severedsolo/WhereCanIGo/issues/8
https://github.com/severedsolo/WhereCanIGo/issues/9

Edited November 11, 2021 by Gordon Dry
moved to GitHub

tinyspy44 · November 20, 2021

Is this compatible with Outer Planets Mod? If not, would you consider adding compatibility?

[1.12.x] Where Can I Go? The Opposite of a problem 2.2 (02/06/2024)

Recommended Posts

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Join the conversation