Jump to content

[1.8+] Procedural Fairings

pap1723

By pap1723
in KSP1 Mod Releases

 Share

Recommended Posts

softweir

softweir

Posted
Posted
1 hour ago, protonv said:

Does this mod still work with 1.11?

I came here to find out the same thing! Reading just a few posts above yours suggests that yes, it works, but there are some issues. See the following post:

 

On 1/28/2021 at 5:44 PM, xebx said:

*snip*

But like others said there are a few weird things :

- internal decoupler doesn't work and tend to mess with MJ deltaV, i've removed every decoupler module from all PF parts (using // in original files and RO patch files) -> problem solved

- setting the ejection power and torque is messy, i had one rocket where the fairing would systematically hit the nearest bottom fuel tank even if i gave it more than enough room to move away and tried to tweak ejection values.

- you can't put back a fairing on a flipped upside down boattail, you need to detach the fairing base, flip it up, reattach it to your rocket, reattach the fairing, detach the fairing base, flip it down and reattach it to your rocket. (not a big problem but annoying)

- at large diameters the fairing base (simple ring or hollow ring) becomes too high, i adjusted it : height is 50% original for simple ring, and 90% for hollow ring. (the 2nd parameter is modified for : scale, node stack top and node stack connectors) -> it looks like it's working. ^_^

 

Link to comment
Share on other sites
razark

razark

Posted
Posted

The best way to find out if it works is to try it out and see.

No one has the same mix of mods as you do, so no one is going to be able to definitively answer if it will work for you.  Copy your KSP folder, install the mod to the copied version, and test it.  If it works, install it to your main, if not, you can either walk away, or put your time into figuring out what's wrong and how to fix it.

Link to comment
Share on other sites
FabioofSpace

FabioofSpace

Posted
Posted

Got a problem with the procedural fairings in which the fairing base causes the entire craft to freak out in the VAB when I try to move it.unknown.png
 

Spoiler
  • Advanced Jet Engine (AdvancedJetEngine v2.16.0)
  • AtmosphereAutopilot (Fly-By-Wire) (AtmosphereAutopilot v1.5.16)
  • B9 Aerospace Procedural Wings - Fork (B9-PWings-Fork 2:0.401)
  • B9 Part Switch (B9PartSwitch v2.17.0)
  • BahamutoD Animation Modules (BDAnimationModules 1:v0.6.6.0)
  • Breaking Ground (BreakingGround-DLC 1.3.1)
  • ClickThrough Blocker (ClickThroughBlocker 1:0.1.10.15)
  • Community Category Kit (CommunityCategoryKit v5.2.0.0)
  • Community Resource Pack (CommunityResourcePack 1.4.2)
  • Connected Living Space (ConnectedLivingSpace 2.0.0.6)
  • Contract Configurator (ContractConfigurator 1.30.5)
  • Custom Barn Kit (CustomBarnKit 1.1.21.0)
  • Deadly Reentry Continued (DeadlyReentry v7.8.0)
  • DMagic Orbital Science (DMagicOrbitalScience 1.4.3)
  • DMModuleScienceAnimateGeneric (DMagicScienceAnimate v0.23)
  • Easy Vessel Switch (EVS) (EasyVesselSwitch 2.1)
  • Editor Extensions Redux (EditorExtensionsRedux 3.4.2)
  • Environmental Visual Enhancements Redux (EnvironmentalVisualEnhancements 3:1.11.2.1)
  • FASA (FASA 1:v7.2.6)
  • Ferram Aerospace Research Continued (FerramAerospaceResearchContinued 3:0.16.0.2)
  • Firespitter Core (FirespitterCore v7.17)
  • Firespitter Resources config (FirespitterResourcesConfig v7.17)
  • Hangar Extender (HangerExtenderExtended 3.6.0)
  • Harmony 2 (Harmony2 2.0.4.0)
  • HumanStuff (HumanStuff 1:v1.3.1)
  • Infernal RO-Robotics (InfernalRoboticsRealismOverhaul 2.3.1)
  • Kerbal Alarm Clock (KerbalAlarmClock v3.13.0.0)
  • Kerbal Attachment System (KAS 1.7)
  • Kerbal Engineer Redux (KerbalEngineerRedux 1.1.8.3)
  • Kerbal Inventory System (KIS 1.26)
  • Kerbal Joint Reinforcement Continued (KerbalJointReinforcementContinued v3.5.2)
  • Kerbal Renamer (KerbalRenamer v1.4.0)
  • Kerbalism (Kerbalism 3.13)
  • Kerbalism - RealismOverhaul Config (Kerbalism-Config-RO v1.0)
  • Kopernicus Planetary System Modifier (Kopernicus 2:release-1.8.1-38)
  • kOS for All! (kOSforAll 0.0.5)
  • kOS: Scriptable Autopilot System (kOS 1:1.3.2.0)
  • KRASH - Kerbal Ramification Artifical Simulation Hub (simulation mod for KSP) (KRASH 0.5.33.3)
  • KSC Switcher (KSCSwitcher v2.0.0.0)
  • KSP AVC (KSP-AVC 1.4.1.5)
  • KSP Wheel (KSPWheel 1:0.16.14.33)
  • MagiCore (MagiCore 1.3.2.3)
  • Making History (MakingHistory-DLC 1.8.1)
  • MechJeb 2 - DEV RELEASE (MechJeb2-dev 2.11.0.0-1034)
  • ModularFlightIntegrator (ModularFlightIntegrator 1.2.7.0)
  • Module Manager (ModuleManager 4.1.4)
  • NavHud (NavHudRenewed 1.4.0.4)
  • Patch Manager (PatchManager 0.0.17.2)
  • PersistentRotation (PersistentRotation 1.8.7)
  • Precise Maneuver (PreciseManeuver 2:2.4.4)
  • Procedural Fairings (ProceduralFairings 1:v1.8.3)
  • Procedural Parts (ProceduralParts v2.1.2)
  • Procedural Parts - MainSailor's Procedural Textures - Essential Textures and Flag (MainSailorTextures-Essentials 2.0.0.0.1)
  • RasterPropMonitor (RasterPropMonitor 1:v0.31.4)
  • RasterPropMonitor Core (RasterPropMonitor-Core 1:v0.31.4)
  • RCS Build Aid Continued (RCSBuildAidCont 1:0.10.0)
  • Real Antennas (RealAntennas v1.3.0)
  • Real Fuels (RealFuels rf-v12.9.1)
  • Real Plume (RealPlume 2:v13.3.2)
  • Real Solar System (RealSolarSystem v18.1.4)
  • Real Solar System Textures - 8192 x 4096 (RSSTextures8192 v18.3)
  • RealChute Parachute Systems (RealChute v1.4.8)
  • RealHeat (RealHeat v5.1)
  • Realism Overhaul (RealismOverhaul v13.0.1)
  • Realistic Progression One (RP-1) (RP-0 v1.8.1)
  • ReStock (ReStock 1.2.1)
  • Retractable Lifting Surface Module (RetractableLiftingSurface 0.2.1.1)
  • RO Capsules (ROCapsules v1.3)
  • RO Engines (ROEngines v1.7)
  • RO Library (ROLib v1.2.1)
  • RO Solar (ROSolar v1.1.1)
  • RO Tanks (ROTanks v2.4.1)
  • RSS DateTime Formatter (RSSDateTimeFormatter 1.6.1.0)
  • SCANsat (SCANsat v20.4)
  • SmokeScreen - Extended FX Plugin (SmokeScreen 2.8.14.0)
  • Solver Engines plugin (SolverEngines v3.10.0)
  • SXTContinued (SXTContinued 2:0.3.29.5)
  • Taerobee - Stockalike X-1 & More (Taerobee 1:3.0)
  • Test Lite (TestLite 0.3.2)
  • TextureReplacer (TextureReplacer v4.4)
  • Textures Unlimited (TexturesUnlimited 1.5.10.25)
  • Toolbar Controller (ToolbarController 1:0.1.9.4)
  • Ven's New Parts (VenStockRevamp-NewParts v1.15.1)
  • Ven's Stock Part Revamp Core (VenStockRevamp-Core v1.15.1)
  • Warp Everywhere (WarpEverywhere 1.0)
  • WasdEditorCameraContinued (WasdEditorCameraContinued 0.7.3.1)
  • Waterfall Core (Waterfall 0.6.3)
  • Zero MiniAVC (ZeroMiniAVC 1:1.1.0.1)
     

KSP logs

Link to comment
Share on other sites
  • 3 weeks later...
  • 2 weeks later...
linuxgurugamer

linuxgurugamer

Posted
Posted

In a test install, minimal mods, this mod causes 1.12.1 to crash to desktop after selecting a fairing base in the VAB.   There are other oddities as well, but until this is fixed, can't isolate those

Log file shows absolutely nothing

 

Link to comment
Share on other sites
Cookie0815

Cookie0815

Posted
Posted (edited)
On 7/8/2021 at 11:49 PM, linuxgurugamer said:

In a test install, minimal mods, this mod causes 1.12.1 to crash to desktop after selecting a fairing base in the VAB.   There are other oddities as well, but until this is fixed, can't isolate those

Log file shows absolutely nothing

 

No CTD  for me, but a massive drop in FPS in the VAB/hangar when any part gets added BELOW any ProceduralFairing part (or part that has the PF module implemented).

Looks like it's the same problem mentioned in the KSP Recall thread about since KSP v1.11 the part cost recovery calculation is bugged for parts with zero inital costs, hence it's creating massive problem for refunding mods, resulting in a memory leak (my KSP.log is spammed with "KSP-Recall-Refunding] TRACE:" entries).

It's a bummer, i really like the PF-fairings. They free me from the cumbersome stock shell building. And they look much better.

Edited by Cookie0815
Link to comment
Share on other sites
linuxgurugamer

linuxgurugamer

Posted
Posted (edited)
27 minutes ago, Cookie0815 said:

No CTD  for me, but a massive drop in FPS in the VAB/hangar when any part gets added BELOW any ProceduralFairing part (opr part that has the PF module implemented).

Looks like it's the same problem mentioned in the KSP Recall thread about since KSP v1.11 the part cost recovery calculation is bugged for parts with zero inital costs, hence it's creating massive problem for refunding mods, resulting in a memory leak (my KSP.log is spammed with "KSP-Recall-Refunding] TRACE:" entries).

It's a bummer, i really like the PF-fairings. They free me from the cumbersome stock shell building. And they look much better.

I use Simple Adjustable Fairings - KW Rocketry Pack, they work well, look great, and are actually somewhat realistic.

I was using this because I was running a test for another mod which required this.  Couldn't figure out the problem until I removed this

Edited by linuxgurugamer
Link to comment
Share on other sites
Cookie0815

Cookie0815

Posted
Posted
9 minutes ago, linuxgurugamer said:

I use Simple Adjustable Fairings - KW Rocketry Pack, they work well, look great, and are actually somewhat realistic.

I was using this because I was running a test for another mod which required this.  Couldn't figure out the problem until I removed this

Funny thing i just recognized, CKAN already had installed the SAF-plugin as dependency from BDB .

As i'm playing mostly career, the already researched fairings from BDB are just a bit too tiny. (although very authentic).

Looks like I'm about to "cross the iron curtain"and install more part mods working with SAF (looking at you, Tantares) then.

There are never enough parts. :D (Especially if sorting through them is so easy, due to such fine mods like Filter Extensions, Janitor's Closet, Quicksearch and many more thanks to the modfather @linuxgurugamer).

Link to comment
Share on other sites
linuxgurugamer

linuxgurugamer

Posted
Posted
1 minute ago, Cookie0815 said:

There are never enough parts. :D (Especially if sorting through them is so easy, due to such fine mods like Filter Extensions, Janitor's Closet, Quicksearch and many more thanks to the modfather @linuxgurugamer).

Actually, there can be, too many parts makes the editor slow during searches, etc

Link to comment
Share on other sites
XrayLima

XrayLima

Posted
Posted

Seen a few folks looking to find out why the Thrust Plate is size limited to 1.5m or fairings to 3m etc - Its all slightly hidden in the release notes for v6.0 back in May:

Quote

"Notice for sandbox play: You must enable the difficulty setting to enable all PartUpgrades in sandbox, otherwise you will be overly restricted in the sizes you can set. This follows a trend with Procedural Parts."

Fixed it for me.

Link to comment
Share on other sites
  • 1 month later...
Akira_R

Akira_R

Posted
Posted
On 8/17/2021 at 9:34 PM, AlamoVampire said:

Does the current iteration function with the current version of ksp?

 

233408172021

Unfortunately It does not sound like it, If you look up through the comments above you will see a decent amount of discussion about it.

I certainly hope it gets an update from someone, I have been using it in one form or another for nearly 8 years now I think, maybe more, feels wrong without it and I'm just not a huge fan of the stock fairings :/

Link to comment
Share on other sites
AlamoVampire

AlamoVampire

Posted
Posted (edited)
29 minutes ago, Akira_R said:

Unfortunately It does not sound like it, If you look up through the comments above you will see a decent amount of discussion about it.

I certainly hope it gets an update from someone, I have been using it in one form or another for nearly 8 years now I think, maybe more, feels wrong without it and I'm just not a huge fan of the stock fairings :/

In the thread for the current ksp version @Spaceman.Spiff speculates it might work since it says 1.8+ but its speculation. If it does not work my current save is over. I will lose my ships and i will lose a memorial craft for my deceased best friend.  I am hoping it works. My luck in the last 10 days says otherwise. I may try tonight. 

180408202021

this situation is why ive always wished they made the stock fairings in the style of or used PF instead of what they used. But they went with what they went with. I tried them. Did not like them. Still do not like stock fairings. Many reasons why.

181208202021

Edited by AlamoVampire
Link to comment
Share on other sites
AlamoVampire

AlamoVampire

Posted
Posted (edited)

Im not sure what to do if they bug out in a dummy test save. I just know it will as i said end my save if they dont work. :sob:

183108202021

i will of course try what i can later (too hot in that room, poor air circulation from the ac in that room with my desktop) when it cools down. And ill update how it goes. 
183308202021

Edited by AlamoVampire
Link to comment
Share on other sites
Akira_R

Akira_R

Posted
Posted
27 minutes ago, AlamoVampire said:

Im not sure what to do if they bug out in a dummy test save. I just know it will as i said end my save if they dont work. :sob:

183108202021

i will of course try what i can later (too hot in that room, poor air circulation from the ac in that room with my desktop) when it cools down. And ill update how it goes. 
183308202021

Why would it end your save? Don't update your game to the new version, or did you mod your steam install?? If you did try seeing if you can't an older version downloaded, IDK if on steam if they have older versions in the "betas" section.

Link to comment
Share on other sites
NathanKell

NathanKell

Posted
Posted

If you are playing in sandbox, enable "Enabled All Part Upgrades in Sandbox" in your difficulty settings. PF diameter limits are set via upgrades, and for some reason Squad defaults to leaving that option defaulted to off in difficulty settings, meaning your diameters are locked in sandbox.

Link to comment
Share on other sites
darthgently

darthgently

Posted
Posted (edited)
On 8/26/2021 at 12:50 PM, Wurmi said:

Hello,

I got a strange bug that do not let me put any struts anymore. After using the Fairing base i can not put any struts anymore in the underlying parts.

This is a stock 1.12 install with only this mod installed. i made a Video so you can see it easier what i mean. https://streamable.com/v6m9tp

If you are able to place the first end of the strut, but not the second end, this trick might work for you (it has worked for me in the editor for a similar strut glitch).  Press your MOD key (typically Alt on Windows, R-Shift on Linux) while you click when placing the second end.  This will copy  it as you place it as a side effect.  This may not work in your case, but hope it helps.  Given your video, I think it will help.  And I'm betting your KSP.log is getting spammed with Null References once the glitch starts also

I should add that I don't think this glitch is specific to this mod.  I've seen NERV engines being part of the craft causing the same, or similar, issue.  And maybe Procedural Parts.  But I think that is just correlation with something in KSP that particular parts trigger

Edited by darthgently
Link to comment
Share on other sites
  • 4 weeks later...
Nicodo123

Nicodo123

Posted
Posted (edited)

I have textures unlimited installed, but the recoloring gui button won't show up in the fairing options. Any idea what's going on?

 

EDIT: Nevermind, I was just using an older version of procedural fairings (so much for ckan auto-update...)

Edited by Nicodo123
Link to comment
Share on other sites
  • 2 weeks later...
Matuchkin

Matuchkin

Posted
Posted

I have installed Procedural Fairings for 1.10.x, from CKAN, with RO.

It appears that the fairing bases have now been adjusted to limit themselves to the diameter of what they were attached to, with the user unable to increase their diameter further. This renders it impossible to use the mod. I hope this issue can be fixed soon.

Link to comment
Share on other sites
siimav

siimav

Posted
Posted
16 minutes ago, Matuchkin said:

I have installed Procedural Fairings for 1.10.x, from CKAN, with RO.

It appears that the fairing bases have now been adjusted to limit themselves to the diameter of what they were attached to, with the user unable to increase their diameter further. This renders it impossible to use the mod. I hope this issue can be fixed soon.

Please refer to https://github.com/KSP-RO/ProceduralFairings/issues/30#issuecomment-877918419

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing
×
×
  • Create New...