linuxgurugamer Posted August 10, 2019 Author Share Posted August 10, 2019 Just now, zer0Kerbal said: short range operation yes, but a tug for intrasolar operation? say from Kerbin to Mun? or further. Am currently too busy to do such, but just thoughts. Then it's not for this. This is a utility vehicle, for short range operations, IMHO I am open to discussion about this Quote Link to comment Share on other sites More sharing options...
zer0Kerbal Posted August 10, 2019 Share Posted August 10, 2019 2 minutes ago, linuxgurugamer said: Then it's not for this. This is a utility vehicle, for short range operations, IMHO I am open to discussion about this as am I - not a high priority, maybe if requested (allot) will do - found a great little mod that allows for 4 or more modes on a single engine - but that is for the possible future. Quote Link to comment Share on other sites More sharing options...
linuxgurugamer Posted August 10, 2019 Author Share Posted August 10, 2019 On 8/8/2019 at 9:36 PM, Targus said: It's a 1.0 hyper engine from hyper drive mod https://www.curseforge.com/kerbal/ksp-mods/hyper-drive made by @Exodus_Solis Interesting. I just took a look at that mod. It's listed on Curse a public domain, but he claims that these are all stock which he's modified. Unfortunately, I believe the mod consists of copyrighted Squad part files and slightly modified Quote Link to comment Share on other sites More sharing options...
FreeThinker Posted August 10, 2019 Share Posted August 10, 2019 @zer0Kerbal I created a pull request with the fix for KSPIE compatibility Quote Link to comment Share on other sites More sharing options...
zer0Kerbal Posted August 11, 2019 Share Posted August 11, 2019 4 hours ago, FreeThinker said: @zer0Kerbal I created a pull request with the fix for KSPIE compatibility That looks like it took some effort and time, thank you. Quote Link to comment Share on other sites More sharing options...
linuxgurugamer Posted August 11, 2019 Author Share Posted August 11, 2019 On 8/4/2019 at 10:52 PM, kerbalx75 said: could you continue my mod Kerbal Traits I could, but other than it being a MM config, and having a class which makes no sense (Ranger), what sort of support do you expect it to need? 5 hours ago, FreeThinker said: @zer0Kerbal I created a pull request with the fix for KSPIE compatibility I'm glad I saw this. @FreeThinker Next time, please ping me as well, otherwise email can get lost Quote Link to comment Share on other sites More sharing options...
madindehead Posted August 11, 2019 Share Posted August 11, 2019 This looks really interesting. Going to keep an eye on this! The only annoyance...the textures I'm very picky with things looking stockalike Ah well. I can live with it I'm sure! Quote Link to comment Share on other sites More sharing options...
linuxgurugamer Posted August 11, 2019 Author Share Posted August 11, 2019 (edited) 3 hours ago, madindehead said: This looks really interesting. Going to keep an eye on this! The only annoyance...the textures I'm very picky with things looking stockalike Ah well. I can live with it I'm sure! Stock alike colors are for rockets, planes, etc. this is a construction vehicle, makes sense for it to be yellow, easier to see, etc. that being said, if someone were to reskin it in stockalike colors, I’d be willing to include them as a varient. At this point, I thing the colors would need to match the new stock colors, not the old ones 16 hours ago, FreeThinker said: @zer0Kerbal I created a pull request with the fix for KSPIE compatibility I’ll do a release of this later today. See the first part of this message above, wondering if you would be interested? Edited August 11, 2019 by linuxgurugamer Quote Link to comment Share on other sites More sharing options...
FreeThinker Posted August 11, 2019 Share Posted August 11, 2019 (edited) 1 hour ago, linuxgurugamer said: Stock alike colors are for rockets, planes, etc. this is a construction vehicle, makes sense for it to be yellow, easier to see, etc. that being said, if someone were to reskin it in stockalike colors, I’d be willing to include them as a varient. At this point, I thing the colors would need to match the new stock colors, not the old ones See the first part of this message above, wondering if you would be interested? Retexturing is not my thing, but perhaps @silversliver is intrested in doing retexture job? Edited August 11, 2019 by FreeThinker Quote Link to comment Share on other sites More sharing options...
linuxgurugamer Posted August 11, 2019 Author Share Posted August 11, 2019 New release, 1.3.0.7 Thanks to forum user @FreeThinker for this Fixed compatibility with KSPIE Quote Link to comment Share on other sites More sharing options...
Targus Posted August 12, 2019 Share Posted August 12, 2019 (edited) @linuxgurugamer @FreeThinker @zer0Kerbal Thanks for your efforts Edited August 12, 2019 by Targus Quote Link to comment Share on other sites More sharing options...
linuxgurugamer Posted August 14, 2019 Author Share Posted August 14, 2019 New release, 1.3.0.8 Correct MP thrust from 36 to 26 Remove extranious brace in changelog Correct from runningLFO to runningLF in KSPi engine version Update OrbitalTugPod.cfg Quote Link to comment Share on other sites More sharing options...
linuxgurugamer Posted September 24, 2019 Author Share Posted September 24, 2019 New release, 1.3.0.9 Update OrbitalTugPod.cfg small fixes Put full license text into License.md Quote Link to comment Share on other sites More sharing options...
Syrius Posted September 25, 2019 Share Posted September 25, 2019 Linux, Quick question, I noticed there are RCS on the tugs grappler body however they do not appear to be operational. I have also right clicked on the part outside the VAB to see if they needed to be activated but there does not appear to be an option. Am I missing anything? Syrius Quote Link to comment Share on other sites More sharing options...
zer0Kerbal Posted September 25, 2019 Share Posted September 25, 2019 (edited) 16 hours ago, Syrius said: Linux, Quick question, I noticed there are RCS on the tugs grappler body however they do not appear to be operational. I have also right clicked on the part outside the VAB to see if they needed to be activated but there does not appear to be an option. Am I missing anything? Syrius do you mean the core? (the part with all the fuel, and 4 grappler arms) if so - it has a thruster power of 15 (internally scaled to 10%) using ModuleRCSFX. have you turned on RCS while in flight? Edited September 25, 2019 by zer0Kerbal Quote Link to comment Share on other sites More sharing options...
Syrius Posted September 26, 2019 Share Posted September 26, 2019 2 hours ago, zer0Kerbal said: do you mean the core? (the part with all the fuel, and 4 grappler arms) if so - it has a thruster power of 15 (internally scaled to 10%) using ModuleRCSFX. have you turned on RCS while in flight? Yes that would be the part and yes I have. As a matter of fact the craft was using the RCS on the crew module (from a different mod) just fine but those on the tug were non-op. I will see if I can get some more information as it seems to be working for you, yes? Syrius Quote Link to comment Share on other sites More sharing options...
zer0Kerbal Posted September 26, 2019 Share Posted September 26, 2019 1 hour ago, Syrius said: Yes that would be the part and yes I have. As a matter of fact the craft was using the RCS on the crew module (from a different mod) just fine but those on the tug were non-op. I will see if I can get some more information as it seems to be working for you, yes? Syrius just tried it. works. reason you might not be seeing effects is that by default the RCS is turned down to 10% - try using the RMB/PAW to turn up the RCS - and you should see the effects. Quote Link to comment Share on other sites More sharing options...
linuxgurugamer Posted December 2, 2019 Author Share Posted December 2, 2019 New release, 1.3.1 Updated all DDS to DXT5 format Updated to KSP 1.8 Quote Link to comment Share on other sites More sharing options...
Dep_Opt Posted December 5, 2019 Share Posted December 5, 2019 (edited) Slight issue; Installed via CKAN, textures aren't loading for any part save the cockpit. B9 part switch says it can't find them on load. What have I done wrong? EDIT: Manual install from Spacedock worked fine. Missing texture files in the version listed on CKAN? Edited December 5, 2019 by Dep_Opt update Quote Link to comment Share on other sites More sharing options...
LTQ90 Posted December 5, 2019 Share Posted December 5, 2019 1 hour ago, Dep_Opt said: Slight issue; Installed via CKAN, textures aren't loading for any part save the cockpit. B9 part switch says it can't find them on load. What have I done wrong? EDIT: Manual install from Spacedock worked fine. Missing texture files in the version listed on CKAN? hi, i don t think so, i installed this mod few days ago via ckan and all was fine. Quote Link to comment Share on other sites More sharing options...
linuxgurugamer Posted December 5, 2019 Author Share Posted December 5, 2019 1 hour ago, Dep_Opt said: Slight issue; Installed via CKAN, textures aren't loading for any part save the cockpit. B9 part switch says it can't find them on load. What have I done wrong? EDIT: Manual install from Spacedock worked fine. Missing texture files in the version listed on CKAN? Sounds like you got it before the textures were updated. Refresh it and try again Quote Link to comment Share on other sites More sharing options...
RainDreamer Posted April 10, 2020 Share Posted April 10, 2020 (edited) Digging up this old thread here for a question: The antenna doesn't work with remote tech for some reason. Any one know a reason why? Edited April 10, 2020 by RainDreamer Quote Link to comment Share on other sites More sharing options...
zer0Kerbal Posted April 10, 2020 Share Posted April 10, 2020 (edited) 3 hours ago, RainDreamer said: Digging up this old thread here for a question: The antenna doesn't work with remote tech for some reason. Any one know a reason why? neither @linuxgurugamer or myself play with RemoteTech (IIRC). So neither one of us (or anybody else it seems, until now) have tested the patch that is there. Shocking I know. SO if you want to supply the fix (or anybody), I am confident that @linuxgurugamer will include it in this mod. Edited April 10, 2020 by zer0Kerbal Quote Link to comment Share on other sites More sharing options...
RainDreamer Posted April 10, 2020 Share Posted April 10, 2020 3 hours ago, zer0Kerbal said: neither @linuxgurugamer or myself play with RemoteTech (IIRC). So neither one of us (or anybody else it seems, until now) have tested the patch that is there. Shocking I know. SO if you want to supply the fix (or anybody), I am confident that @linuxgurugamer will include it in this mod. I actually wrote a patch that somehow works despite basically being a copy of your patch, so it was weird... and might be just interaction with some other mods and/or load order. That said I have been trying to remove the antenna model you added for the drone pod (why disable the super useful service bay for the antenna when you have a separate antenna part already?) to no avail. I am not that good with MM patch and I haven't dare touch the main RT patch in the mod since it is managed by CKAN, so I have been writing a patch for a patch lol. I will now try messing a little bit with the MM patch you have and see if it somehow works and let you know. Quote Link to comment Share on other sites More sharing options...
RainDreamer Posted April 11, 2020 Share Posted April 11, 2020 (edited) @linuxgurugamer & @zer0Kerbal So I rewrote the MM patch for Remote Tech, restoring the service bay to the drone pod while removing the antenna & giving it passive antenna of 1Mm, also included the drone antenna part in the patch as that has been missing (which is why it didn't work). Module Data Transmitter also have to be removed apparently, and module SPU should be SPU passive (I have no idea why since I copy from another remote tech patch, but it works). //DronePod @PART[DronePod]:NEEDS[RemoteTech]:FOR[OrbitalTug] { !MODULE[ModuleDataTransmitter] {} %MODULE[ModuleSPUPassive] {} %MODULE[ModuleRTAntennaPassive] { %OmniRange = 1000000 %TRANSMITTER { %PacketInterval = 0.3 %PacketSize = 2 %PacketResourceCost = 15.0 } } } ////////////////////////////////////////////////////// //DroneAntenna @PART[droneAntenna]:FOR[OrbitalTug]:NEEDS[RemoteTech] { !MODULE[ModuleDataTransmitter] {} %MODULE[ModuleRTAntenna] { %Mode0DishRange = 0 %Mode1DishRange = 90000000 %EnergyCost = 0.82 %DishAngle = 25.0 %TRANSMITTER { %PacketInterval = 0.2 %PacketSize = 2 %PacketResourceCost = 12.0 } } %MODULE[ModuleSPUPassive] {} } ///////////////////////////////////////////////////// //demolitionDroneKIS,impactDrone @PART[helperDrone,demolitionDroneTAC,demolitionDroneKIS]:NEEDS[RemoteTech]:FOR[OrbitalTug] { !MODULE[ModuleDataTransmitter] {} %MODULE[ModuleSPUPassive] {} %MODULE[ModuleRTAntennaPassive] { %OmniRange = 500000 %TRANSMITTER { %PacketInterval = 0.15 %PacketSize = 2 %PacketResourceCost = 12.0 } } } Also off topic, but you guys think you can make a stand alone carrier module without the push tug? That is way more than what I can do. Edited April 11, 2020 by RainDreamer Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.