[1.12.x] Kerbal Alarm Clock v3.13.0.0 (April 10)

[Serenity]

  On 12/9/2019 at 1:49 AM, Brigadier said:

I would suspect they're in the persistence.sfs file in your <Your KSP install>/saves/<game> directory.  Search for "alarm".

Expand  

Hah, you are right, its under Scenario->KerbalAlarmClockScenario .Thanks!

[TanDeeJay]

  On 12/8/2019 at 1:16 PM, DStaal said:

In theory that's probably fine.  In practice, what happens is people come and complain on the forum that the calculation is wrong.   

Expand  

Oh yeah, never thought of that side of the coin. Thats a good point. Build a feature that meets the needs of some players and all the others will expect it to work differently.

[TanDeeJay]

  On 12/8/2019 at 11:16 AM, HansAcker said:

There's another mod by TriggerAu, Alternate Resource Panel (it says 1.4 in the title but works fine on KSP 1.8.1) which does the calculation and displays estimated time until full/empty. Granted, a button to set a KAC alarm from the panel would sure be nice, but as other have said, there's no guarantee that the projection holds up through timewarp and rails and resources might fill up or run out at a much different time.

Expand  

Thanks I'll take a look. That might give me a rough enough estimate to feed into KAC for my purposes. I'm not after an accurate projection.

[putnamto]

Is there a way to set an alarm for a specific number of days from now? 

Like I have an asteroid entering kerbin soi in 87 days and would like an alarm to go off then

[Friznit]

  On 1/6/2020 at 9:14 PM, putnamto said:

Is there a way to set an alarm for a specific number of days from now? 

Like I have an asteroid entering kerbin soi in 87 days and would like an alarm to go off then

Expand  

You can set a raw time alarm (first alarm clock icon)

[putnamto]

  On 1/6/2020 at 10:37 PM, Friznit said:

You can set a raw time alarm (first alarm clock icon)

Expand  

yeah, i checked their, it only has two options, set it off at this time and date, or set it off this many seconds from now, their is no option for x amount of kerbin days from now. or atleast not that im aware of

 

[litemaster]

Maybe the dialog cut of in your case?
There should be 5 input boxes in the center for the popup (years, days, hours, minutes, seconds) when "Time Interval" is selected. It sounds like you only see "UT (raw seconds)".

Source:https://triggerau.github.io/KerbalAlarmClock/manual.html

[Lisias]

There's a way to use MET (Mission Elapsed Time) as Alarm source?

[Neevenzz]

Having an issue with the GUI not scaling to show me the number of alarms I would like to see. No matter the number, it only shows me a single alarm with scroll bar. Not sure if there's something I'm missing or not. Any help would be appreciated! Thank you!

[Brigadier]

  On 2/4/2020 at 1:21 AM, Neevenzz said:

Having an issue with the GUI not scaling to show me the number of alarms I would like to see. No matter the number, it only shows me a single alarm with scroll bar. Not sure if there's something I'm missing or not. Any help would be appreciated! Thank you!

Expand  

Just a first guess, but have you inadvertently limited the alarm to those on the current vessel only?

[Neevenzz]

  On 2/4/2020 at 7:58 AM, Brigadier said:

Just a first guess, but have you inadvertently limited the alarm to those on the current vessel only?

Expand  

Sorry to just get back to you. That wasn't the issue. I only had 3-4 alarms set, then once I added about 10, the list decided to stay expanded. Really not sure what the issue was, but it's fixed now. Thanks for the suggestion.

[Daniel Ribeiro]

Is there any plans to upgrade this mod for the KSP 1.9.0 version?

[azander]

As is, it works in 1.9 for me.

[nubeees]

It's been a little buggy for me in 1.9, but that could just be the amount of mods I have on  

[Matt_In_Oz]

Hey all. Apologies if this has been dealt with previously... I'm using KAC to schedule a transfer window Kerbin - Duna... and after I create the alarm and go back to it It shows the message "No TWP Phase and Eject Angle found in notes"... and I can't seem to find a way to enter any such notes. What am I doing wrong with this?

[leatherneck6017]

  On 3/7/2020 at 1:11 PM, Matt_In_Oz said:

Hey all. Apologies if this has been dealt with previously... I'm using KAC to schedule a transfer window Kerbin - Duna... and after I create the alarm and go back to it It shows the message "No TWP Phase and Eject Angle found in notes"... and I can't seem to find a way to enter any such notes. What am I doing wrong with this?

Expand  

Are you manually adding the alarm, or is another mod adding it?

[Matt_In_Oz]

  On 3/7/2020 at 3:51 PM, leatherneck6017 said:

Are you manually adding the alarm, or is another mod adding it?

Expand  

Manually adding it.

(And as an aside... I just landed on Duna for the first time. Yay! )

[dtoxic]

Nullref in 1.9.1, maybe of importance before a recompile

  Reveal hidden contents

[LOG 17:05:13.407] 3/23/2020 5:05:13 PM,KerbalAlarmClock,Scene Change from 'TRACKSTATION' to 'FLIGHT'
[LOG 17:05:13.407] 3/23/2020 5:05:13 PM,KerbalAlarmClock,Active Vessel unreadable - resetting inqueue flag
[EXC 17:05:13.431] NullReferenceException: Object reference not set to an instance of an object
    KerbalAlarmClock.KerbalAlarmClock.UpdateDetails () (at <e69a81c5ec3342daafbc7cbbab863965>:0)
    KerbalAlarmClock.KerbalAlarmClock.RepeatingWorker () (at <e69a81c5ec3342daafbc7cbbab863965>:0)
    KSPPluginFramework.MonoBehaviourExtended.RepeatingWorkerWrapper () (at <e69a81c5ec3342daafbc7cbbab863965>:0)
    UnityEngine.DebugLogHandler:LogException(Exception, Object)
    ModuleManager.UnityLogHandle.InterceptLogHandler:LogException(Exception, Object)
    UnityEngine.Debug:CallOverridenDebugHandler(Exception, Object)
[LOG 17:05:13.444] 3/23/2020 5:05:13 PM,KerbalAlarmClock,Removing DrawGUI from PostRender Queue

 

[ca@carsonoid.net]

I've recompiled for 1.9.1 and included a fix for the miscalculation of the AN/DN markers thanks to another Github user's existing PR for the upstream repo.

The zip is available here: https://github.com/carsonoid/KerbalAlarmClock/releases/tag/v3.13.0

Edited April 4, 2020 by ca@carsonoid.net

[TriggerAu]

New version recompiled against 1.9.x 

Download from GitHub or Download from Curse or Download from SpaceDock

• Recompiled for 1.9.1
• Fix for input locking chekcing issue on Linux - thanks Taniwha
• Fix for AN/DN timing (Issue #239) - Thanks Doxen
• Update API Wrapper for actions (Issue #233)
   

 

[Drew Kerman]

@TriggerAu is it possible for you to enable the title bar of the alarm clock window to be dragged up off the screen in 1.9.1? You added this for me a while back and it's not working anymore in the latest version

Edited May 7, 2020 by Drew Kerman

[Jognt]

CKAN says v3.13 isn't 1.8.1 compatible. Intentional or is it (probably?) safe to use? (I'm on 1.8.1 due to Kopernicus)

[TriggerAu]

  On 5/7/2020 at 8:51 PM, Jognt said:

CKAN says v3.13 isn't 1.8.1 compatible. Intentional or is it (probably?) safe to use? (I'm on 1.8.1 due to Kopernicus)

Expand  

v3.12 is the 1.8.1 compatible release my friend. If itsnot coming up in CKAN you can try form here: https://github.com/TriggerAu/KerbalAlarmClock/releases/tag/v3.12.0.0

[Jognt]

  On 5/8/2020 at 9:44 AM, TriggerAu said:

v3.12 is the 1.8.1 compatible release my friend. If itsnot coming up in CKAN you can try form here: https://github.com/TriggerAu/KerbalAlarmClock/releases/tag/v3.12.0.0

Expand  

Much appreciated.

Was CKAN supposed to be aware of 1.8.1 compatibility or was this just an oversight? Wondering because this is the third time recently that CKAN was unaware of a compatible update.

Edited May 8, 2020 by Jognt

[Nightside]

  On 5/8/2020 at 5:21 PM, Jognt said:

Much appreciated.

I'm about to comment in the CKAN thread about noticing mods not being flagged as compatible and many mods not showing in CKAN anymore since yesterday. Was CKAN supposed to be aware of 1.8.1 compatibility or was this just an oversight?

Expand  

Sounds like a question for the CKAN thread?