-
Posts
33 -
Joined
-
Last visited
Content Type
Profiles
Forums
Developer Articles
KSP2 Release Notes
Everything posted by Nyxilo
-
[1.12.x] Kopernicus Stable branch (Last Updated August 29th, 2024)
Nyxilo replied to R-T-B's topic in KSP1 Mod Releases
This worked, but then the stock sun reappears below. I got rid of it by using “givesOffLight = false” but then everything goes dark because the “Sun” doesn't emit light...as expected. Yeah. As in real life, the accretion disk should emit a huge amount of light (not implemented in Singularity) and this is something I want to keep (i.e. use the Sun's light instead of the Disk's). I'll stick with my poor solution for now, I played around a bit with the Light node and the Subscale node but it got me nowhere. In the end it looks like that : (File name is Sun.CFG) -
[1.12.x] Kopernicus Stable branch (Last Updated August 29th, 2024)
Nyxilo replied to R-T-B's topic in KSP1 Mod Releases
I've tried it but it didn't worked because of Scatterer which was applying its effects at the same time. In the end the solution was just to create a Scatterer Sun config and replacing every flare / spikes / ghost by a black pixel. It's a bit of brute-force but it worked. -
[WIP][1.8.x-1.12.x] Singularity - black hole shaders
Nyxilo replied to blackrack's topic in KSP1 Mod Development
I was finally able to fix the problems I had with Singularity, thanks to a messy Scatterer / Kopernicus setup. Using Kopernicus I removed the Corona and using Scatterer I just created a configuration for the Sun and forced the Sunflares into 1x1 black/transparent pixels. https://imgur.com/vLGJ9pz.png As these are standalone files (a .cfg for the patch and all these black pixels with different names), I don't think I can PR on GIthub, so where should I put them? If necessary, of course. I've also included a small setup for a black hole and its textures, borrowed from the EventHorizon mod. -
[1.12.x] Kopernicus Stable branch (Last Updated August 29th, 2024)
Nyxilo replied to R-T-B's topic in KSP1 Mod Releases
Does anyone know how to properly hide the sunflare on a given star ? Using "givesOffLight = False" doesn't work as said in the wiki "Whether the star should emit light and have a LensFlare effect, or whether it's an object like a black hole", it only cuts off the light but leaves the LensFlare in place. The LensFlare is what I'm trying to remove but without any success so far. Is there a parameter I missed ? Note : I need to disable both Scatterer & the Stock Sunflare. -
Yeah, it worked I don't know why some engines have @fx-engine-something-running and others have @fx-engine-something-power Anyway, know eveything's fine, thanks for your fixes
- 769 replies
-
- totm december 2020
- sound effects
-
(and 2 more)
Tagged with:
-
[1.8.x-1.12.x] - RasterPropMonitor (adopted)
Nyxilo replied to JonnyOThan's topic in KSP1 Mod Releases
CKAN works on my side, it registered the 1:v1.0.1 as the latest version, which is the right one, right ? Got an issue with Deferred Rendering conflitcs but it was with Parallax Contined though. -
I think RWE is using the stock layout (maybe ?) with High / Low / Shutdown / Startup sounds for each airbreathing engine However I have no idea what's going on in RSE with the resonnances sounds and stuff Your fix worked absolutely fine on RWE ! Now that I hear correclty the sounds I can tell RSE has pretty nice turbine sounds, but yeah, it's the same for both the Panther and Whiplash Rotos are amazing though Edit : Everything is muffled correctly besides the panthers in Afterburner mode Edit2 : The line "@fx-panther-wet-power{!AUDIO,* {}}" was lacking in your CFG fix, but it stilldidn't change, while supersonic you can hear the full AB in front of the craft, wherehas the rest of the sounds are near inaudible (as it should be)
- 769 replies
-
- totm december 2020
- sound effects
-
(and 2 more)
Tagged with:
-
RWE does modify "only" 15 engines (the 6 Airbreathing + 9 Lox), but the thing is the way audio is used in RSE differs a lot from stock / RWE For example, I don't see a disengage sound in RSE and it looks like it uses sounds as layers rather than complete, full audios
- 769 replies
-
- totm december 2020
- sound effects
-
(and 2 more)
Tagged with:
-
Could something like that work ? If [RWE Detected] then [use RWE_sound.mp3] instead of [RSE_sound.mp3] remove [Stock_audio] I was just thinking about changing the path to the sounds, which means RSE could still apply its effects but with RWE's sounds I'm not familiar at all with the AFTER: LAST: and all that stuff in the CFGs to be honest, usually if i'm opening a CFG it's to edit the atmosphere curves or mach curves of an engine rather than something else x))) Edit : so, one one side RWE is getting rid of the Stock bloc (audio, particles, etc), and on the other side it looks like we could change the audioClip path to force RSE to use RWE's sounds and that's maybe the easy part. The complex one would be, I think, to get rid of RWE's stock (who's already getting rid of Stock ones, etc...) I'm only focusing on the jet engines for now, I don't know if there's a similar issue with rocket engines
- 769 replies
-
- totm december 2020
- sound effects
-
(and 2 more)
Tagged with:
-
[1.8.0-1.12.5] AtmosphereAutopilot 1.6.1
Nyxilo replied to Boris-Barboris's topic in KSP1 Mod Releases
Maybe because AA doesn't like the torque of your engine. I think I had a similar issue and solved it by making everything contraprop. Have you had the issue with a non-prop plane ?- 967 replies
-
- plugin
- fly-by-wire
-
(and 1 more)
Tagged with:
-
totm oct 2023 Post Your Cinematics Here! (Cinematic Enthusiasts)
Nyxilo replied to Halban's topic in KSP Fan Works
Hello there ! Very humble clip from me, I don't know anything about editing but hey, what do you think of the plane itself? -
Ok I'm just stupid. Here's what I saw while testing : https://1drv.ms/v/s!AtylFJmePVdBjLgMrKSSHKNo3Q0izA?e=z8vONr Here's what it should be : https://1drv.ms/v/s!AtylFJmePVdBjLgJcJbTgvyhkVB-dA?e=0Rv2M4 The difference ? Setting the Max Delta-time per physics frame at 0.12 instead of 0.02. Surprinsigly, it works better when the system isn't running at 50%. As a bonus I can cook on my CPU now. Works great now :
-
(Repost from the WIP thread, I think it's more appropriate to ask the question here) TL ; DR: Does anyone have the YF-23 control surface settings on hand? Hello everyone! I've been working on a jet fighter for three years now, and the latest problem I've encountered is really bothering me. I'm trying to make something with the aerodynamics of a brick (I see you, F-4 Phantom) at least decently maneuverable. So far, yaw and pitch are no problem, but roll is... slow, to say the least. As the main wing is very similar to that of the YF-23 (despite the front canards, I know...), I thought I'd use this aircraft - a real one, for once - as a basis for the elevon settings. Here are the specs and current control surface settings, and I'm not sure this is the most relevant. https://imgur.com/a/oAJqBzG The design is done, and apart from a few tweaks here and there, I'm mainly trying to improve the settings, nothing else.
-
totm june 2018 Work-in-Progress [WIP] Design Thread
Nyxilo replied to GusTurbo's topic in KSP1 The Spacecraft Exchange
TL ; DR: Does anyone have the YF-23 control surface settings on hand? Hello everyone! I've been working on a jet fighter for three years now, and the latest problem I've encountered is really bothering me. I'm trying to make something with the aerodynamics of a brick (I see you, F-4 Phantom) at least decently maneuverable. So far, yaw and pitch are no problem, but roll is... slow, to say the least. As the main wing is very similar to that of the YF-23 (despite the front canards, I know...), I thought I'd use this aircraft - a real one, for once - as a basis for the elevon settings. Here are the specs and current control surface settings, and I'm not sure this is the most relevant. https://imgur.com/a/oAJqBzG The design is done, and apart from a few tweaks here and there, I'm mainly trying to improve the settings, nothing else. -
So, this means using Resurfaced alongside Textures Unlimited Recolour Depot is pointless, right ?
-
Do you think something similar could be happening with RestockWaterfallExpansion ? I've looked into the .cfgs, doesn't seem to use LAST but RWE does in fact replace the stock audio with custom ones (better than those from RSE in my opinion) RWE doesn't use SWE (only Waterfall Core and Restock as dependancies, everything installed trhough CKAN). When I have RSE & RWE installed at the same time, RWE isn't affected at all by RSE and I hear both of them / RWE at full sound when RSE is muffled. The best of both worlds would be to apply RSE's effects to RWE's sounds (so, replacing RSE's jet engines sounds with RWE, said in another way). I am dreaming ?
- 769 replies
-
- totm december 2020
- sound effects
-
(and 2 more)
Tagged with:
-
[1.8.x-1.12.x] - RasterPropMonitor (adopted)
Nyxilo replied to JonnyOThan's topic in KSP1 Mod Releases
Does this mean we could hope for a RealFuels compatibility in the future ? It seems the new update works fine with KSA IVA, I got no issues with the MK1 Inline and the MK1 standard cockpits. -
Hi, I'm currently using AtomicTech's RestockWaterfallExpansion which has included Linuxgurugamer's Jet Sounds Updated since this year. It seems now that RWE and RSE are in conflict, so I was wondering if a compatibility patch could be released, i.e. when RWE is installed, using their sounds instead of RSE's. The muffling effect and mach bang are really nice features on this mod Edit: it seems that JSU/RWE sounds are also unaffected by RSE and are always played at full volume, while other sounds are muffled.
- 769 replies
-
- totm december 2020
- sound effects
-
(and 2 more)
Tagged with:
-
[1.12.x] Kopernicus Stable branch (Last Updated August 29th, 2024)
Nyxilo replied to R-T-B's topic in KSP1 Mod Releases
Hey, I have an issue using Singularity - the Sunflare isn't properly hidden. A while ago I've made a small config (thanks to @OhioBob) to remove the Sun's Corona, so i was wondering if there was a way to do the same with a Sunflare. Also, I'm using Scatterer, so the Sunflare I'm seeing is certainly not the stock one. Any Ideas ? -
It seems that the dependencies haven't been updated on CKAN... Right ?
-
[1.8.x-1.12.x] - RasterPropMonitor (adopted)
Nyxilo replied to JonnyOThan's topic in KSP1 Mod Releases
LiquidFuel is replaced by Kerosene for all the airbreathing engines - excluding the RAPIER which uses LiquidMethane instead - however for the rocket engines it depends on their configs, some use Kerosene, others Aerozine50 and so on. Oxidizer also is replaced by LiquidOxygen for most of the engines (including the RAPIER). Stock ressources are still available for fuels tank though. -
[1.8.x-1.12.x] - RasterPropMonitor (adopted)
Nyxilo replied to JonnyOThan's topic in KSP1 Mod Releases
Hello, I am currently using KSA IVA Upgrade alongside RealFuels and, as the latter replaces LiquidFuel with Kerosene for the engines, the fuel and flow gauges do not display the correct amount / flow of fuel. This is a minor detail, as the KSP's own HUD is minimal in the IVA and can be left on to display fuel values and stuff, but I was wondering if this could be an easy compatibility fix or not. If it's out of place and only related to KSA, let me know and I'll ask there. -
[1.12.x] Parallax - PBR Terrain and Surface Objects [2.0.8]
Nyxilo replied to Gameslinx's topic in KSP1 Mod Releases
Thank you! I've set the Reflection Refresh Mode to Low (everything looks horrible if disabled) with all the other settings cranked all the way up, and it works perfectly. And, apart from the huge performance impact between "Low" and "Every Frame" mode, I don't really see any difference. I'll stick with it until the problem is - perhaps - solved.- 3,087 replies
-
- totm oct 2022
- terrain scatters
-
(and 3 more)
Tagged with:
-
[1.12.x] Parallax - PBR Terrain and Surface Objects [2.0.8]
Nyxilo replied to Gameslinx's topic in KSP1 Mod Releases
Hi, I've been using Parallax for a while and have noticed a - somewhat annoying - quirk with the lights on my setup (Ryzen 7 3700X / RTX3070 Ti / 48GB of RAM). Here are the tests I did: - Random test bench made from reactors and lights (with emission enabled as I use them as spotlights / navigation lights usually), - Pixel Light Count at 64, - Tests on Stock, Stock & Parallax, Stock & Parallax & Deferred instances. In Stock I'm running at 38 FPS (perfectly fine), in Stock + Parallax I drop to 18 as soon as the lights are on and in Stock + Parallax + Deferred I drop to 21 with lights then 18 with lights and engines (Whiplash / Panther on AB). Playing with the Pixel Light Count improves performance (at 0 I'm at 38 FPS) but also makes the lights disappear, which I don't want. Obviously, getting rid of Parallax solves all the issues - and I can run at 38 on a fully graphics modded instance - but it would be a shame to go without such a mod. I've tried playing with the Parallax settings but I don't want to mess it up. If anyone has any advice, I'd love to hear it.- 3,087 replies
-
- totm oct 2022
- terrain scatters
-
(and 3 more)
Tagged with:
-
JSU and RWE now work together like a charm, thanks !
- 125 replies
-
- 1