zer0Kerbal Posted August 28, 2019 Share Posted August 28, 2019 1 minute ago, blowfish said: Other mods use a ModuleManager patch targeting multiple parts to install the same module multiple times. Maybe that would make sense here? Am already doing that, just wanted to know if could eliminate many points of possible failure by seeing if certain things could be inherited, and some are. Just asking for the rest to be able to be inherited as well. Maybe just something to consider implementing in the future. Quote Link to comment Share on other sites More sharing options...
blowfish Posted August 28, 2019 Author Share Posted August 28, 2019 (edited) 4 minutes ago, zer0Kerbal said: Am already doing that, just wanted to know if could eliminate many points of possible failure by seeing if certain things could be inherited, and some are. Just asking for the rest to be able to be inherited as well. Maybe just something to consider implementing in the future. I could almost consider adding title, descriptionSummary, descriptionDetail to B9_TANK_TYPE to provide defaults for the SUBTYPE. But I think you're talking about adding a templating system for entire switcher modules, which is an entirely different thing and a much bigger undertaking. oh and P.S. you don't need to set affectDragCubes 90% of the time. If there's no mesh switching it won't try to re-render drag cubes. Edited August 28, 2019 by blowfish Quote Link to comment Share on other sites More sharing options...
zer0Kerbal Posted August 28, 2019 Share Posted August 28, 2019 5 minutes ago, blowfish said: I could almost consider adding title, descriptionSummary, descriptionDetail to B9_TANK_TYPE to provide defaults for the SUBTYPE. But I think you're talking about adding a templating system for entire switcher modules, which is an entirely different thing and a much bigger undertaking. oh and P.S. you don't need to set affectDragCubes 90% of the time. If there's no mesh switching it won't try to re-render drag cubes. just the first part. tank types is already a template, just want to extent a couple more things into it. Just was asking for the smaller undertaking. good to know that. Quote Link to comment Share on other sites More sharing options...
Damon Posted August 29, 2019 Share Posted August 29, 2019 Mmmmmmodule Switching... Yisss Quote Link to comment Share on other sites More sharing options...
RealKerbal3x Posted August 29, 2019 Share Posted August 29, 2019 44 minutes ago, damonvv said: Mmmmmmodule Switching... Yisss Maybe this could be used on the Tundra Exploration Gojira to switch between transpiration cooling and thermal tiling, for people who want to use it... Just a thought, but I think this could make it possible Quote Link to comment Share on other sites More sharing options...
Zuldwyn Posted August 31, 2019 Share Posted August 31, 2019 (edited) Caused my game to crash with space station parts redux installed, caused parts from other mods to stop even working. Uninstalled b9 and my game works like a charm again. Not sure what the mod author was going for here feel like they were trying to break my game lol. http://prntscr.com/ozt6b4 here’s the crash when using space station parts redux. EDIT: the parts it caused to stop showing up were from mods that supported this and included b9 in their install files. The work fine without it. Edited August 31, 2019 by Zuldwyn Quote Link to comment Share on other sites More sharing options...
blowfish Posted August 31, 2019 Author Share Posted August 31, 2019 (edited) 1 hour ago, Zuldwyn said: Caused my game to crash with space station parts redux installed, caused parts from other mods to stop even working. Uninstalled b9 and my game works like a charm again. Not sure what the mod author was going for here feel like they were trying to break my game lol. http://prntscr.com/ozt6b4 here’s the crash when using space station parts redux. EDIT: the parts it caused to stop showing up were from mods that supported this and included b9 in their install files. The work fine without it. Pretty sure you will start to see some problems if you install a mod that requires B9PartSwitch and no B9PartSwitch If you re-install it and provide your full log I can point to where the issue lies. Either something is installed incorrectly or an unexpected combination of mods is causing a ModuleManager patch to fail. Either way, I will get to the bottom of it if you let me. E: So apparently you also have mods installed that require Community Resource Pack but don't have that installed. That would definitely cause issues. Edited August 31, 2019 by blowfish Quote Link to comment Share on other sites More sharing options...
N3N Posted August 31, 2019 Share Posted August 31, 2019 Hey, I'm getting this Errors in my logs: Quote 190831T165045.698 [ERROR] [B9PartSwitch.B9TankSettings.ReloadTankDefs] B9TankSettings: The tank type LiquidFuel already exists 190831T165045.701 [ERROR] [B9PartSwitch.B9TankSettings.ReloadTankDefs] B9TankSettings: The tank type LFO already exists 190831T165045.706 [ERROR] [B9PartSwitch.B9TankSettings.ReloadTankDefs] B9TankSettings: The tank type LiquidFuel already exists 190831T165045.708 [ERROR] [B9PartSwitch.B9TankSettings.ReloadTankDefs] B9TankSettings: The tank type LFO already exists 190831T165045.716 [ERROR] [B9PartSwitch.B9TankSettings.ReloadTankDefs] B9TankSettings: The tank type OX already exists 190831T165045.718 [ERROR] [B9PartSwitch.B9TankSettings.ReloadTankDefs] B9TankSettings: The tank type LF already exists 190831T165045.720 [ERROR] [B9PartSwitch.B9TankSettings.ReloadTankDefs] B9TankSettings: The tank type LFOX already exists 190831T165045.722 [ERROR] [B9PartSwitch.B9TankSettings.ReloadTankDefs] B9TankSettings: The tank type Xenon already exists Are they a problem? And than I got this "Serious Warning"" when loading KSP: And I'm getting this Warnings in my logs: Quote [WRN 16:53:22.459] Warning on PartSubtype None on module ModuleB9PartSwitch (moduleID='meshSwitch') on part unknownPart: No transforms named 'BareEngine' found [WRN 16:53:22.557] Warning on PartSubtype None on module ModuleB9PartSwitch (moduleID='meshSwitch') on part bluedog.LR87.SingleChamberB: No transforms named 'BareEngine' found [WRN 16:53:23.396] Warning on PartSubtype Radial on module ModuleB9PartSwitch (moduleID='meshSwitch') on part unknownPart: No transforms named 'Radial' found [WRN 16:53:23.397] Warning on PartSubtype Inline on module ModuleB9PartSwitch (moduleID='meshSwitch') on part unknownPart: No transforms named 'Inline' found [WRN 16:53:23.465] Warning on PartSubtype Radial on module ModuleB9PartSwitch (moduleID='meshSwitch') on part bluedog.Titan.SRB3seg: No transforms named 'Radial' found [WRN 16:53:23.471] Warning on PartSubtype Inline on module ModuleB9PartSwitch (moduleID='meshSwitch') on part bluedog.Titan.SRB3seg: No transforms named 'Inline' found [WRN 16:55:15.560] Warning on PartSubtype Bearing on module ModuleB9PartSwitch (moduleID='mount') on part unknownPart: No transforms named 'ht2_truss_trussConnectorBearing_colliders' found [WRN 16:55:15.620] Warning on PartSubtype Bearing on module ModuleB9PartSwitch (moduleID='mount') on part ht2.trussPort: No transforms named 'ht2_truss_trussConnectorBearing_colliders' found So how do I fix this? My Logs: https://www.tancredi.nl/downloads/logs.zip Do you need more information? Quote Link to comment Share on other sites More sharing options...
Zuldwyn Posted August 31, 2019 Share Posted August 31, 2019 (edited) 17 hours ago, blowfish said: Pretty sure you will start to see some problems if you install a mod that requires B9PartSwitch and no B9PartSwitch If you re-install it and provide your full log I can point to where the issue lies. Either something is installed incorrectly or an unexpected combination of mods is causing a ModuleManager patch to fail. Either way, I will get to the bottom of it if you let me. E: So apparently you also have mods installed that require Community Resource Pack but don't have that installed. That would definitely cause issues. Thanks man that was the issue, I don’t remember ever installing anything that needed that. Edited August 31, 2019 by Zuldwyn Quote Link to comment Share on other sites More sharing options...
Wyzard Posted September 1, 2019 Share Posted September 1, 2019 8 hours ago, Zuldwyn said: I don’t remember ever installing anything that needed that. CommunityResourcePack is included with several of Nertea's Near Future mods (Propulsion, Electrical, and Aeronautics). I'm guessing you're using those, since you posted in that thread saying B9PartSwitch broke your game. Quote Link to comment Share on other sites More sharing options...
N3N Posted September 1, 2019 Share Posted September 1, 2019 17 hours ago, N3N said: Hey, I'm getting this Errors in my logs: Are they a problem? And than I got this "Serious Warning"" when loading KSP: And I'm getting this Warnings in my logs: So how do I fix this? My Logs: https://www.tancredi.nl/downloads/logs.zip Do you need more information? Hello, So for one of my "Serious Warning", I found an answer here: Quote Link to comment Share on other sites More sharing options...
linuxgurugamer Posted September 13, 2019 Share Posted September 13, 2019 Is it possible to use B9PartSwitch to change the scale of a model? Specifically, I'd like to change the length and width, but leave height alone. Not clear from the docs Quote Link to comment Share on other sites More sharing options...
blowfish Posted September 13, 2019 Author Share Posted September 13, 2019 1 hour ago, linuxgurugamer said: Is it possible to use B9PartSwitch to change the scale of a model? Specifically, I'd like to change the length and width, but leave height alone. Not clear from the docs You already asked for this, I just haven't gotten to it yet. But based on what you're saying now different scaling on each axis is required. Quote Link to comment Share on other sites More sharing options...
linuxgurugamer Posted September 13, 2019 Share Posted September 13, 2019 8 hours ago, blowfish said: You already asked for this, I just haven't gotten to it yet. But based on what you're saying now different scaling on each axis is required. Your right, i forgot. Sorry. I’m working on a new project, and ran into the same problem as before. Quote Link to comment Share on other sites More sharing options...
blowfish Posted September 14, 2019 Author Share Posted September 14, 2019 13 hours ago, linuxgurugamer said: Your right, i forgot. Sorry. I’m working on a new project, and ran into the same problem as before. No problem on hearing it again though, part of how I gauge the value of new features is trying to see how often they'll be used. If you have another use case then that's another reason to build it. Quote Link to comment Share on other sites More sharing options...
linuxgurugamer Posted September 14, 2019 Share Posted September 14, 2019 26 minutes ago, blowfish said: No problem on hearing it again though, part of how I gauge the value of new features is trying to see how often they'll be used. If you have another use case then that's another reason to build it. For now I'll either provide multiple part files, or get the object in each .mu file renamed so that the stock Variants can handle it Quote Link to comment Share on other sites More sharing options...
Pointblank66 Posted September 14, 2019 Share Posted September 14, 2019 (edited) Found a set of problems with B9 and BDB. They are in line 13867 through 13892 within my KSP log. Here is the link to that. https://drive.google.com/open?id=1XSFMQkUgLoLKybwryqzRRVJUoM--n5oQ <- kps log Spoiler [WRN 00:28:38.993] Warning on PartSubtype None on module ModuleB9PartSwitch (moduleID='meshSwitch') on part unknownPart: No transforms named 'BareEngine' found [LOG 00:28:38.998] PartLoader: Part 'Bluedog_DB/Parts/Titan/bluedog_LR87_SingleChamberB/bluedog_LR87_SingleChamberB' has no database record. Creating. [LOG 00:28:39.006] DragCubeSystem: Creating drag cubes for part 'bluedog.LR87.SingleChamberB' [WRN 00:28:39.049] Warning on PartSubtype None on module ModuleB9PartSwitch (moduleID='meshSwitch') on part bluedog.LR87.SingleChamberB: No transforms named 'BareEngine' found [WRN 00:28:39.055] DontDestroyOnLoad only work for root GameObjects or components on root GameObjects. [LOG 00:28:39.061] PartLoader: Compiling Part 'Bluedog_DB/Parts/Titan/bluedog_LR87_SingleChamberVac/bluedog_LR87_SingleChamberVac' [LOG 00:28:39.089] PartLoader: Part 'Bluedog_DB/Parts/Titan/bluedog_LR87_SingleChamberVac/bluedog_LR87_SingleChamberVac' has no database record. Creating. [LOG 00:28:39.098] DragCubeSystem: Creating drag cubes for part 'bluedog.LR87.SingleChamberVac' [LOG 00:28:39.150] PartLoader: Compiling Part 'Bluedog_DB/Parts/Titan/bluedog_LR91_mod1/bluedog_LR91_mod1' [LOG 00:28:39.183] PartLoader: Part 'Bluedog_DB/Parts/Titan/bluedog_LR91_mod1/bluedog_LR91_mod1' has no database record. Creating. [LOG 00:28:39.193] DragCubeSystem: Creating drag cubes for part 'bluedog.LR91.mod1' [LOG 00:28:39.235] PartLoader: Compiling Part 'Bluedog_DB/Parts/Titan/bluedog_LR91_mod2/bluedog_LR91_mod2' [LOG 00:28:39.261] PartLoader: Part 'Bluedog_DB/Parts/Titan/bluedog_LR91_mod2/bluedog_LR91_mod2' has no database record. Creating. [LOG 00:28:39.267] DragCubeSystem: Creating drag cubes for part 'bluedog.LR91.mod2' [LOG 00:28:39.316] PartLoader: Compiling Part 'Bluedog_DB/Parts/Titan/bluedog_LR91_mod4/bluedog_LR91_mod4' [LOG 00:28:39.342] PartLoader: Part 'Bluedog_DB/Parts/Titan/bluedog_LR91_mod4/bluedog_LR91_mod4' has no database record. Creating. [LOG 00:28:39.348] DragCubeSystem: Creating drag cubes for part 'bluedog.LR91.mod4' [LOG 00:28:39.398] PartLoader: Compiling Part 'Bluedog_DB/Parts/Titan/bluedog_SMRU/bluedog_Titan_SRB3seg' [WRN 00:28:39.423] Warning on PartSubtype Radial on module ModuleB9PartSwitch (moduleID='meshSwitch') on part unknownPart: No transforms named 'Radial' found [WRN 00:28:39.423] Warning on PartSubtype Inline on module ModuleB9PartSwitch (moduleID='meshSwitch') on part unknownPart: No transforms named 'Inline' found [LOG 00:28:39.429] PartLoader: Part 'Bluedog_DB/Parts/Titan/bluedog_SMRU/bluedog_Titan_SRB3seg' has no database record. Creating. [LOG 00:28:39.436] DragCubeSystem: Creating drag cubes for part 'bluedog.Titan.SRB3seg' [WRN 00:28:39.453] Warning on PartSubtype Radial on module ModuleB9PartSwitch (moduleID='meshSwitch') on part bluedog.Titan.SRB3seg: No transforms named 'Radial' found [WRN 00:28:39.455] DontDestroyOnLoad only work for root GameObjects or components on root GameObjects. [WRN 00:28:39.455] Warning on PartSubtype Inline on module ModuleB9PartSwitch (moduleID='meshSwitch') on part bluedog.Titan.SRB3seg: No transforms named 'Inline' found [WRN 00:28:39.456] DontDestroyOnLoad only work for root GameObjects or components on root GameObjects. My installment was pretty clean, only installed the following, with their dependencies. Tweakscale 2.4.2 AVP and AVP 8k Textures 3.8.3 B9 Part switch 2.10 BDB 1.5.2 Community Resource Pack 1.2 DM Module Science Animate Generic 0.21EVE 1.7.3 Kabrams Sunflare Blue High 0.0.1 Module Manager 4.0.3 NF IVA props 0.5.1 Scatterer + Default config 0.0540 Texture Replacer 3.7 ----------------------------------------------------------------------------------------- If you need anything more, just say so and I'll make a google drive link for it Edited September 15, 2019 by Pointblank66 Quote Link to comment Share on other sites More sharing options...
KIMCHI Posted September 21, 2019 Share Posted September 21, 2019 (edited) Im getting my usual B9 error but all of the sudden I can't click OK to make the box disappear. Is there another way to make the error box disappear? I can't play the game now. It seems everything is running fine behind the error box I just can't click OK like I normally have been doing. Edited September 21, 2019 by KIMCHI Quote Link to comment Share on other sites More sharing options...
blowfish Posted September 21, 2019 Author Share Posted September 21, 2019 3 hours ago, KIMCHI said: Im getting my usual B9 error but all of the sudden I can't click OK to make the box disappear. Is there another way to make the error box disappear? I can't play the game now. It seems everything is running fine behind the error box I just can't click OK like I normally have been doing. Does the OK button appear but doesn't do anything, or does it not appear? Maybe the window is ending up taller than the screen? I guess a screenshot might be helpful. Quote Link to comment Share on other sites More sharing options...
KIMCHI Posted September 21, 2019 Share Posted September 21, 2019 I can't click the OK button. The Box is in the middle of the screen I can see the entire box, clicking the OK button does nothing. https://1drv.ms/u/s!ApS4szxClp5oiJYzeOgEZEr0qxFx-A?e=dBm8iP Quote Link to comment Share on other sites More sharing options...
blowfish Posted September 22, 2019 Author Share Posted September 22, 2019 3 hours ago, KIMCHI said: I can't click the OK button. The Box is in the middle of the screen I can see the entire box, clicking the OK button does nothing. https://1drv.ms/u/s!ApS4szxClp5oiJYzeOgEZEr0qxFx-A?e=dBm8iP Hmm, could you provide your log after running KSP, seeing this, and then clicking OK? Maybe something unexpected is happening when you click that. Quote Link to comment Share on other sites More sharing options...
blowfish Posted September 30, 2019 Author Share Posted September 30, 2019 B9PartSwitch v2.10.1 for KSP 1.7.3 Add missing Russian localization keys Fix surface attach node modifiers not actually doing anything Fix surface attach node modifiers checking whether the part allows surface attach to it rather than to parent part Quote Link to comment Share on other sites More sharing options...
zer0Kerbal Posted September 30, 2019 Share Posted September 30, 2019 47 minutes ago, blowfish said: B9PartSwitch v2.10.1 for KSP 1.7.3 Add missing Russian localization keys Fix surface attach node modifiers not actually doing anything Fix surface attach node modifiers checking whether the part allows surface attach to it rather than to parent part :like: + Quote Link to comment Share on other sites More sharing options...
Jaiders Posted October 10, 2019 Share Posted October 10, 2019 logs: http://m.uploadedit.com/bbtc/1570747476854.txt https://gyazo.com/c5780baa743303175b6858f3d9a80640 i don't know what is wrong i was hoping i could get a little help Quote Link to comment Share on other sites More sharing options...
blowfish Posted October 11, 2019 Author Share Posted October 11, 2019 2 hours ago, Jaiders said: logs: http://m.uploadedit.com/bbtc/1570747476854.txt https://gyazo.com/c5780baa743303175b6858f3d9a80640 i don't know what is wrong i was hoping i could get a little help Found it in the log ... you have installed B9_Aerospace_Legacy without the rest of B9 (HX does not require it but legacy does) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.