Jump to content

What did you do in KSP1 today?


Xeldrak

Recommended Posts

I built and posted Light Saber on Boxing Day:

DWMsK3v.png

2.6 km dV.  10 krew.  (And no clipping.)

                                                                                                                                     

One nice aspect of it is that it is extensible -- so this is its heir, the Magellan Light Cruiser, or LMC, for short:

Uz2iBrm.png

8PKZkoV.png

3.5 km dv, 2.3 m/s2 and a TWR (Mun) of 1.6.

I'll post the LMC as soon as I have it mounted on a Spunk lifter...  and have 'shaved' its ugly legs.

And  ...oh yeah: no clipping.

Edited by Hotel26
Link to comment
Share on other sites

(1.8.1, Making History, Breaking Ground, Kerbalism and many mods)

Last night I created a new very odd rocket. One I call "Shell Squared" aka as Cryer 6 for it having cryogenic engines. Why such a funny name? First ever contract to try bringing two air stream protective shells on the same launch. One small shell inside another surrounding the capsule. Here is a pic:

ShellSquared01.jpg

Not sure if I will get an error similar to one where you have a parachute inside a protective shell and when you launch it nothing happens. This makes sense but I thought the explosion may cause issues with one inside the other. It did not, so here is the mission.

Please note, the capsule also has a pair of small hardpoints which makes it look kinda like a batman tool or something.. lol

Mission of the Shell Squared launch.

ShellSquared1.jpg

Spoiler

ShellSquared2.jpg

ShellSquared3.jpg

Here is the staging of the inner 1.875 shell.  (hmm no issues with it at all, only the noise)

ShellSquared4.jpg

Now the outside 3.75 shell and bang, all worked well.

ShellSquared6.jpg

Now I need to align myself to make sure I am getting towards land for the last test.

ShellSquared7.jpg

Ok lets go home for the test.

ShellSquared8.jpg

Hello Batman! (hehe)

ShellSquared9.jpg

Spoiler

ShellSquared10.jpg

ShellSquared11.jpg

ShellSquared12.jpg

All tests done, thank you Valentina!

ShellSquared13.jpg

Link to comment
Share on other sites

Having recently tested and rejected a concept for a solar-powered Eve drone, mission control locks up the snack machine in the engineering department and instructs the team to try harder if they want to see it again. This seems to spur many brilliant ideas, and a new, more efficient design is put forward, using an alternative type of electric propulsion (as provided by the Thor Tech mod, which is far more powerful than stock propellers, and doesn't fall apart in timewarp, but also costs a lot more electrical power to run).

Y1Tn0qm.jpg

At this altitude, Evodrone's solar panels are functioning far better than on Kerbin, and the drone can open up the throttle and head for its destination at a comfortable 150m/s (and 4x timewarp).

As we dip lower however, either due to increasing temperatures or a layer of thick cloud above, the energy income begins to suffer, and Evodrone has to restrict itself to ~60% throttle for sustainable cruise. Fortunately, that's quite enough to keep it airborne. Almost anything will fly on Eve, and it's surprisingly hard to crash.

qpm98LY.jpg

The lack of satellite signal at the landing point was a gaffe, but happily not a fatal one, since it turns out there are some functions that can still be controlled even after the main link has been lost, and combined with the low falling speed, Evodrone manages to touchdown with no damage.

RMDt2OT.jpg

And apparently landed in a very feature-rich environment, finding three different things to scan within a few minutes.

etEulzR.jpg

While we didn't test Evodrone for its aquatic capabilities, it turns out it is indeed capable of landing on Eve's ocean... and taking off again.

1000 units of electricity turn out to be sufficient to allow Evodrone to make a full-throttle burn up to the cloud layer again, at which point it returns to full operating power and is able to recharge on the longer hops between biomes.

Other than the looks, there is one design flaw: when flying with the sun on one side, the scanning arm will cast a shadow over 50% of the solar panels. While it is possible to enter a sustainable cruise, it does mean the fastest speeds are only reachable when travelling east-west. This is basically fine, because the original goal was to check out some surface features and land in 3 biomes, which has happened :)

Edited by eddiew
Link to comment
Share on other sites

I cloned a tourist.

34A5EA0F107144F0C779782933189ABBFFC2A181

Not the first time it happened. I think it's due to some mods asking me if I want to load passengers when going on the launchpad, and the craft takes some time to load (at some point it's probably in an empty state, hence the popup asking me if I want to get passengers, then it load the crew saved in the VAB, and the extra passengers).

Note that both the original and the clone seems totally not OK with taking of.

I also did had some weird staging gone wrong due to autostruts.

C25BA3D9A380B65C04B8823C81E553D87D9482C9

Replacing the autostruts by mechanical struts fixed it. But at least that was some fun unplanned rapid disassembly tests :)

Link to comment
Share on other sites

I took one of my capsule recovery airships, UKS Led Zeppelin, on a bit of a shakedown cruise.

RcMGl5b.png

Out of the hangar (provided by Kerbinside Remastered).

MnlNCFv.png

After clearing the hangar, I decided to take the airship to its maximum altitude. It will never need to do this in normal operations, but it's nice to know the limit of its performance.

kYn743Y.png

Turns out, it can reach around 15km before losing static lift. The sky is black at this altitude.

eKmAlTn.png

With that complete, Captain Jenzon ordered that the ship be returned to its hangar - but not before a maximum speed test is completed. I did not get a screenshot of this, but it reached around 85m/s.

se2s1Yq.png

Finally, with the ship returned to the hangar, I took a little 'family photo' with the crew.

Many thanks to @Angel-125 for the excellent Heisenberg mod :D

Edited by RealKerbal3x
Link to comment
Share on other sites

So, that's the thing: I found this on the web, and boy... What a hell of a concept. This can be done on KSP?

Spoiler

08.jpg

 

Well.. Let's see!

First attempt (with FAR, that I'm using on another Sci Fi vessel lately and though it could help):

0001.jpg

 

Well, looks promising!!!

0002.jpg

 

But it was not. Damn. :(

0003.jpg

 

Well... Back to the drawing board - and getting rid of FAR, this thing made things realistically hard, and I'm doing SciFy unrealistic crafts, right?

So, a bit longer tail and engine vectoring to assist on the taking off (thrust vectoring? for what? Vector the whole engine!!! :D )

0001.jpg

 

Taking off worked as intended...

0003.jpg
 

It's flying!!! Ohoww!!

0006.jpg
 

Now let's hit the afterburner and get some altitude! This looks promising!! :)

0008.jpg

But it was not. :(

0009.jpg
0011.jpg

Well... With the pod sunk, all what's left to be done is some swimming back to KSC. Really, KSC should really had invested on some rescue ships by now....

0012.jpg

 

Ok. Back (again) to the drawing board. What I did wrong?

Some balance, some tweakscaling , some more fuel, reworking the CoM and we are back to business!

0001.jpg

Looks promising!!! :)

0002.jpg

 

But it was not... :(

0003.jpg
 

 

I need more authority on the control surfaces, as it appears. So, after some rebuilding, let's give it another shot!

0001.jpg
0002.jpg

Yeah! The thing is more controllable now! Looks promising!

0004.jpg

But it was not. :(

0005.jpg

 

After a lot of further testing, I figured out that the vectoring engines where misplaced, I needed to move them closer to the CoM, that was the problem since the beginning! So I finally made the thing to fly properly!

0001.jpg
0003.jpg

Looks fine. Time to hit the afterburners to gain some altitude! (crossing the fingers)

0004.jpg

And she flies! Boy, how she flies!!!

0006.jpg

Without the afterburners, the pod can't sustain the altitude, but it kinda glides controllable to near ground - I should try this with the Ground Effect Add'On! :)

0008.jpg

Now, for some good looking views of KSC:

0009.jpg
0014.jpg

0017.jpg

Excellent! Now going for landing, this one looks promising!!!

0019.jpg

But it was not. :(

0020.jpg
0021.jpg

Well... The thing didn't exploded, but it was going away!! Let's chase it!

0023.jpg
 

And now, how I turn it flip it back? (the engine are still burning!)

0024.jpg
0025.jpg

 

Let's try a stunt. I will cut the inner engines and accelerate the outer ones, taking advantage of their lower position, in order to try to flip it back! Looks promising!!!

0026.jpg

But it was not. DAMN! :(

0027.jpg

Okey, no more flying today! :D 

0028.jpg

Lots of pictures were ripped off (and reduced) to prevent choking (too much) mobile phones. The whole (better resolution) picture set is on my site here.

Edited by Lisias
Some entertaining grammars made less entertaining.
Link to comment
Share on other sites

I finally used the KAL controllers from BG for something... they weren't so hard ot use after all, but its annoying that I needed to use 3 for 3 functions (unless there's a way I'm not aware of).

Anyway, I set up quad rotor controls for my quad tilt rotors like this:

xZ5a1QX.png

So that they have motor/aero control while in a hover, and don't just need tons of reaction wheels for hovering. Pitch/yaw/roll control in a hover is acheived by modifying motor outputs.

Link to comment
Share on other sites

Finally researched the parts to put be able to put up an LKO Kommunications network, so built a launcher and 4 satellites.

kxzfvkU.png

It got to orbit with over 2500m/s remaining, bit of an overkill so I removed the entire third stage.

10YiG3z.png

...and it still made it to orbit with nearly 1500 m/s.  I clearly need to practice my builds, but with my new low TWR upper stage launch profile it's taking a bit of getting used to.

Annoyingly I ended up with the solar panels clipping though the kOS module but couldn't be bothered to revert and change it.  

tERedKY.png

I do love a nice resonant orbit though

NKI1ndr.png

 

Link to comment
Share on other sites

Brought them home!

N3X0qyj.jpg

...which wasn't all that hard, since most things went to plan.

What had been forgotten was to actually put a decent antenna on the Dunaworrybehappy's crew section, with the result that as soon as it left Dunan orbit, all signal with home was lost until it entered Kerbin's SoI. This meant that instead of spending 250+ days processing and transmitting data from the lab, it instead arrived in LKO with over 5000 raw data points. 

While the initial descent plan involved discarding the empty lab and letting it burn up, mission control really didn't want to say goodbye to all that data... but nor did they want to leave Sakura and Lilly up there to crew it for another year, since the press were already asking if there's a technical problem in bringing the crew to ground. Instead, we had engineering quickly cobble together the Deorbinatrix - a one-purpose probe that first attached a control module to the lab so's we won't lose it amongst the other junk up there, and then provided the means for the Dunaworrybehappy's un-engined command pod to begin the descent. With this done, we are now free to send up additional crew to the Dunaworrybehappy's lab at any point if we wish to tap into that un-tapped data reserve.

Also, we made a cool new spaceplane with three engines and reversed wings... but forgot to give Val and Astra a camera when they flew it to return the crew of the Pielab to ground. Nonetheless, it was a successful flight and not a single wheel exploded upon landing. Definitely not.

With all active crew back in the kerbonaut quarters at KSC, thoughts turn, inevitably, to further goals. Questions are being asked about Moho but... it's kind of small and round and boring. There are legends of a planet called Dres but... we haven't been able to verify them. No. Jool, we think, is the right target. That shining, healthy-green jewel of the night sky that has called to astronomers and scienticians since Kalileo first turned his telescope upon it.

Soon Jool. Soon, we will come for you. Prepare your bodies.

Link to comment
Share on other sites

On 12/28/2019 at 2:08 PM, Delay said:

Wha... What!?

How did that happen? And in wireframe, too?

Kerbal Object Inspector will render the mesh of an inspected object in wireframe. Typically, this is shown like an overlay of the model so you see it in place. This occured because I had previously been inspecting meshes inside the cabin from IVA, when I jumped back to the external view, presumably due to positional data changing with reference to the camera, or perhaps something like the reference for that part of the model disappearing, the wireframe appeared in the heavens.

Link to comment
Share on other sites

Got KIS and KAS. Had fun with a crane and a DIY reentry capsule (actually, a lot less fun and a lot more pushing the lander can in the general direction of the heat shield). Also attempted a DIY Minmus ground base, but I scrapped it after I learned that it's really hard to bolt a base to the ground so flying kerbals don't knock it over. With KIS, i also made a Krakenbait physicsless rover which rapidly disassembled, which was actually planned.

I also grabbed Physics Range Extender and tried to see how hard it would be to create a geosynchronous space elevator thingie with KAS ropes and things. Turns out it's very hard, and very tedious.

Yesterday, though, I completed the Kerbin Tour: basically Jool 5, but with Mun and minmus instead of Jool's 5 moons. The center of mass was off because I couldn't find a way to dock the Mun lander inline, and so it offset it majorly and affected all maneuvers by a lot. And the Mun lander was already pretty stripped down: it had to use over half of its docking RCS to get back into Munar orbit. I bet it would've been easier with a command chair design like the Minmus lander.

Link to comment
Share on other sites

Still waiting for Kopernicus, enabled the new graphics, and tested a new quad rotor on Duna.

First I tried the medium sized  heli blades, and it flew empty but not with the desired 40 ton payload.

Then I increased the rotor and wing area, it got over 150 m/s empty, but couldn't transition to full forward flight with the 40 ton payload... it still managed about 80 m/s with semi-tilted rotors.

xNnfAeo.png

0hJeBZA.png

8hf7fqn.png

Rotors stopped and at no AoA provide a lot of effective wing area, and it glides quite well like this:

msIj3Md.png

Edited by KerikBalm
Link to comment
Share on other sites

My mission to Moho ended with a proper Kerbal flourish today, as I realized while burning towards home I'd forgotten to put parachutes on the return capsule. No matter, I thought, the Kerbals can just grab the science and bail out after the ballistic flight has settled down. I managed to do just that, and Bill, Bob, and Valentina glided safely down to Kerbin...

Unfortunately, none of them could hold on tight enough with their little mittens to pull the science data from the capsule, so I lost two landings' worth of science. Oh well, I mostly did it for the fun of it and the challenge of the enormous delta-V requirement.

Link to comment
Share on other sites

( KSP 1.8.1 - No major mods... yet ! )

After spending the last 3 days doing only that, I'm pretty much done fixing my KSP1.8...
Revamped some plumes for my own "End game ion engines" you've been seeing in 1.7.3 - and getting better playing around with RealPlume.
Then got all my mods... Still missing OPM because Kopernicus is not updated yet, and also no SVE either because the links to the config files are dead (see SVE thread about that if curious...)
Also gave ReStock a try and fixed a few incompatibilities...  Upgraded most of my parts at the same time, including many hours fixing broken internals and other errors I saw in the KSP.log.

Finally I got a DMagic's mod to change the science multipliers of every body in KSP (save for Kerbin) and set their science multiplier to 1.  Which means a temperature scan of Moho, Mün, Jool or Eeloo is *ALWAYS* worth 8 science. 
Since I am playing a Science GrandTour (and hopefully follow thru this time around :rolleyes:) I want science to be slower but not nerf the early game.  The mod is perfect for this.
Basically each body will have it's own Plane/Rover/Hopper that my Kerbals will use to go to every biomes...

... So I imported/fixed my Laythe Seagull plane from KSP1.22, and teleported her on Laythe for shakedown cruise. 
I still need to fix a few glitches here and there, but she can set throttle at 1/3 once in the air and maintain ~105 m/s speed.
When I start my 1.8 career, these need to be ready not to waste all my free time designing stuff.

Here are two pictures of her (not yet final version, I think) :
S8YH7np.jpg
vpXwQJP.jpg
            The 'Seagull' Seaplane, powered by a small nuclear reactor and 4 'Falcon' Electric engines. Ladders/Breaks/Antenna deployed and science bay opened.

 

She can't keep her antenna deployed while flying, because that would break it.  So each biome w have to come down to transmit science and clean experiments.
The back seat is used by a Scientist, so he can do just that.  The middle part with 4 windows? roleplay it as a shared 'bed room', and the cockpit obviously to handle the plane.
So 3-kerbal crew taking shifts between sleeping/working.

Why the solar panels with a reactor?  Reactors do not fill the batteries 100%, and the Reactor does not need to operate when the engines are off. 
The final version will feature more of the gorgeous ReStock large solar panels as they only give ~0.8 electric charge each.
Also need to fix some lights, adjust some nosecones and a few nagging little issues.

The craft has a tucked-in science box to gather experiments (Good for repeats, I like to transmit once then keep another batch stored for eventual return to KSC), and one of each experiments (ReStock as a very nice material's bay!)
It also has a docking port bay, which will be used to get this thing to Laythe in the first place, the legit way... First a large Solid Booster for high-Kerbin altitude when props shutdown, then the transit/Laythe insertion maneuvers.

Thanks for reading and have a good day everyone !
- - - - - - - - - - - - - - - - - -


[ EDIT ]
 @Warro You're a genius man.  I was getting a lot of NRE about 'FSplanePropellerSpinner' module... and have been for as long as I can remember with FireSpitter. Doing a Google Seach. I found a KSP thread from 2 years ago.
Well, I tried your fix and ... well... IT WORKED !  No more exceptions spamming the logs.  Such an easy fix too. 
In case anyone has this driving them crazy, I am referring to this post :

Thanks again Warro !

Edited by Francois424
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...