Plane Crazy Posted December 22, 2018 Share Posted December 22, 2018 Jeb went to the North Pole. Quote Link to comment Share on other sites More sharing options...
Cavscout74 Posted December 22, 2018 Share Posted December 22, 2018 My 1.5.1 career hit a milestones today - first Moho probe landed. I also started sending a small fleet of probes to Jool for the second Jool transfer. Moho lander in low orbit, looking for a suitable landing site After burning off the remaining transfer stage fuel, the lander continues down on its own. I traded actual landing gear for cubic struts on this one and losing my last one (in 1.4.5) to a big gear bounce And safely on the ground, solar panels deployed, sending big chunks of science data back to KSC Launch of my Tylo combination relay & lander from KSC. It's already on it's way to Jool, along with a Laythe base. Bop & Pol combo relay/landers, plus assorted other satellites will be following close behind. And much to my surprise, I enjoyed the airline contracts from GAP (and the 10k funds per passenger from KSC to the Desert & back), so I ran another. Now that my Dash airliner has been tweaked a little better, flights are smooth & a little quicker than the first few. Quote Link to comment Share on other sites More sharing options...
tsd Posted December 22, 2018 Share Posted December 22, 2018 Today, I reached KEO for the first time ever! Then I made my first constellation of relay satellites! Quote Link to comment Share on other sites More sharing options...
ARS Posted December 22, 2018 Share Posted December 22, 2018 Building a floatplane Quote Link to comment Share on other sites More sharing options...
Munbro Kerman Posted December 22, 2018 Share Posted December 22, 2018 New update, new Atlas Vs Spoiler Quote Link to comment Share on other sites More sharing options...
Hotel26 Posted December 22, 2018 Share Posted December 22, 2018 4 hours ago, tsd said: Today, I reached KEO for the first time ever! Then I made my first constellation of relay satellites! Congratulations!! That is such a good feeling. You have a lot more to look forward to, as well... Enjoy! Quote Link to comment Share on other sites More sharing options...
putnamto Posted December 22, 2018 Share Posted December 22, 2018 attached the docking arm to the station KSP alexus today, got this on my first try, well their was the test run of the launcher that didnt have solar panels, but that doesnt count. Quote Link to comment Share on other sites More sharing options...
Xurkitree Posted December 22, 2018 Share Posted December 22, 2018 I checked 1.6 and transferred my entire modlist there - apparently the only mod needing an update is Kopernicus - my planet packs have disappered. Everything else is great though! Quote Link to comment Share on other sites More sharing options...
RealKerbal3x Posted December 22, 2018 Share Posted December 22, 2018 30 minutes ago, Xurkitree said: apparently the only mod needing an update is Kopernicus Of course -- Kopernicus is version-locked, which means it will only work on the versions it is designed for. So if Kopernicus works on 1.5.1, it won't work on 1.4.5 (unless there's a backport) or 1.6.0. Quote Link to comment Share on other sites More sharing options...
eddiew Posted December 22, 2018 Share Posted December 22, 2018 On 12/19/2018 at 7:50 PM, duesenmilan said: @INTERNAL[KV3_IVA] { @MODEL { %translation = 0 , 0 , 0 %rotation = 90 , 0 , 0 } } Yes, thank you, that was the magic! My final script worked out as this: @PART[kv2Pod] { @MODEL { %rotation = 0,-90,0 } } @PART[kv3Pod] { @MODEL { %rotation = 0,-90,0 } } @INTERNAL[KV2_IVA] { @MODEL { %translation = 0 , 0 , 0 %rotation = 0 , 0 , 90 } } @INTERNAL[KV3_IVA] { @MODEL { %translation = 0 , 0 , 0 %rotation = 0 , 0 , 90 } } Which spins the IVAs and models of the KV2 and KV3 pods so that the kerbals' feet point "down" in relation to the control axes. But it does mean that the 'front' window is pretty rubbish. On the whole these are not good lander cans from the pilot's perspective x) Quote Link to comment Share on other sites More sharing options...
ShawnPhillips Posted December 22, 2018 Share Posted December 22, 2018 Some of my mods derped with the 1.6 update, So until the mods are updated I desided to build some stuff with all 100% Stock (plus Making History) parts. So I made a flying Tank. Quote Link to comment Share on other sites More sharing options...
Jebediah Kerman Jr. Posted December 22, 2018 Share Posted December 22, 2018 I built a new Mun Base, I call it Young Base after John Young. Quote Link to comment Share on other sites More sharing options...
Eriksonn Posted December 22, 2018 Share Posted December 22, 2018 I wanted to have a go at 1.6 but since my mods didnt work i just put all of them to the side and did a pure stock mission for once. It became my first ever manned Tylo landing using the largest rocket i have ever flown.(First time using the new even larger tanks) I landed successfully but had a bit less fuel on the way home than expected. Only 1000 dv in low Tylo orbit, but i know i can do it as when i came from Kerbin to Jool I used gravity assists to get a good Tylo encounter with almost no dv at all so if just manage to do that in reverse it should work out. I hope... I really like the new stage info also. Not as informative as kerbal engineer but it still didnt really feel that anything major was missing in terms of info compared to with the mods. Quote Link to comment Share on other sites More sharing options...
Daveroski Posted December 22, 2018 Share Posted December 22, 2018 25 minutes ago, Jebediah Kerman Jr. said: I built a new Mun Base, I call it Young Base after John Young. Wellll... If you say you did, I'm sure you did... but many people on here are of the firm belief that if there is no pic... well.. it didn't happen. Not me of course.. I believe you. Really I do.. Just saying... Quote Link to comment Share on other sites More sharing options...
GDJ Posted December 22, 2018 Share Posted December 22, 2018 Gave 1.6 a whirl. Did some text editing in the KSP settings file that works well with my system and so far so good. Loads up properly with no tomfoolery. Quote Link to comment Share on other sites More sharing options...
Jebediah Kerman Jr. Posted December 22, 2018 Share Posted December 22, 2018 29 minutes ago, Daveroski said: Wellll... If you say you did, I'm sure you did... but many people on here are of the firm belief that if there is no pic... well.. it didn't happen. Not me of course.. I believe you. Really I do.. Just saying... I play KSP on my son's XBox (I am a cheapskate), sorry for no pic. I am looking to get KSP on steam, however. Quote Link to comment Share on other sites More sharing options...
Xurkitree Posted December 22, 2018 Share Posted December 22, 2018 Today I fixed my Mk6 Gladius SSTO, designed to go to Ascelpius - It wouldn't lift off from the Runway at all and the problem was - I kept the rear Landing gear too far behind. Moving it closer to the Dry COM immediately helped - its started nosing up at 40 m/s and took off properly at 100, with a bunch of runway to spare. Quote Link to comment Share on other sites More sharing options...
Superfluous J Posted December 22, 2018 Share Posted December 22, 2018 (edited) Not really "Today" but "this week," essentially since 1.6 came out, I've been playing an ALMOST stock install. In particular, no maneuver or planning aids. I would like to announce today that I have mastered nailing transferring to and from Kerbin, to and from any other world, using stock tools only and very efficient methods. Just today I transferred directly to Ike from LKO without looking anything up or measuring any angles or doing any math, just maneuver node tricks. Then, once done at Ike, I returned directly to Kerbin the same way, from Low Ike Orbit. 99% or so of the burn is done in low orbit of the starting world, and the other 1% or so is a mid course correction. I'm not counting the slowdown burns in those percentages of course. I've not felt this accomplished since I learned to consistently land on docking ports. Edited December 22, 2018 by 5thHorseman Quote Link to comment Share on other sites More sharing options...
Angelo Kerman Posted December 22, 2018 Share Posted December 22, 2018 Today I put together a preview of all the new and revised Sandcastle parts: There are a couple of items missing so this is a WIP image but it's nice to see my hard work in one place. Quote Link to comment Share on other sites More sharing options...
blorgon Posted December 23, 2018 Share Posted December 23, 2018 Now that fall semester is over I've been working on a heavy rover delivery system for an unmanned ballistic aerocapture Duna mission. Heatshield + aerocapture, then drogues, then a short propulsive maneuver to bring the puck down to about 0.5 m/s, all using bits from an old kOS script I wrote last year. Now that I've done the proof of concept, I need to go through the Duna script and overhaul it because it's a mess and I'm using a new library system. Still lots of work to do. Quote Link to comment Share on other sites More sharing options...
Xurkitree Posted December 23, 2018 Share Posted December 23, 2018 I made this in 1.6.0 and drove it on Laythe. Pretty fun! Also this. Quote Link to comment Share on other sites More sharing options...
magnemoe Posted December 23, 2018 Share Posted December 23, 2018 Moho science opperations. The mohole, first attempt was an abort and suborbital jump south as terrain was far more rugged than expected. Sent an small recon probe and landed next to it. Quote Link to comment Share on other sites More sharing options...
NHunter Posted December 23, 2018 Share Posted December 23, 2018 Today, the crew of KSS Discovery has planted a flag on the surface of Vall Quote Link to comment Share on other sites More sharing options...
RealKerbal3x Posted December 23, 2018 Share Posted December 23, 2018 I created a new bone-stock 1.6.0 install and fired it up. Boy does it load fast! While I won't be stopping my original modded install by any means, I kind of want to go back to the roots of KSP and remind myself how it is to play without mods. Quote Link to comment Share on other sites More sharing options...
Raptor42 Posted December 23, 2018 Share Posted December 23, 2018 Let's act like I never ever used Alt+F4 for creating new quicksave Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.