Enceos Posted May 17, 2016 Share Posted May 17, 2016 @nightingale I also ran into a critical issue with docking ports, where they introduce a huge phantom torque after docking. Left KSP for quite a while because I couldn't pinpoint the problematic mod, not being able to dock is not fun. Decided to run the game again and devoted 4 hours to juggling and testing. Turns out all versions of CC for KSP 1.1.2 have this problem (tested with only MM and CC present). Strange that more people don't report this. I can genereate plenty of logs, pics and vids on request. Quote Link to comment Share on other sites More sharing options...
linuxgurugamer Posted May 18, 2016 Share Posted May 18, 2016 @nightingale I'm looking into some issues with my rover contracts. This is the first time I'm looking at it since the 1.1 release. In 1.0.5, they worked fine, but in 1.1.2, I see the following error: ContractConfigurator.Behaviour.WaypointGeneratorFactory: CONTRACT_TYPE 'RoverExplore', BEHAVIOUR '@/a1' of type 'WaypointGenerator: A validation error occured while loading the key 'maxDistance' with value '3000'. (Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/UnityEngineDebugBindings.gen.cpp Line: 64) ArgumentException: Must be greater than 3500 at ContractConfigurator.Validation.GT[Double] (Double val, Double referenceValue) [0x00000] in <filename unknown>:0 at ContractConfigurator.Behaviour.WaypointGenerator+<>c__DisplayClass8_0.<Create>b__25 (Double x) [0x00000] in <filename unknown>:0 at ContractConfigurator.ConfigNodeUtil.ParseValue[Double] (.ConfigNode configNode, System.String key, System.Action`1 setter, IContractConfiguratorFactory obj, Double defaultValue, System.Func`2 validation) [0x00000] in <filename unknown>:0 UnityEngine.Debug:Internal_LogException(Exception, Object) UnityEngine.Debug:LogException(Exception) ContractConfigurator.LoggingUtil:LogException(Exception) ContractConfigurator.ConfigNodeUtil:ParseValue(ConfigNode, String, Action`1, IContractConfiguratorFactory, Double, Func`2) ContractConfigurator.ConfigNodeUtil:ParseValue(ConfigNode, String, Action`1, IContractConfiguratorFactory, Func`2) ContractConfigurator.DeferredLoadUtil:ExecuteLoad(DeferredLoadObject`1) System.Reflection.MonoMethod:InternalInvoke(Object, Object[], Exception&) System.Reflection.MonoMethod:Invoke(Object, BindingFlags, Binder, Object[], CultureInfo) System.Reflection.MethodBase:Invoke(Object, Object[]) ContractConfigurator.<UpdateNonDeterministicValuesIterator>d__26:MoveNext() System.Linq.<CreateConcatIterator>c__Iterator1`1:MoveNext() ContractConfigurator.<ContractGenerator>d__26:MoveNext() ContractConfigurator.<ContractGenerator>d__25:MoveNext() ContractConfigurator.ContractPreLoader:Update() When I look at the CC screen, it says it successfully loaded 2 out of 2 contracts This happened after a first mission, didn't see it again. Quote Link to comment Share on other sites More sharing options...
gamerscircle Posted May 18, 2016 Share Posted May 18, 2016 I am attempting to do something that is most likely, the wrong way to do it or I just shouldn't do it. Anyway, I got this error and was curious if someone can help me attempt to fix it? Exception occured while loading contract parameter 'SCANsatCoverage' in contract 'unknown': System.ArgumentException: Missing required value 'targetBody'. at ContractConfigurator.ConfigNodeUtil.ParseValue[CelestialBody] (.ConfigNode configNode, System.String key, Boolean allowExpression) [0x00000] in <filename unknown>:0 at ContractConfigurator.SCANsatCoverage.OnParameterLoad (.ConfigNode node) [0x00000] in <filename unknown>:0 at ContractConfigurator.Parameters.ContractConfiguratorParameter.OnLoad (.ConfigNode node) [0x00000] in <filename unknown>:0 What am I doing? I am attempting to take a modded career and use it in SSRSS [Stock Sized RSS] - I have all the same mods, but yes - the planets are different, all flights are gone, just attempting to preserve the contract progress. Thanks Quote Link to comment Share on other sites More sharing options...
linuxgurugamer Posted May 18, 2016 Share Posted May 18, 2016 (edited) Another issue I'm having: The RoverDeploy contract, which is loaded correctly, never gets presented. This is a career game, everything is unlocked (via alt-F12), the only requirement is Antenna & Wheel unlocked. I don't see anything wrong. I used the StockNoContracts to disable all stock contracts any ideas? Edited May 18, 2016 by linuxgurugamer Quote Link to comment Share on other sites More sharing options...
nightingale Posted May 18, 2016 Author Share Posted May 18, 2016 6 hours ago, Enceos said: @nightingale I also ran into a critical issue with docking ports, where they introduce a huge phantom torque after docking. Left KSP for quite a while because I couldn't pinpoint the problematic mod, not being able to dock is not fun. Decided to run the game again and devoted 4 hours to juggling and testing. Turns out all versions of CC for KSP 1.1.2 have this problem (tested with only MM and CC present). Strange that more people don't report this. I can genereate plenty of logs, pics and vids on request. Sure, can you log a GitHub issue and link the logs/pics there? 2 hours ago, linuxgurugamer said: @nightingale I'm looking into some issues with my rover contracts. This is the first time I'm looking at it since the 1.1 release. In 1.0.5, they worked fine, but in 1.1.2, I see the following error: ContractConfigurator.Behaviour.WaypointGeneratorFactory: CONTRACT_TYPE 'RoverExplore', BEHAVIOUR '@/a1' of type 'WaypointGenerator: A validation error occured while loading the key 'maxDistance' with value '3000'. (Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/UnityEngineDebugBindings.gen.cpp Line: 64) ArgumentException: Must be greater than 3500 at ContractConfigurator.Validation.GT[Double] (Double val, Double referenceValue) [0x00000] in <filename unknown>:0 at ContractConfigurator.Behaviour.WaypointGenerator+<>c__DisplayClass8_0.<Create>b__25 (Double x) [0x00000] in <filename unknown>:0 at ContractConfigurator.ConfigNodeUtil.ParseValue[Double] (.ConfigNode configNode, System.String key, System.Action`1 setter, IContractConfiguratorFactory obj, Double defaultValue, System.Func`2 validation) [0x00000] in <filename unknown>:0 UnityEngine.Debug:Internal_LogException(Exception, Object) UnityEngine.Debug:LogException(Exception) ContractConfigurator.LoggingUtil:LogException(Exception) ContractConfigurator.ConfigNodeUtil:ParseValue(ConfigNode, String, Action`1, IContractConfiguratorFactory, Double, Func`2) ContractConfigurator.ConfigNodeUtil:ParseValue(ConfigNode, String, Action`1, IContractConfiguratorFactory, Func`2) ContractConfigurator.DeferredLoadUtil:ExecuteLoad(DeferredLoadObject`1) System.Reflection.MonoMethod:InternalInvoke(Object, Object[], Exception&) System.Reflection.MonoMethod:Invoke(Object, BindingFlags, Binder, Object[], CultureInfo) System.Reflection.MethodBase:Invoke(Object, Object[]) ContractConfigurator.<UpdateNonDeterministicValuesIterator>d__26:MoveNext() System.Linq.<CreateConcatIterator>c__Iterator1`1:MoveNext() ContractConfigurator.<ContractGenerator>d__26:MoveNext() ContractConfigurator.<ContractGenerator>d__25:MoveNext() ContractConfigurator.ContractPreLoader:Update() When I look at the CC screen, it says it successfully loaded 2 out of 2 contracts This happened after a first mission, didn't see it again. I vaguely remember making some changes that affected the validations here. Do you mind raising a GitHub issue (and ideally including a partial snippet of the contract config or link if it's in GitHub). 1 hour ago, gamerscircle said: I am attempting to do something that is most likely, the wrong way to do it or I just shouldn't do it. Anyway, I got this error and was curious if someone can help me attempt to fix it? Exception occured while loading contract parameter 'SCANsatCoverage' in contract 'unknown': System.ArgumentException: Missing required value 'targetBody'. at ContractConfigurator.ConfigNodeUtil.ParseValue[CelestialBody] (.ConfigNode configNode, System.String key, Boolean allowExpression) [0x00000] in <filename unknown>:0 at ContractConfigurator.SCANsatCoverage.OnParameterLoad (.ConfigNode node) [0x00000] in <filename unknown>:0 at ContractConfigurator.Parameters.ContractConfiguratorParameter.OnLoad (.ConfigNode node) [0x00000] in <filename unknown>:0 What am I doing? I am attempting to take a modded career and use it in SSRSS [Stock Sized RSS] - I have all the same mods, but yes - the planets are different, all flights are gone, just attempting to preserve the contract progress. Thanks In this case the change from Kerbin to RSS is likely the cause. I'd go in and find all the SCANsatCoverage parameters in completed contracts in the save file and just remove them entirely. 1 hour ago, linuxgurugamer said: Another issue I'm having: The RoverDeploy contract, which is loaded correctly, never gets presented. This is a career game, everything is unlocked (via alt-F12), the only requirement is Antenna & Wheel unlocked. I don't see anything wrong. I used the StockNoContracts to disable all stock contracts any ideas? Could be related to #510. Turn debug logging on for Contract Configurator and you should see attempts to generate contracts and why they failed (make sure to do the clear contracts debug to give it a change to generate a couple times). Also, disabling all stock contracts can cause the contract generation system to give up entirely if it doesn't have any contracts to generate at all. Quote Link to comment Share on other sites More sharing options...
gamerscircle Posted May 18, 2016 Share Posted May 18, 2016 Quote In this case the change from Kerbin to RSS is likely the cause. I'd go in and find all the SCANsatCoverage parameters in completed contracts in the save file and just remove them entirely. Bare with me on this, I am assuming the persistent file? Quote Link to comment Share on other sites More sharing options...
tomf Posted May 18, 2016 Share Posted May 18, 2016 (edited) Hi, I just got an error from Contract configurator Exception occured while saving ScenarioModule 'ContractVesselTracker': System.NullReferenceException: Object reference not set to an instance of an object at ContractConfigurator.Extensions+<>c__DisplayClass5_1.<GetHashes>b__1 (.ProtoPartSnapshot childPart) [0x00000] in <filename unknown>:0 at System.Linq.Enumerable+<CreateWhereIterator>c__Iterator1D`1[ProtoPartSnapshot].MoveNext () [0x00000] in <filename unknown>:0 at System.Linq.Enumerable.First[ProtoPartSnapshot] (IEnumerable`1 source, System.Func`2 predicate, Fallback fallback) [0x00000] in <filename unknown>:0 at System.Linq.Enumerable.FirstOrDefault[ProtoPartSnapshot] (IEnumerable`1 source) [0x00000] in <filename unknown>:0 at ContractConfigurator.Extensions+<GetHashes>d__5.MoveNext () [0x00000] in <filename unknown>:0 at System.Linq.Enumerable.Contains[UInt32] (IEnumerable`1 source, UInt32 value, IEqualityComparer`1 comparer) [0x00000] in <filename unknown>:0 at System.Linq.Enumerable.Contains[UInt32] (IEnumerable`1 source, UInt32 value) [0x00000] in <filename unknown>:0 at ContractConfigurator.ContractVesselTracker+<>c__DisplayClass14_0.<OnSave>b__1 (.Vessel v) [0x00000] in <filename unknown>:0 at System.Collections.Generic.List`1[Vessel].GetIndex (Int32 startIndex, Int32 count, System.Predicate`1 match) [0x00000] in <filename unknown>:0 at System.Collections.Generic.List`1[Vessel].Find (System.Predicate`1 match) [0x00000] in <filename unknown>:0 at ContractConfigurator.ContractVesselTracker.OnSave (.ConfigNode node) [0x00000] in <filename unknown>:0 It was after hitting recover on a submarine contract that I think came from tourism plus. I hit ignore and the contract has been completed and I haven't noticed any ill effects yet Edited May 18, 2016 by tomf Quote Link to comment Share on other sites More sharing options...
linuxgurugamer Posted May 18, 2016 Share Posted May 18, 2016 (edited) 6 hours ago, nightingale said: I vaguely remember making some changes that affected the validations here. Do you mind raising a GitHub issue (and ideally including a partial snippet of the contract config or link if it's in GitHub). Done 6 hours ago, nightingale said: Could be related to #510. Turn debug logging on for Contract Configurator and you should see attempts to generate contracts and why they failed (make sure to do the clear contracts debug to give it a change to generate a couple times). Also, disabling all stock contracts can cause the contract generation system to give up entirely if it doesn't have any contracts to generate at all. I did that, and boy did it slow down :-) I enabled the partTest, and got 20-30 part test contracts, so disabled that and enabled the GrandTour, then I got nothing, the CC messages are below. [VERBOSE] ContractConfigurator.ContractPreLoader: Not going to generate a contract... [VERBOSE] ContractConfigurator.ConfiguredContract: MeetRequirements() [VERBOSE] ContractConfigurator.ContractPreLoader: Request to generate contract of prestige level Exceptional Details: I first did 2 or three missions to get past the initial contracts, including getting to space, orbiting, data, etc. I didn't see any contracts, so I then used the cheat to enable all parts. Still nothing, I turned on the debug and got the above messages. Sometime after doing all the testing, the 4 contracts I had completed disappeared from the archives. In order to get some contracts from stock, I enabled the WorldFirst contracts, so I got those, but never any from CC Edit: I went back and looked at the file, and I did see other request to generate Trivial and Significant contracts. here is a link to the log file: https://www.dropbox.com/s/ip6ovangy2j6htv/rovertest_output_log.txt?dl=0 Edited May 18, 2016 by linuxgurugamer Quote Link to comment Share on other sites More sharing options...
AlphaAsh Posted May 18, 2016 Share Posted May 18, 2016 1 minute ago, linuxgurugamer said: [VERBOSE] ContractConfigurator.ContractPreLoader: Request to generate contract of prestige level Exceptional Is it possible you just don't have enough rep yet to get exceptional contracts? Quote Link to comment Share on other sites More sharing options...
linuxgurugamer Posted May 18, 2016 Share Posted May 18, 2016 2 minutes ago, AlphaAsh said: Is it possible you just don't have enough rep yet to get exceptional contracts? Ummm, rep = 1000. This was a test, so I set it to very easy. Also, the RoverDeploy contracts don't require exceptional, they will do all Quote Link to comment Share on other sites More sharing options...
linuxgurugamer Posted May 18, 2016 Share Posted May 18, 2016 14 minutes ago, AlphaAsh said: Is it possible you just don't have enough rep yet to get exceptional contracts? Just updated the post, there were request for trivial and significant contracts Quote Link to comment Share on other sites More sharing options...
severedsolo Posted May 18, 2016 Share Posted May 18, 2016 1 hour ago, linuxgurugamer said: Ummm, rep = 1000. This was a test, so I set it to very easy. Also, the RoverDeploy contracts don't require exceptional, they will do all May still be on to something. Try setting it to 950 or something, in a stock game you can't hit 1000 can you? Quote Link to comment Share on other sites More sharing options...
AlphaAsh Posted May 18, 2016 Share Posted May 18, 2016 13 minutes ago, severedsolo said: May still be on to something. Try setting it to 950 or something, in a stock game you can't hit 1000 can you? Aye. IIRC 999 might be the maximum, and 1000 might actually be part of the problem. Quote Link to comment Share on other sites More sharing options...
severedsolo Posted May 18, 2016 Share Posted May 18, 2016 I guess this is the right place to ask. Did anything ever come of that Astronaut training contract pack that someone was working on (I forget who). I'd be interested in giving it a go. Quote Link to comment Share on other sites More sharing options...
Enceos Posted May 18, 2016 Share Posted May 18, 2016 @nightingale I added my log and vid to the issue #509 Btw, here's what it looks like: Quote Link to comment Share on other sites More sharing options...
linuxgurugamer Posted May 18, 2016 Share Posted May 18, 2016 5 hours ago, AlphaAsh said: Aye. IIRC 999 might be the maximum, and 1000 might actually be part of the problem. Well, I set it to 1000 in the game cheat menumerated. I'll try a lower number when I get home Quote Link to comment Share on other sites More sharing options...
nightingale Posted May 19, 2016 Author Share Posted May 19, 2016 On 18/05/2016 at 0:35 AM, gamerscircle said: Bare with me on this, I am assuming the persistent file? Yup On 18/05/2016 at 4:09 AM, tomf said: Hi, I just got an error from Contract configurator Exception occured while saving ScenarioModule 'ContractVesselTracker': System.NullReferenceException: Object reference not set to an instance of an object at ContractConfigurator.Extensions+<>c__DisplayClass5_1.<GetHashes>b__1 (.ProtoPartSnapshot childPart) [0x00000] in <filename unknown>:0 at System.Linq.Enumerable+<CreateWhereIterator>c__Iterator1D`1[ProtoPartSnapshot].MoveNext () [0x00000] in <filename unknown>:0 at System.Linq.Enumerable.First[ProtoPartSnapshot] (IEnumerable`1 source, System.Func`2 predicate, Fallback fallback) [0x00000] in <filename unknown>:0 at System.Linq.Enumerable.FirstOrDefault[ProtoPartSnapshot] (IEnumerable`1 source) [0x00000] in <filename unknown>:0 at ContractConfigurator.Extensions+<GetHashes>d__5.MoveNext () [0x00000] in <filename unknown>:0 at System.Linq.Enumerable.Contains[UInt32] (IEnumerable`1 source, UInt32 value, IEqualityComparer`1 comparer) [0x00000] in <filename unknown>:0 at System.Linq.Enumerable.Contains[UInt32] (IEnumerable`1 source, UInt32 value) [0x00000] in <filename unknown>:0 at ContractConfigurator.ContractVesselTracker+<>c__DisplayClass14_0.<OnSave>b__1 (.Vessel v) [0x00000] in <filename unknown>:0 at System.Collections.Generic.List`1[Vessel].GetIndex (Int32 startIndex, Int32 count, System.Predicate`1 match) [0x00000] in <filename unknown>:0 at System.Collections.Generic.List`1[Vessel].Find (System.Predicate`1 match) [0x00000] in <filename unknown>:0 at ContractConfigurator.ContractVesselTracker.OnSave (.ConfigNode node) [0x00000] in <filename unknown>:0 It was after hitting recover on a submarine contract that I think came from tourism plus. I hit ignore and the contract has been completed and I haven't noticed any ill effects yet Could you raise it on GitHub for me? On 18/05/2016 at 7:55 AM, severedsolo said: I guess this is the right place to ask. Did anything ever come of that Astronaut training contract pack that someone was working on (I forget who). I'd be interested in giving it a go. Trying to remember who was looking at it, but drawing a blank. I'm fairly certain that you wouldn't be stepping on any toes if you ran with the idea (and I don't think anyone got all that far anyway). Quote Link to comment Share on other sites More sharing options...
ArmoredReaper Posted May 20, 2016 Share Posted May 20, 2016 I am trying to create a contract pack, but I ran into a little problem... My satellite contract will have a specific orbit assigned to it, but I cannot figure out what each symbol means. I need to know what and how to get the following parameters, - SMA (Semi-major Axis?) - ECC (Eccentricity) - INC (Inclination) - LPE (?) - LAN (Longitude of Ascending Node?) - MNA (Mean Anomaly?) - EPH (?) - REF (Reference Body) Each one that has a question mark is one that I want to know, but I would also thank if the rest is also checked. Thanks in advance, ~TheArmoredReaper Quote Link to comment Share on other sites More sharing options...
kananesgi Posted May 20, 2016 Share Posted May 20, 2016 I am curious if this is possible with Contract Configurator. Would it be possible to create a contract that would require a specific science instrument (or group of instruments) to be placed within a specified biome and require periodic data collection from the instrument over an extended time frame? Not sure if that came out understandably, so an example might be helpful: Contract requires a goo-pod be landed in Kerbin's Deserts biome. Contract then requires a total of 12 science reports with a minimum of one month between them. Data must be collected and stored (or returned to KSC) and the experiment reset with each report (so the data cannot just be transmitted, a kerbal must physically collect the data and restore the pod). Once all 12 reports have been returned to KSC, the contract is complete. The reason for this is to fulfill an idea I had for extended duration science gathering, to make ground bases useful for more than just resource development. Since I have no idea how to create a plugin to modify how science is generated, I thought maybe I could do something similar with contracts instead. Quote Link to comment Share on other sites More sharing options...
nightingale Posted May 20, 2016 Author Share Posted May 20, 2016 14 hours ago, ArmoredReaper said: I am trying to create a contract pack, but I ran into a little problem... My satellite contract will have a specific orbit assigned to it, but I cannot figure out what each symbol means. I need to know what and how to get the following parameters, - SMA (Semi-major Axis?) - ECC (Eccentricity) - INC (Inclination) - LPE (?) - LAN (Longitude of Ascending Node?) - MNA (Mean Anomaly?) - EPH (?) - REF (Reference Body) Each one that has a question mark is one that I want to know, but I would also thank if the rest is also checked. Thanks in advance, ~TheArmoredReaper LPE = Longitude of the periapsis EPH = Epoch - basically a timestamp reference That being said - you don't need to understand the orbits. The easiest thing to do is just put a ship in the orbit you want (via hyperedit works), and then copy the orbit information from the persistence file. 10 hours ago, kananesgi said: I am curious if this is possible with Contract Configurator. Would it be possible to create a contract that would require a specific science instrument (or group of instruments) to be placed within a specified biome and require periodic data collection from the instrument over an extended time frame? Not sure if that came out understandably, so an example might be helpful: Contract requires a goo-pod be landed in Kerbin's Deserts biome. Contract then requires a total of 12 science reports with a minimum of one month between them. Data must be collected and stored (or returned to KSC) and the experiment reset with each report (so the data cannot just be transmitted, a kerbal must physically collect the data and restore the pod). Once all 12 reports have been returned to KSC, the contract is complete. The reason for this is to fulfill an idea I had for extended duration science gathering, to make ground bases useful for more than just resource development. Since I have no idea how to create a plugin to modify how science is generated, I thought maybe I could do something similar with contracts instead. It's doable, but would look a bit ugly. You'd need to do a CollectScience, followed by a Duration to wait, followed by a CollectScience, etc. You'd need to do a completeInSequence=true for all of them so that it all has to be done in order. Quote Link to comment Share on other sites More sharing options...
nightingale Posted May 21, 2016 Author Share Posted May 21, 2016 Alright, I'm back from travelling, and slowly working through the backlog of issues that have built up. For the docking issue reported by @Lennartos, @Enceos, @Galenmacil and @tomf, I need some help verifying the fix. I'll need someone to grab the dev dll here and let me know if it fixes the issue. If it does not fix the issue, then I'll need some verbose logging. To do that, put the following in GameData/ContractConfigurator/ContractConfigurator.cfg: CC_DEBUGGING { // Possible LogLevel: VERBOSE, DEBUG, INFO, WARNING, ERROR logLevel = DEBUG ADD_LOGLEVEL_EXCEPTION { // Type name type = ContractVesselTracker // Possible LogLevel: VERBOSE, DEBUG, INFO, WARNING, ERROR logLevel = VERBOSE } } Then reproduce the issue and submit a KSP.log. Quote Link to comment Share on other sites More sharing options...
casper88 Posted May 22, 2016 Share Posted May 22, 2016 hey there nightingale...not sure if its this mod or waypoint manager..but I have several survey contracts from the DMagic survey group that the waypoint doesnt get removed once completed. It doesn't happen consistently with every contract...just a few I have in game right now . There is no error in the debug screen in game. ....After a game restart the ghost waypoints had gone. not sure what the issue was ...maybe the kraken Quote Link to comment Share on other sites More sharing options...
nightingale Posted May 22, 2016 Author Share Posted May 22, 2016 (edited) 5 hours ago, casper88 said: hey there nightingale...not sure if its this mod or waypoint manager..but I have several survey contracts from the DMagic survey group that the waypoint doesnt get removed once completed. It doesn't happen consistently with every contract...just a few I have in game right now . There is no error in the debug screen in game. ....After a game restart the ghost waypoints had gone. not sure what the issue was ...maybe the kraken I'd need to see a log. Also, what contracts are those? DMagic has a lot of stuff that doesn't use Contract Configurator, so please be specific. EDIT: Actually, more than likely this is the same issue as reported in #519. Edited May 22, 2016 by nightingale Quote Link to comment Share on other sites More sharing options...
nightingale Posted May 22, 2016 Author Share Posted May 22, 2016 @brainy - I had a look at your issue, and it's most likely due to a part mod that hasn't been updated to 1.1.x. What happens is that the part fails to load and leaves an invalid entry in the list that messed up other mods. I'd need to see a full log to be able to investigate further. Quote Link to comment Share on other sites More sharing options...
kugutsu Posted May 22, 2016 Share Posted May 22, 2016 (edited) Hi, I am having a bit of a contract problem that I think might be linked to CC. It is with the 'First Space Station' contract. I have built a station, launched it and got it into orbit empty, then launched a crew, who spent 30 days there. I then undocked their capsule and brought them home safe. Problem is, these last parts don't seem to register, and the contract won't complete, despite all the mission objectives having been met. Any help would be appreciated! If more info is needed, I am happy to provide it, if you tell me what you need. Thanks! Edit: here is a screenshot of the mission objectives. They should all in fact be complete, as I have fulfilled all of them: http://imgur.com/RF9onEJ Edited May 22, 2016 by kugutsu Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.