[1.12.1] JNSQ [0.10.0] [23 Sept 2021]

Ariel Kerman · September 28, 2024

15 hours ago, user_of_the_ksp said:

I installed the configs but where do i paste them or install them to because When i paste it into game data and start the game it doesnt work and there are still icebergs at the equator

https://imgur.com/a/e1mMNf7

What configs do you mean specifically?

InfectedMushroom9 · November 20, 2024

On 9/18/2022 at 5:22 PM, thunder175 said:

Posting this here for general comment, suggestions, and anyone looking for something similar in the future. I'm completely enthralled with KSP again and am using JNSQ as my base. I'm getting excellent results running the current version of Parallax and even with Sigma Dimensions rescaling to 6.4x. I'm also using PSA's Toast mod for tilting the entire system to Earth-like values. Because of that I've relocated the KSC to a nice little piece of real estate at 28.58N latitude. I upscaled the system to 6.4x using SigmaDimensions. I only went to 6.4x since I simply cannot play without BDB, and their BlueSmurff patch only is effective to 6.4x.

My KSC relocation MM patch.

Reveal hidden contents

@Kopernicus:AFTER[JNSQ]
{
@Body[Kerbin]
{
@PQS
{
@Mods
{
@MapDecalTangent[KSC]
{
@absoluteOffset = 300            // elevation ASL of map decal
@angle = 0             // rotation of map decal
@position = -0.4404504557,0.47869185795,-0.759511344196 // position vector of map decal, with X,Y,Z coordinates as follows:
// X = cos(latitude)*cos(longitude)
// Y = sin(latitude)
// Z = cos(latitude)*sin(longitude)
@radius = 8200 // radius of map decal
}
}
}
@SpaceCenter
{
@latitude = 28.58                                       // latitude of KSC center
@longitude = -120.066 // longitude of KSC center
@repositionRadiusOffset = 293 // elevation ASL of KSC
@reorientFinalAngle = 30.11 // rotation of KSC, should be equal to 270-longitude
}
}
}

My Sigma Dimensions patch to get everything scaled up to 6.4x. Resize and rescale at 2.4 is due to JNSQ already being at 2.7x stock scale.

Reveal hidden contents

SigmaDimensions
{
   // Base Settings

   Resize = 2.4
   Rescale = 2.4
   Atmosphere = 1.2
   dayLengthMultiplier = 2


   // Advanced Settings

   landscape = 0.64
   geeASLmultiplier = 1

   resizeScatter = 1
   resizeBuildings = 0
   groundTiling = 1

   CustomSoISize = 0
   CustomRingSize = 0

   atmoASL = 1
   tempASL = 1
   atmoTopLayer = 1.3334
   atmoVisualEffect = 1.2

   lightRange = 1

   scanAltitude = 1
}

@EVE_CLOUDS:AFTER[SigDim2]:NEEDS[SigDim]
{
   @OBJECT,*
   {
       @altitude *= 0.62
   }
}

RealAntennas MM patch to put ground stations at various points around Kerbin. I used KK base locations as the basis, but KK is not required.

Reveal hidden contents

// Insert stock ground stations into Kopernicus structure
@Kopernicus:FOR[RealAntennas]:NEEDS[Kopernicus,JNSQ]
{
@Body[Kerbin]
{
@PQS
{
@Mods
{
// DSN Tracking Stations
City2
{
name = DSNTrackingStation
objectName = Kerbal Space Center
isKSC = True
lat = 28.6 // -0.037779
lon = -120.11 // -91.8112
alt = 61.5
enabled = True
}
City2
{
name = DSNTrackingStation
objectName = Woomerang Station
isKSC = False
lat = 45.292469168494982
lon = 136.11264416820407
alt = 1499
enabled = True
}
City2
{
name = DSNTrackingStation
objectName = Darude Station
isKSC = False
lat = -6.504763656266169
lon = -144.02834704934483
alt = 317
enabled = True
}
City2
{
name = DSNTrackingStation
objectName = Yeager Station
isKSC = False
lat = 6.0021000000000004
lon = 26.842099999999999
alt = 61.5
enabled = True
}

// VHF/UHF Only Tracking Stations
City2
{
name = TrackingStation
objectName = McAuliffe Station
isKSC = False
lat = 10.101246432181441
lon = -67.222886902004106
alt = 20
enabled = True
}
City2
{
name = TrackingStation
objectName = Tereshkova Station
isKSC = False
lat = 9.7752999999999997
lon = 103.99469999999999
alt = 20
enabled = True
}
City2
{
name = TrackingStation
objectName = N32A
isKSC = False
lat = 32.753995571086115
lon = 30.11383875911087
alt = 20
enabled = True
}
City2
{
name = TrackingStation
objectName = N46A
isKSC = False
lat = 46.143966380212746
lon = -67.059062463918721
alt = 20
enabled = True
}
City2
{
name = TrackingStation
objectName = S37A
isKSC = False
lat = -37.7425
lon = 13.680199999999999
alt = 20
enabled = True
}
City2
{
name = TrackingStation
objectName = S28A
isKSC = False
lat = -28.010610493256991
lon = 134.03003179590334
alt = 20
enabled = True
}
City2
{
name = TrackingStation
objectName = S28A
isKSC = False
lat = -24.646599999999999
lon = -75.930199999999999
alt = 20
enabled = True
}
City2
{
name = TrackingStation
objectName = S00A
isKSC = False
lat = -0.13780027830397137
lon = 161.95664905795817
alt = 20
enabled = True
}

// Tracking Station Antenna Information
@City2[*TrackingStation],*
{
!Antenna,* {} // Delete and rebuild all antennas
%commnetStation = False
RACommNetStation = True
Antenna
{
referenceGain = 1 // Everyone gets a weak VHF
TxPower = 40 // 10W
TechLevel = 0
RFBand = VHF
AMWTemp = 1340.8 // 7.5dB, https://archive.org/details/nasa_techdoc_19630042971/page/n21
ModulationBits = 1 // BPSK only
}
Antenna
{
referenceGain = 3 // Everyone gets a weak UHF
TxPower = 40 // 10W
TechLevel = 3
RFBand = UHF
AMWTemp = 1340.8
ModulationBits = 1 // BPSK only
}
}
@City2[*TrackingStation],*
{
LOD
{
Value
{
visibleRange = 30000
keepActive = False
model = BUILTIN/Dish
scale = 0.1, 0.1, 0.1
delete = False
}
}
}
@City2[DSNTrackingStation],*
{
@Antenna:HAS[#RFBand[VHF]],*
{
@referenceGain = 20 // DSN gets some array
%referenceFrequency = 150
@TxPower = 50
}
@Antenna:HAS[#RFBand[UHF]],*
{
@referenceGain = 20 // DSN gets some array
%referenceFrequency = 430
@TxPower = 50
}
Antenna
{
referenceGain = 49 // Original S-Band 18m, -3dBi vs 26m (module 102)
referenceFrequency = 2250
TxPower = 63 // 2KW
TechLevel = 4
RFBand = S
AMWTemp = 290
ModulationBits = 1

UPGRADE
{
TechLevel = 5 // "Advanced Comms" 1967-1971 tech node (1967-1970)
                           referenceGain =   60.5 // 64m Antenna: +8dB? 1967
AMWTemp = 80 // Noise reduction 1968, block coding 1969
}
UPGRADE
{
TechLevel = 6 // "Deep Space Comms" 1972-1975 tech node (1971-1974)
referenceGain = 62.5 // Antenna improvements 1971-1972, Convolutional coding ~1973
}
UPGRADE
{
TechLevel = 7 // "High Data Rate Comms" 1976-1980 tech node
AMWTemp = 40 // X-Band introduction ~1975, concatenated coding
ModulationBits = 2 // MW noise reduction ~1980
}
UPGRADE
{
TechLevel = 8 // "Massive Scale Comms" 1986-1997 tech node
referenceGain = 63.6 // 70m antennas +.8dBi 1988
TxPower = 73 // 20KW
}
UPGRADE
{
TechLevel = 9 // "Efficient Comms" 1998-2008 tech node
AMWTemp = 17.6 // Super-cooled maser & feed 1995, Ka-band 2004
}
}
Antenna
{
referenceGain = 73.5 // X-Band 64m
referenceFrequency = 8450
TxPower = 70 // 10KW
TechLevel = 5
RFBand = X
AMWTemp = 40
ModulationBits = 2

UPGRADE
{
TechLevel = 8
referenceGain = 74.3
TxPower = 73
}
UPGRADE
{
TechLevel = 9
AMWTemp = 12.8
}
}
Antenna
{
referenceGain = 79 // Ka-Band 34m
referenceFrequency = 32000
TxPower = 54.8
TechLevel = 7
RFBand = Ka
AMWTemp = 20
ModulationBits = 2
}
}
}
}
}
}

Thank you!!
Is it possible to do a pull request for your RealAntennas patch? It would've saved me at least half an hour of googling if this was included be default.

RedAl1en1 · January 10

i tried installing it through ckan, it says there was an exception in the loading process

obnox twin · January 28

On 1/11/2025 at 9:08 AM, RedAl1en1 said:

i tried installing it through ckan, it says there was an exception in the loading process

Is this Kopernicus exception? and do you have parallax installed with the JNSQ patches. If so its most likely the JNSQ parallax patch that broke

RedAl1en1 · January 28

idk imma try it after i finish my diagnostics (im homeschooled)

oh wait i have eve and scatters from ckan

flart · February 7

On 7/17/2024 at 7:48 AM, Ariel Kerman said:

If youre downloading all from CKAN, then thats the problem.
I suggest you the following steps on a clean install:
- Install JNSQ from CKAN
- Install TUFX from CKAN
Check the game works fine and then close it.
- Install EVE Volumetrics with the bundled version of Scatter
- Install Parallax 2.0.7 (latest) version
- Install JNSQ Volumetrics from here
- Install the JNSQ Parallax Scatters configs linked in the main post, or from Github
Check again the game is working fine, the volumetric clouds and Parallax should be there.
- Now install Deferred Rendering. Important: check the compatibility mod list in the Github page in order to install the correct fork for other mods, including EVE Volumetric's FIX files.

DO NOT install EVE or Scatter from CKAN

Does configs for CKAN Scatterer exists?

CKAN JNSQ + CKAN Scatterer 0.08 + CKAN EVERedux + CKAN Parallax ?

(no Volumetrics cloud, no TUFX)

SkyFall2489 · Sunday at 05:40 PM

Just wondering, does JNSQ Kerbin have any rivers like Stock Kerbin does? I don't see any from the tracking station but they might be too small to see from there.

OhioBob · Sunday at 06:45 PM

1 hour ago, SkyFall2489 said:

Just wondering, does JNSQ Kerbin have any rivers like Stock Kerbin does? I don't see any from the tracking station but they might be too small to see from there.

I don't recall any.

Infinite Aerospace · Monday at 12:50 PM

On 2/7/2025 at 6:45 PM, flart said:

Does configs for CKAN Scatterer exists?

CKAN JNSQ + CKAN Scatterer 0.08 + CKAN EVERedux + CKAN Parallax ?

(no Volumetrics cloud, no TUFX)

There is a stand-alone JNSQ Scatterer patch, that was made by Coldrifting I believe. There's a couple of JNSQ Parallax configs but I don't think they're on CKAN.

MOPC · Monday at 02:50 PM

20 hours ago, OhioBob said:

I don't recall any.

Is it even possible to make realistic rivers at the scale this big without massively increasing biome map pixel density?

SkyFall2489 · Monday at 04:12 PM

1 hour ago, MOPC said:

Is it even possible to make realistic rivers at the scale this big without massively increasing biome map pixel density?

Maybe it would be possible using Kerbal Konstructs to shape the terrain?
if this is feasible, could I request it as a feature? Flying down stock Kerbin's rivers at mach 2 is really fun.

flart · Monday at 05:37 PM

4 hours ago, Infinite Aerospace said:

There is a stand-alone JNSQ Scatterer patch, that was made by Coldrifting I believe. There's a couple of JNSQ Parallax configs but I don't think they're on CKAN.

Thanks, so there is

https://github.com/coldrifting/JNSQ_ScattererPatch
https://github.com/coldrifting/JNSQ_ParallaxScatters

Any chance someone knows if it will work for

CKAN JNSQ + CKAN Scatterer 0.08 + CKAN EVERedux + CKAN Parallax? (No volumetric clouds, no TUFX)

I'm not sure how it should look, so it's difficult to know if everything is working as expected.

@Coldrifting Have you made JNSQ_ScattererPatch for CKAN Scatterer 0.08 or for the latest Volumetric cloud one ?

Infinite Aerospace · Monday at 08:09 PM

2 hours ago, flart said:

Thanks, so there is

https://github.com/coldrifting/JNSQ_ScattererPatch
https://github.com/coldrifting/JNSQ_ParallaxScatters

Any chance someone knows if it will work for

CKAN JNSQ + CKAN Scatterer 0.08 + CKAN EVERedux + CKAN Parallax? (No volumetric clouds, no TUFX)

I'm not sure how it should look, so it's difficult to know if everything is working as expected.

@Coldrifting Have you made JNSQ_ScattererPatch for CKAN Scatterer 0.08 or for the latest Volumetric cloud one ?

Last time I checked, that all worked fine and neither KSP or JNSQ have been updated since, so should be fine.

Krazy1 · Monday at 11:18 PM

I think the ColdDrifting Parallax config caused some issues with the BG surface features, so I removed it. Needed those to work for contracts. Read back a couple pages and check the issues logged for the configs.

Edited Monday at 11:19 PM by Krazy1

flart · Tuesday at 04:50 PM

17 hours ago, Krazy1 said:

I think the ColdDrifting Parallax config caused some issues with the BG surface features, so I removed it. Needed those to work for contracts. Read back a couple pages and check the issues logged for the configs.

this is it

On 4/7/2024 at 10:30 AM, Krazy1 said:

I thought I already posted this....
There are no Ridgelines on Gilly. I landed at least 5 places and used the surface feature finder and there are none there. They work on the Mun, Minmus and Moho but not Gilly.

https://github.com/Galileo88/JNSQ/issues/57

I also had to remove Parallax and the config linked above because it eliminates all BG surface features, not just on Gilly.

https://github.com/coldrifting/JNSQ_ParallaxScatters/issues/2

[1.12.1] JNSQ [0.10.0] [23 Sept 2021]

Recommended Posts

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Join the conversation