Jump to content

Avalanche Plumes (A waterfall Mod for Solid Rocket Boosters)


Kochi

Recommended Posts

  On 7/7/2024 at 11:53 PM, bright Universe said:

thrustCurve of realfuel Can't take effect after adding this mods,Is there something wrong with this mod and realfuel?

:0.0:

Expand  

as i stated before im not currently giving support to any RO mods since the RO comunity has great plume configs on its own 

 

  On 7/6/2024 at 11:48 PM, BSS_Snag said:

It is nice to have srb plumes working again, However unlike most engines with waterfall configs, this one does not  have the rocket plume expansion as you loose atmospheric pressure. The srb plume does change but it doesn't get the expansion you would expect to see, so it stands out against other mods's waterfall plumes.

https://imgur.com/a/kfKmVgl

^ See above the SLS SRB plumes at ASL and at Separation.

 

Other than this issue its great to have srb plumes working again.

Expand  

it does ? can you send a picture of your plume 

Link to comment
Share on other sites

I am at my wits end, I have tried everything I can think of to troubleshoot. But my SRBs have no plumes at all. Currently, all I have installed is Restock 1.4.5, Waterfall 0.2.3, Waterfall Restock 0.2.3, Smokescreen 2.8.14.0, and Avalanche Plumes 1.0.1. I have tried it in both Open GL and DirectX 11. Still, my SRBs are flameless. Please HELP.

https://imgur.com/a/KLPC8rG

Link to comment
Share on other sites

  On 7/11/2024 at 3:12 AM, Maetick said:

I am at my wits end, I have tried everything I can think of to troubleshoot. But my SRBs have no plumes at all. Currently, all I have installed is Restock 1.4.5, Waterfall 0.2.3, Waterfall Restock 0.2.3, Smokescreen 2.8.14.0, and Avalanche Plumes 1.0.1. I have tried it in both Open GL and DirectX 11. Still, my SRBs are flameless. Please HELP.

https://imgur.com/a/KLPC8rG

Expand  

Provide a ksp.log and craft file here for @Kochi to look at. He cant do much to solve the problem without them

 

Link to comment
Share on other sites

  On 7/11/2024 at 3:12 AM, Maetick said:

I am at my wits end, I have tried everything I can think of to troubleshoot. But my SRBs have no plumes at all. Currently, all I have installed is Restock 1.4.5, Waterfall 0.2.3, Waterfall Restock 0.2.3, Smokescreen 2.8.14.0, and Avalanche Plumes 1.0.1. I have tried it in both Open GL and DirectX 11. Still, my SRBs are flameless. Please HELP.

https://imgur.com/a/KLPC8rG

Expand  

yea you need waterfall 0.9.0

  On 7/11/2024 at 11:01 AM, BSS_Snag said:

Provide a ksp.log and craft file here for @Kochi to look at. He cant do much to solve the problem without them

 

Expand  

also do that 

  On 7/11/2024 at 4:44 AM, bright Universe said:

 I add Thrust Curve and minthrust,curveresource in cfg of realfuel.

Expand  

no clue about that 

Link to comment
Share on other sites

@Kochi just letting you know, BDB dev has an updated AJ260. Both bluedog_Saturn_AJ260_Inline and bluedog_Saturn_AJ260_Radial are soft depreciated, and the new one is just bluedog_Saturn_AJ260. It only has a single engine module instead of a separate vernier engine module, and includes thrustFXTransform (detached from gimbals as it's a fixed nozzle) and vernierFXTransform.

Bundled Smokescreen/RP compat is done by manually patching in a 2nd set of particle fx with transformName = vernierFXTransform into the main running effect, since there isn't a second engine module to have it's own running effect.

Link to comment
Share on other sites

  On 7/12/2024 at 2:27 PM, Rodger said:

@Kochi just letting you know, BDB dev has an updated AJ260. Both bluedog_Saturn_AJ260_Inline and bluedog_Saturn_AJ260_Radial are soft depreciated, and the new one is just bluedog_Saturn_AJ260. It only has a single engine module instead of a separate vernier engine module, and includes thrustFXTransform (detached from gimbals as it's a fixed nozzle) and vernierFXTransform.

Bundled Smokescreen/RP compat is done by manually patching in a 2nd set of particle fx with transformName = vernierFXTransform into the main running effect, since there isn't a second engine module to have it's own running effect.

Expand  

yep lmao just saw the update on git 5 minutes ago il update the configs asap

  On 7/11/2024 at 3:13 PM, Maetick said:

Okay, I do actually have Waterfall 0.9.0 that was a typo. I did some testing with several SRBs and still no plumes. Just a glowing nozzle bell, and a smoke trail.

Here is the ksp.log, and the three crafts I tested.

https://drive.google.com/drive/folders/1dYkNdAUgXag4mwzMkfiFz8UP6X_Mh8pI?usp=sharing

 

Expand  

i would suggest reinstalling waterfall and avalanche 

Link to comment
Share on other sites

  On 7/12/2024 at 7:30 PM, Maetick said:

That worked. Thank you. I'm guessing install "waterfall restock" first, then "waterfall" is the correct order. Six hours of troubleshooting and didn't even think of that.

Expand  

oh lmao why didnt you tell me you had that waterfall restock had SRB plumes that were only removed recently so if you had an older version and avalanche it would conflict like that

Link to comment
Share on other sites

  On 7/13/2024 at 4:56 PM, Kochi said:

oh lmao why didnt you tell me you had that waterfall restock had SRB plumes that were only removed recently so if you had an older version and avalanche it would conflict like that

Expand  

I did. In my original post, I listed Waterfall Restock right after Waterfall. Looks like it had an older version of Waterfall bundled with it that overwrote waterfall 0.9.0. But it's working great now. Thank you for the help. :D

 

  On 7/11/2024 at 3:12 AM, Maetick said:

I am at my wits end, I have tried everything I can think of to troubleshoot. But my SRBs have no plumes at all. Currently, all I have installed is Restock 1.4.5, Waterfall 0.2.3, Waterfall Restock 0.2.3, Smokescreen 2.8.14.0, and Avalanche Plumes 1.0.1. I have tried it in both Open GL and DirectX 11. Still, my SRBs are flameless. Please HELP.

https://imgur.com/a/KLPC8rG

Expand  

 

Link to comment
Share on other sites

  On 7/13/2024 at 9:22 PM, Maetick said:

I did. In my original post, I listed Waterfall Restock right after Waterfall. Looks like it had an older version of Waterfall bundled with it that overwrote waterfall 0.9.0. But it's working great now. Thank you for the help. :D

 

 

Expand  

sorry mb

  On 7/14/2024 at 12:30 AM, Krazy1 said:

Don't see it yet...

Expand  

contact the spacedock moderators about it or install it manually 

Link to comment
Share on other sites

  On 7/24/2024 at 9:32 PM, Blufor878 said:

Having an issue where sound doesn’t seem to be working for any of the affected parts. They were mostly working for RSMP. I can provide a log if needed.

Expand  

https://drive.google.com/file/d/1Isxj9OZcuBroD3CSfh3yiF90uK9Z3qfx/view?usp=drive_link
Log in case you guys need it.

Link to comment
Share on other sites

  • 2 weeks later...

Heya folks! Just wanted to ask if the configs for the Atlas V's SRBs are somewhere else? I kept getting the stock plumes when I launched them, and looked into the configs for BDB, and didn't see them listed by name anywhere. I'll update to the latest version of BDB and see if that fixes it, but I'm doubtful.

Please disregard, I'm apparently blind as a bat. Found the configs, but haven't updated BDB to see if that fixes the bug. All the other motors I've tested seem to function correctly.

Edited by Hydragaming
Located "missing" config
Link to comment
Share on other sites

Small note - apparently there's an error in one Avalanche patch, says MM:

[WRN 18:47:42.482] more than one :NEEDS tag detected, ignoring all but the first: Avalanche/Configs/Bluedog_Design_Bureau/Titan_III_Booster_Nozzle_Patch/@PART[bluedog_UA120*]:NEEDS[Bluedog_DB]:NEEDS[Waterfall,Bluedog_DB,!zRealPlume]:AFTER[Bluedog_DB]

Link to comment
Share on other sites

Just saw that Avalanche was updated for the Titan patches that are still in Development for BDB.

Will this break for people who are on the released version of BDB or does this work for both the Released version and the Development version of BDB?

Also thanks!   This mod is awesome!

  On 8/9/2024 at 10:54 PM, AccidentalDisassembly said:

Small note - apparently there's an error in one Avalanche patch, says MM:

[WRN 18:47:42.482] more than one :NEEDS tag detected, ignoring all but the first: Avalanche/Configs/Bluedog_Design_Bureau/Titan_III_Booster_Nozzle_Patch/@PART[bluedog_UA120*]:NEEDS[Bluedog_DB]:NEEDS[Waterfall,Bluedog_DB,!zRealPlume]:AFTER[Bluedog_DB]

Expand  

This might be what I am afraid of

 

Link to comment
Share on other sites

@Kochi  There seem to be two errors in the Bluedog DB patches relating to the Titan III booster.

 

As already pointed out, the file "GameData\Avalanche\Configs\Bluedog_Design_Bureau\Titan_III_Booster_Nozzle_Patch.cfg" has two "NEEDS" sections in the patch header. This causes a warning from Module Manager when loading. Fix:

Change line 1 from this:

@PART[bluedog_UA120*]:NEEDS[Bluedog_DB]:NEEDS[Waterfall,Bluedog_DB,!zRealPlume]:AFTER[Bluedog_DB]

To this:

@PART[bluedog_UA120*]:NEEDS[Waterfall,Bluedog_DB,!zRealPlume]:AFTER[Bluedog_DB]

 

Another error that results in B9 Part Switch throwing multiple errors about missing modules is that the file "GameData\Avalanche\Configs\Bluedog_Design_Bureau\Titan_III_Booster.cfg" is missing a wildcard in the header. Fix:

Change line 1 from this:

@PART[bluedog_UA120]:NEEDS[Waterfall,Bluedog_DB,!zRealPlume]:AFTER[Bluedog_DB]

To this:

@PART[bluedog_UA120*]:NEEDS[Waterfall,Bluedog_DB,!zRealPlume]:AFTER[Bluedog_DB]

 

These two fixes eliminate the warnings from Module Manager and B9 Part Switch.

Link to comment
Share on other sites

yes iv done that bc bdb updated and merged the UA120 Boosters in a single part 

  On 8/11/2024 at 10:46 PM, UnanimousCoward said:

@Kochi  There seem to be two errors in the Bluedog DB patches relating to the Titan III booster.

 

As already pointed out, the file "GameData\Avalanche\Configs\Bluedog_Design_Bureau\Titan_III_Booster_Nozzle_Patch.cfg" has two "NEEDS" sections in the patch header. This causes a warning from Module Manager when loading. Fix:

Change line 1 from this:

@PART[bluedog_UA120*]:NEEDS[Bluedog_DB]:NEEDS[Waterfall,Bluedog_DB,!zRealPlume]:AFTER[Bluedog_DB]

To this:

@PART[bluedog_UA120*]:NEEDS[Waterfall,Bluedog_DB,!zRealPlume]:AFTER[Bluedog_DB]

 

Another error that results in B9 Part Switch throwing multiple errors about missing modules is that the file "GameData\Avalanche\Configs\Bluedog_Design_Bureau\Titan_III_Booster.cfg" is missing a wildcard in the header. Fix:

Change line 1 from this:

@PART[bluedog_UA120]:NEEDS[Waterfall,Bluedog_DB,!zRealPlume]:AFTER[Bluedog_DB]

To this:

@PART[bluedog_UA120*]:NEEDS[Waterfall,Bluedog_DB,!zRealPlume]:AFTER[Bluedog_DB]

 

These two fixes eliminate the warnings from Module Manager and B9 Part Switch.

Expand  

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...