[1.12.5] Restock - Revamping KSP's art (August 28)

[arqui_alpaka]

Hello
I think the problem comes from this mod, and it's the following image (ksp doesn't show me any "ksp.log")
I think the problem is caused by some mod in my mod soup
But I really have no idea which one causes it, since "Restock and Restock+" are the only mods I have that modify the game models
This only happens in the editor, during a flight it works correctly, but it is annoying to have to design with a transparent hitbox
I think only with that piece, so far I have not found any other problem
 

[Brigadier]

On 12/1/2024 at 9:10 PM, arqui_alpaka said:

I think the problem comes from this mod, and it's the following image (ksp doesn't show me any "ksp.log")

On Windows, the log is stored at %USERPROFILE%\AppData\LocalLow\Squad\Kerbal Space Program\Player.log.  KSP always produces a log file unless there's some catastrophic failure on start.

[SchwinnTropius]

On 12/1/2024 at 8:10 PM, arqui_alpaka said:

Hello
I think the problem comes from this mod, and it's the following image (ksp doesn't show me any "ksp.log")
I think the problem is caused by some mod in my mod soup
But I really have no idea which one causes it, since "Restock and Restock+" are the only mods I have that modify the game models
This only happens in the editor, during a flight it works correctly, but it is annoying to have to design with a transparent hitbox
I think only with that piece, so far I have not found any other problem
 

Any chance you have Parallax somewhere in that mod soup? This happens to me with Parallax and Restock installed. Since the launch clamps are useful only on launch (and quite good at the job), I can accept the sacrifice for the better visuals outside.

[arqui_alpaka]

5 hours ago, SchwinnTropius said:

¿Hay alguna posibilidad de que tengas Parallax en algún lugar de esa sopa de mods? Esto me pasa con Parallax y Restock instalados. Dado que las abrazaderas de lanzamiento son útiles solo en el lanzamiento (y bastante buenas en el trabajo), puedo aceptar el sacrificio por las mejores imágenes en el exterior.

nope, i'm not using parallax

 

6 hours ago, Brigadier said:

On Windows, the log is stored at %USERPROFILE%\AppData\LocalLow\Squad\Kerbal Space Program\Player.log.  KSP always produces a log file unless there's some catastrophic failure on start.

I would love to post the ksp.log
right now, but I have some crash problems in Kerbal, I think I'll post them another day

[Brigadier]

2 hours ago, arqui_alpaka said:

right now, but I have some crash problems in Kerbal, I think I'll post them another day

That's precisely why I would encourage you to reconsider and post your log.  The diagnosis of its contents may reveal the cause of the problems you're having.  It's more information for those capable of figuring out what's going wrong.  Without the log, many hands are tied and people will offer guesses without any data to back them up.

[arqui_alpaka]

1 hour ago, Brigadier said:

That's precisely why I would encourage you to reconsider and post your log.  The diagnosis of its contents may reveal the cause of the problems you're having.  It's more information for those capable of figuring out what's going wrong.  Without the log, many hands are tied and people will offer guesses without any data to back them up.

yes it is true, but the crash happens for something other than Restock I think
I leave here what I think is the "ksp.log" of the folder "C:\Users\userprofile\AppData\Local\Temp\Squad\Kerbal Space Program\Crashes\Crash_2024-12-04_010042099"
now I look for the thread that is about crashes
https://drive.google.com/drive/folders/1si3SQUxZM7zutCn7vL8DUwXMyHDe3e-n?usp=sharing

[Svm420]

IF you add this MM patch it will fix the clamps in the editor.

 

@PART[launchClamp1]:AFTER[Restock]
{
    @MODULE[ModuleRestockLaunchClamp]
    {
        %instancingEnabled = false
    }
}

Edited December 5, 2024 by Svm420

[Fizzlebop Smith]

7 hours ago, Svm420 said:

IF you add this MM patch it will fix the clamps in the editor.

 

@PART[launchClamp1]
{
    @MODULE[ModuleRestockLaunchClamp]
    {
        %instancingEnabled = false
    }
}

Is this editing the configuration file for the launch clamp.. or new text file named (xx.cfg) sorry I'm not good at this stuff.

[loki130]

23 hours ago, arqui_alpaka said:

nope, i'm not using parallax

 

I would love to post the ksp.log
right now, but I have some crash problems in Kerbal, I think I'll post them another day

Are you using Deferred? I think that messes with how transparency is done in the editor

[Svm420]

3 hours ago, Fizzlebop Smith said:

Is this editing the configuration file for the launch clamp.. or new text file named (xx.cfg) sorry I'm not good at this stuff.

The latter

[arqui_alpaka]

Hace 17 horas, loki130 dijo:

¿Está utilizando el diferido? Creo que eso se mete con cómo se hace la transparencia en el editor

Nop

[hellothere___]

I have an issue that i think is from Restock. When i switch vessels (and sometimes in the SPH too) the inside of intakes and engines become transparent. Also, if i clip a part into an intake, the part of the part that was in the empty space inside the intake disappeared. How do i fix this?

[urturino]

4 hours ago, hellothere___ said:

I have an issue that i think is from Restock. When i switch vessels (and sometimes in the SPH too) the inside of intakes and engines become transparent. Also, if i clip a part into an intake, the part of the part that was in the empty space inside the intake disappeared. How do i fix this?

If you have TURD, it's TURD's fault.

You can reload the craft in the VAB, launch it and return to VAB, Return to VAB and re-launch it. Things like that, but there is not a real solution.

[hellothere___]

2 minutes ago, urturino said:

If you have TURD, it's TURD's fault.

You can reload the craft in the VAB, launch it and return to VAB, Return to VAB and re-launch it. Things like that, but there is not a real solution.

I dont have TURD installed. Or atleast i cant find it in my gamedata. 

[hellothere___]

On 1/1/2025 at 11:02 PM, urturino said:

If you have TURD, it's TURD's fault.

You can reload the craft in the VAB, launch it and return to VAB, Return to VAB and re-launch it. Things like that, but there is not a real solution.

I ended up fixing it, i just had to modify the moduledepthmask or something like that.

Also, reloading it wouldnt work as it happens every time i switch vessels.

Edited January 5 by hellothere___
expanding

[Squirrel Slapper]

Any chance of some sort of collaboration to bring the parts in the fantastic SXT mod up to snuff with the Restock art style?

[Stratickus]

Edit:  Nevermind.. I missed the part where it says "requires Restock Waterfall".. I had SWE installed.

On 8/29/2024 at 5:09 PM, huj said:

I wrote a small patch to fix the bobcat cheetah plumes. To use it just paste it in a new config file somewhere in the gamedata folder, and it requires restock waterfall expansion to work.

Spoiler

@PART[LiquidEngineLV-T91]:FINAL
{
  @MODULE[ModuleWaterfallFX]
  {
    @TEMPLATE[plume]
    {
      @overrideParentTransform = fxTransformPlume
      @position = 0,0.033,0
      @rotation = 90, 0, 0
      @scale = 0.64, 0.64, 0.6925
    }
    @TEMPLATE[generator]
    {
      @overrideParentTransform = vernier_fxTransform
      @position = 0,0.01,0
      @rotation = -90, 0, 0
      @scale = 0.8, 0.8, 0.8
    }
  }
  @MODULE[ModuleB9PartSwitch]
  {
    @SUBTYPE[keroloxCheetah]
    {
      @MODULE
      {
        @DATA
        {
          @TEMPLATE[plume]
          {
            @overrideParentTransform = fxTransformPlume
            @position = 0,-0.09,0
            @rotation = 90, 0, 0
            @scale = 1.94, 1.94, 2
          }
          @TEMPLATE[core]
          {
            @overrideParentTransform = fxTransformPlume
            @position = 0,-0.1,0
            @rotation = 90, 0, 0
            @scale = 1.95, 1.95, 2
          }
          @TEMPLATE[generator]
          {
            @overrideParentTransform = vernier_fxTransform
          }
        }
      }
    }
    @SUBTYPE[hypergolicCheetah]
    {
      @MODULE
      {
        @DATA
        {
          @TEMPLATE[plume]
          {
            @overrideParentTransform = fxTransformPlume
            @position = 0,0.02,0
            @rotation = 90, 0, 0
            @scale = 0.65, 0.65, 0.65
          }
          @TEMPLATE[core]
          {
            @overrideParentTransform = fxTransformPlume
            @position = 0,-0.1,0
            @rotation = 90, 0, 0
            @scale = 0.81, 0.81, 1
          }
          @TEMPLATE[generator]
          {
            @overrideParentTransform = vernier_fxTransform
          }
        }
      }
    }
  }

}

On 8/29/2024 at 6:30 PM, 1FingerSalute said:

Very nice, looks perfect. Thank you.

Is this still working for everyone? I just can't get seem to get it to work.

Cheers,

Edited February 2 by Stratickus
Fixed Problem

[EnderiumSmith]

Hi, since Restock is being worked on again, could we get the heat shields to have a support truss extend to half the diameter on the top side? Right now connecting a 1.25m heat shield to a probe will result in the probe just floating above the heat shield.

[Stephen Locksley]

Since SXTContinued alters the M-2x2 Structural panel to have 8 extra attachment nodes (4 on top face, 4 on bottom face), will it conflict with Restock because it does the same thing as well?

[Spacefox1]

Does anyone know if there's any way to get IVAs for restock plus capsules? its just black inside.

[Svm420]

35 minutes ago, Spacefox1 said:

Does anyone know if there's any way to get IVAs for restock plus capsules? its just black inside.

Yes I see 3 ways:

1 Continue to wait for some person in the community to fill the need.

2. Find Someone specific in the community to fill the need.

3. Fill the need yourself.

Likely outcomes as I see it.

1. Outcome uncertain. You can spend your whole life waiting for random chance to serve you. Good luck.

2. Outcome uncertain. I am not sure who or how many people are left in the community who enjoy making IVAs and have time to, but this has better chances if you can find a willing party.

3. Most certain outcome. You can be the change you want to see. Feel like the community could use more people creating high quality IVAs? Fill that need. That how everyone gets started and while it many seem insurmountable the longest journeys start with desire and a first step. If you go this route I am sure you find  people who will support you in accomplishing your goals. You need only ask for help. 

Edited yesterday at 02:24 AM by Svm420

[JonnyOThan]

13 hours ago, Spacefox1 said:

Does anyone know if there's any way to get IVAs for restock plus capsules? its just black inside.

I believe these are the ones that overlap with Making History DLC, right?  So you could buy the DLC.