-
Posts
125 -
Joined
-
Last visited
Content Type
Profiles
Forums
Developer Articles
KSP2 Release Notes
Everything posted by DennisB
-
The question is, how it could transmit the science once. Did it happen with a direct connection to the KCS? Then you have to wait, until Minmus rotates to the right position to get connection again, and hope, that the science wants to be transmitted then. Did it happen via the relay satellite? Then you have to wait until it comes to the right position, when the science wants to be transmitted. Maybe you can put your satellite into a higher orbit, so it has connection for a longer period. If nothing helps, you can go back to Minmus, after the experiment has finished, pich it up, and you can recover the science. I don't know, what is in the contract. Do you need to transmit the science?
-
It depends on, how much time you want to spend looking at the open sea during your tour. Last year, I started a Kerbin Naval Elcano with a minimalistic vessel, which could reach over 70m/s on water, but then I decided to do a Jool 5 instead. For that, I designed my Falcon airseaspaceplane, which can reach 80m/s on the water on Laythe, before it gets unstable, and I'm sure, there is still room for improvement.
-
Are your foils adjustable? As I tested my design, I accelerated close to the speed, where it got unstable, changed the inclination, and looked if it made it better or worse. Another question regards the flipping. Are your floats still like in the pictures? Maybe you should make them longer to make flipping less likely. If you look at my plane, the floats have about half the length of the entire plane.
-
Others already mentioned the lack of thrust. I think, another issue is drag in the water. You have the two floats and the main body swimming in the water. I suggest to put the floats deeper, and make them probably larger, so the main body of the plane doesn't touch the water even at zero speed, and put the foils onto the floats. This is my design, which worked on Laythe with the thrust of four fan drives. Water landing and takeoff at 4:00.
-
EVA Construction: Refuelling concept and ideas
DennisB replied to Arief_AK's topic in KSP1 Gameplay Questions and Tutorials
You need two fuel lines (one in each direction). The fuel transfer works only, if it can be done in both directions.- 4 replies
-
- 2
-
-
- eva
- eva construction
-
(and 1 more)
Tagged with:
-
Yes, but I'm not of that kind. I know, the challenge rules allow to do it that way. But for me, it's part of the challenge to build vehicles, which can do the mission reliably, and which I can operate safely. I test out the limits of all my vessels, but it looks like, I didn't test driving on Tylo enough. But now, I have to deal with it. (I was so happy as I finished the 20 hours long tour on Vall without any damage or reloads.) I've already had issues with the projectiles, which were insufficient for Vall and Tylo, but I had a clever solution for it, to save the situation at least at Tylo, which you will see in the next episode. Luckily, I noticed the issues of the spaceplane on Jool before the start, because that could've ruined the whole mission.
-
My Tylo tour doesn't go well. It turned out, that my rover isn't strong enough for Tylo. I had already some explosions, and lost several hours of driving, because I still don't save often enough, and if I load the autosave, it loads the moment immediately after the crash. Now I'm sure, that I can't complete the mission before my vacation, so there will come some weeks of silence here. I will complete the mission for sure, but I'm a little sad, that I can't do it in a manner, like I wanted, and like I did my Eve mission. Before Tylo, I reloaded only 7 times, and only 3 of them were because of my fault. From now, I have to drive very careful or reload more often.
-
EVA Construction/Cargo Parts Issue?
DennisB replied to Scarecrow71's topic in KSP1 Gameplay Questions and Tutorials
Make sure, your construction mode is "place". I had that issue, that nothing happened, as the construction mode somehow switched to "rotate", and the kerbal tried to rotate the storage unit, which was impossible, but then I got a message, that the part can't be edited. -
Episode 10 - Jool (Jun 05-09, Mission Day 278-286) Today we come probably to the highlight of the whole mission. There were already many missions to Jool's moons, but only a few went into Jool's lower atmosphere, and even less did it without a heatshield, so this one is something special. Because of the length of the maneuver, and a lot of trial during the development, it took quite a long time, but finally I got it to work. As I already mentioned, Laythe was more a technical challenge, while Jool is also (or probably more) a piloting challenge, because of the construction of the spaceplane. Overview of the situation The way to Jool Flying on Jool
-
Episode 9 - Leaving Laythe (May 22-23, Mission Day 252-278) In this episode I will finish the mission on Laythe with Falcon's ascent to orbit, which is that part of the mission with the tightest margin of all. Like for the landing on Laythe, for this one I needed many practice runs to find out the right ascend profile and when to switch the engines, because I did it almost 4 months ago for the last time. There's no situation overview necessary, because everything is like at the beginning of the last episode, so let's jump into the whole procedure, there is a lot of stuff to do. The way to orbit Around Laythe
-
Episode 8 - The Vall Tour (May 08-16, Mission day 246-252) After a long break, it's time to continue the mission. I needed some extra motivation, because after driving over 5000km IRL in my car, I wasn't in the mood to drive another 1500km virtually on Vall. But now, it's completed, and the tour on Tylo will be shorter and faster. I completed already the Laythe ascent too, which I planned to include in this episode, but I decided to split it into two parts, because of the length. Overview of the situation Day 1 Day 2
-
FTX-2 for Fuel Transfer. Question.
DennisB replied to LN400's topic in KSP1 Gameplay Questions and Tutorials
For me, it doesn't make sense too. If you want to transfer the fuel only in one direction, one duct should be enough. But it is, like it is. I needed an extensive search on the forum, as I ran into the same problem at my Eve mission. I wanted to transfer fuel from a fuel tank, which I left in orbit, and which I detached later, through the command pod, and was frustrated, why I couldn't do it with a single duct. -
The Ultimate Jool 5 Challenge Continued
DennisB replied to JacobJHC's topic in KSP1 Challenges & Mission ideas
Yes, my calculations are based on the values in the wiki. For example, a surface sample has a base value of 30 and a max value of 40. One copy would give 30 points, 4 copies would give 39,84 points. If it is on Laythe in a splashed situation, it has a multiplier of 12, which would give at the end 478,12 points. Right? Now I'm really curious of my score at the end. -
The Ultimate Jool 5 Challenge Continued
DennisB replied to JacobJHC's topic in KSP1 Challenges & Mission ideas
Congratulations for the result. I said, you will finish before I will. Did you check your science in the archive, if you've got the points for the multiple copies? According to my chart, which I made for my own estimation, you should get for the 706 science reports (4 times each) much more points (+19000). Or my calculations are wrong, but if I calculate it without multiple copies, the result is very close to that, what you have in the screenshot. -
Unable to decouple after docking two vessels.
DennisB replied to Wedge01's topic in KSP1 Gameplay Questions and Tutorials
Fuel flow I think, it's normal. I ran into this problem on my Jool mission. It happens after docking/undocking, if you have a complicated vessel with many stages and complicated fuel flow. The fuel priority has two components, a base value and a correction value. The base value depends on the staging diagram (changing at decoupling and docking), the correction value you can set manually in the VAB or later during the mission (is constant as long as you don't change it). If your staging order changes during the docking process, or if you use high correction values, it can mess up your fuel flow after docking/undocking. Decoupler I have two ideas, but it's only speculation, because it's probably something else. These are just two cases, which I experienced, when I built my Eve rocket. As I had very high part count in the VAB, and unintentionally detached a larger part of the rocket, which I couldn't attach again correctly, I pressed Ctrl+Z to restore, but it seems, the game couldn't handle this with the high part count, and built in an error. My rocket exploded, and as I built it back to find the error, after I removed a special fuel tank, I've got an error message at saving, so I had to rebuild the entire vessel. The second option is, that you maybe made a mistake in the VAB, when you used symmetry or sub-assemblies, but the chance for this is also low, because you say, that you rebuilt your vessel from scratch, so this could only be, if you did both times exactly the same. -
Episode 7 - Laythe and Vall (Part 1) (Mar 28 - Apr 09, Mission Day 238-246) This episode covers the landings on Laythe and Vall and the surface tour on Laythe. It took longer than expected, because IRL stuff held me back, and the game had again new (bad) surprises for me. Before this episode, I had to reload only 2 times, but on Laythe only, I reloaded 4 times, and Falcon is still sitting on the surface. I already know, that I can't complete the mission before my vacation, when I will take a break of two weeks. It's doubtful, that I can complete my tour on Vall before it, and Jool and Tylo must wait for sure, until I'm back again. Overview of the situation At Laythe Landing on Laythe Laythe tour part 1 At Vall Laythe tour part 2
-
It's OK, I know. The reason for my comment wasn't that.
- 38 replies
-
- Performance
- Engine
-
(and 1 more)
Tagged with:
-
Switch off SAS and put the probe core into hibernation mode, except the time, when you execute a maneuver.
-
I was happy back then, that I could build an airplane and a rocket. And of course, if everyone would know the best solution, no one would do something radical different . For my Jool 5 I came one step further. It took a long time, but I could build something like a plane, which can land on Laythe and reach Jool's lower atmosphere. It's still not the hardcore one, because it still looks like a plane, when it reaches orbit again, but overall, it looks more like a plane. At the moment, I'm on Laythe, so you can see it in action very soon. I've tried it on Eve too, just for fun, but it didn't survive the entry. I'm sure, it would need more wing area for the higher gravity.
- 38 replies
-
- 3
-
-
- Performance
- Engine
-
(and 1 more)
Tagged with:
-
Why do you need 4 copies of the EVA report? It gives full science score already for one. Are they really all space science reports? According to my calculation, there should be only 210 available. This reminds me on my tests on Jool. I had the same issue (without flipping), and it looked like this. Exploding nose cones and exploding science jr. Unfortunately, the explosion destroyed the batteries and the reaction wheels too, and as a result, I had a spaceplane, which was uncontrollable in the upper atmosphere and in space.
-
Episode 4 - More space science (Mar 10-19, Mission day 58-118) I planned for this episode to land on Pol and collect all the science there, but because of the bad constellation of the moons, it has to wait. But the mission of Sloth, collecting space science, made good progress, it will fill this episode. Overview of the situation Around Pol Around Laythe Around Vall In the next episode, I will really drive around on the surface of Pol, if we can call that driving .