[1.3.0] Kerbal Engineer Redux 1.1.3.0 (2017-05-28)

[Tyko]

I'm trying to use RCS thrusters as primary engines on a craft. They're not showing up in the KER staging or DV readouts though. I have the RCS thrusters set to "Fore by Throttle".

Is there a way to get them to show up?

[Flibble]

3 hours ago, Tyko said:

I'm trying to use RCS thrusters as primary engines on a craft. They're not showing up in the KER staging or DV readouts though. I have the RCS thrusters set to "Fore by Throttle".

Is there a way to get them to show up?

In the VAB click the RCS button.

In flight RCS has a separate display to normal engines - it should be under the vessel tab (I think), or you can add it from the edit panels.

[Gordon Dry]

The RCS button in VAB sometimes works, sometimes not.

It becomes especially problematic when using RealFuels and RealismOverhaul.

[Jognt]

If the RCS button ignores me it usually wakes up if I toggle the “All Stages” button. 

[Gordon Dry]

@Jognt worth an issue report

[Jognt]

26 minutes ago, Gordon Dry said:

@Jognt worth an issue report

I only do issue reports when I'm damned sure I checked to see if I could reproduce a problem. Nobody wakes up thinking "Gee, I wish I could research an unconfirmed issue about something 'sometimes' not working 'maybe'!".

Feel free to narrow it down, but I'm not going to point a finger here. I don't have the time to make sure I can do a proper report atm.

Edited July 3, 2019 by Jognt

[Krzysztof z Bagien]

Deleting a section should require confirmation - I accidentaly clicked "delete" button and had to create "Randezvous" from scratch 

Also, changing size via GUI size selector buttons resets colour of all entries to default green.

[Gordon Dry]

@Krzysztof z Bagien ofc you're right, but you could have created backups of the files inside GameData\KerbalEngineer\Settings\ as well

[Jognt]

5 hours ago, Krzysztof z Bagien said:

Deleting a section should require confirmation - I accidentaly clicked "delete" button and had to create "Randezvous" from scratch 

Also, changing size via GUI size selector buttons resets colour of all entries to default green.

Yeah I can see how that would be a surprise! I'd have just reinstalled the whole mod, I admire your dedication to recreating it manually!

[Homer_S]

Anyone have an issue with the text going wonky? It was working fine under 1.7.3 and then all of a sudden the window in the editor cannot be resized/moved and it is about half the size it needs to be so it becomes unreadable. At the same time, the in-flight HUDs are about half the right width and are four times taller. Makes it super hard to read.

Homer

[Krzysztof z Bagien]

On 7/24/2019 at 4:20 PM, Jognt said:

Yeah I can see how that would be a surprise! I'd have just reinstalled the whole mod, I admire your dedication to recreating it manually!

Well, I have a lot of other things customised, so it was faster that way

 

On 7/24/2019 at 2:13 PM, Gordon Dry said:

@Krzysztof z Bagien ofc you're right, but you could have created backups of the files inside GameData\KerbalEngineer\Settings\ as well

Yeah, I know. I guess it's true that there are two types of people - those who backup, and those who will backup

[pmborg]

Hello cybutek,

Congratulations for your excellent mod, but I found a problem on this function:

FILE: BuildAdvanced.cs #line 415

        private void DrawBurnTime()
        {
            GUILayout.BeginVertical(GUILayout.Width(75.0f * GuiDisplaySize.Offset));
            GUILayout.Label("BURN", titleStyle);
            for (int i = 0; i < stagesLength; ++i)
            {
                stage = stages;
                if (showAllStages || stage.deltaV > 0.0)
                {
                    GUILayout.Label(TimeFormatter.ConvertToString(stage.time), infoStyle);
                }
            }
            GUILayout.EndVertical();
        }

If the burn time is bigger than 24h, the value will be zero, can you please fix it? or just print on console log the stage.time

 

Many thanks in advance!

 

Edited August 16, 2019 by pmborg

[stratvox]

Hey folks, I decided to get back into KSP after a long hiatus, and I'm having a problem with the latest version of KER (i.e. the one on jrbudda's github). It is active and works in the Tracking Station, but the button is greyed out in the VAB and while in flight so I can't use it. KSP with both DLCs. Any ideas what's going on?

[Jognt]

9 hours ago, stratvox said:

Hey folks, I decided to get back into KSP after a long hiatus, and I'm having a problem with the latest version of KER (i.e. the one on jrbudda's github). It is active and works in the Tracking Station, but the button is greyed out in the VAB and while in flight so I can't use it. KSP with both DLCs. Any ideas what's going on?

It works fine on my 1.7.3 install , other than that I don’t know how to troubleshoot further than ‘reinstall’, sorry. 

[Aethon]

Does anyone know where to comment on jrbuddas' KER fork for KSP 1.7.  I'm having the same problem as Homer above.

 

[Kadrush]

On 8/25/2019 at 10:16 AM, stratvox said:

Hey folks, I decided to get back into KSP after a long hiatus, and I'm having a problem with the latest version of KER (i.e. the one on jrbudda's github). It is active and works in the Tracking Station, but the button is greyed out in the VAB and while in flight so I can't use it. KSP with both DLCs. Any ideas what's going on?

I second this issue, it started today and is related to this mod. The only thing I have done today was to install some USI mods that were updated to the current version of the game. Uninstalled everything and did a fresh install of the game and mods, same issue.

 

When I click the rendevouz button the mod bug and the grey bar shows up along other graphical glitches, the game gets slow, really slow and get stuck on the loading screen once i leave the ship. The planets move on the loading button, but it do not get anywhere.

 

Maybe is some change on the module manager or other support mod that got incompatible with this one?

Edit: Tried an older version the mod from github, same issue.

 

Edit 2: Dont ask me why, BUT I FOUND THE ISSUE. There is an incompatibility between this mod and Transfer Window Planner that got updated today. I removed it and it is solved.

Edited August 27, 2019 by Kadrush
found the issue

[bobisback]

Is it possible/easy to display the heat information, surface information, and vessel information from this on a RPM screen?

[jrbudda]

Will update to 1.8 tomorrow, lemme know if there's any issues you find.

[Anth]

Thanks @jrbudda Thanks for looking after this mod. Its my favorite

Edited October 17, 2019 by Anth12

[therealcrow999]

I'm getting something weird, the Hud 1 and 2 don't keep their transparency when I set it. Sometimes one works but the other one doesn't. If I set them that way and put each hud in its own area on the screen, if I leave game and come back in they will be jointly together and not transparent anymore.

[Anth]

Version of KSP? KER that worked with 1.7.3 is not compatible with 1.8

[jrbudda]

Update for 1.8 is now on github. Please let me know of additional issues. 

[peteletroll]

Lots of exceptions! Log file here.

[peteletroll]

And, by the way, since previous version, collapsing the editor window to the right puts the window in a wrong place.

[jrbudda]

Update 1.1.7.1 is out, fixes the impact marker.