Jump to content

[1.12.x] Artemis Construction Kit | Stockalike Orion & SLS | v1.4.0 | (Lockheed lander!)


benjee10

Recommended Posts

On 2/22/2024 at 6:08 AM, Aion said:

Hi, where can I find the configuration under RO?

Here you go: https://github.com/SkyPhoenix999/Artemis-Construction-Kit-RO-Configs

The description says there's no support for RP1, but I've found that there is some basic support for it, at least when it comes to avionics. This person also has some configs for other mods for RO/RP1 with varying degrees of completeness/support.

Link to comment
Share on other sites

  • 4 weeks later...
  • 1 month later...
On 5/3/2024 at 11:43 AM, United Kerbol Alliance said:

where is the RO config for this Mod?

This mod isn`t made for RO. If you want RO-configs then ask in the RO-Thread.

Link to comment
Share on other sites

On 3/29/2024 at 7:12 PM, LoadingTimeExpert said:

Also the orion capsule decoupler doesn't seem to work as an actual decoupler

Late reply but check you have animated decouplers installed, as otherwise the decoupler won't fire. 

Link to comment
Share on other sites

7 hours ago, benjee10 said:

Late reply but check you have animated decouplers installed, as otherwise the decoupler won't fire. 

Yes, that was the issue. I thought I had it installed, but it turns out that it was missing for some reason. It's fine now

Link to comment
Share on other sites

2 hours ago, LoadingTimeExpert said:

Yes, that was the issue. I thought I had it installed, but it turns out that it was missing for some reason. It's fine now

easy mistake to make.

Link to comment
Share on other sites

On 8/28/2022 at 6:24 PM, benjee10 said:

gO9FScC.png

Artemis Construction Kit | V1.4.0 | Stockalike Orion Spacecraft & Space Launch System

Qhqi4i6.jpeg

dp3d3iI.png

Artemis Construction Kit contains parts inspired by NASA's Artemis program, specifically the Orion Spacecraft and Space Launch System Block 1, 1B & 2, as well as lunar lander parts based on the Lockheed single-stage lander proposal. 

GFRB53S.jpeg

Key features:

  • Highly detailed recreation of the Orion capsule & service module in a Kerbalized style
  • Space Launch System Core Stage, ICPS (courtesy of Bluedog Design Bureau), Boosters (courtesy of Photon Corp) & Main Engines (courtesy of Rocket Motor Menagerie) 
  • Exploration Upper Stage & other SLS Block 1B parts
  • SLS Block 2 advanced boosters (BOLE)
  • Modular abort system, including boost cover, abort motor, jettison motor and solid-fuelled attitude motor
  • Lockheed lander-inspired Kerbal Landing System
  • Full capsule interior
  • Highly customisable, including multiple colour variants for the capsule and length variants for service module
  • Adjustable sweep solar arrays with built-in 'selfie' cameras (requires Breaking Ground DLC)
  • Waterfall support
  • Neptune Camera support
  • Craft files provided
  • Adapters to standard sizes (2.5m, 3.125m and 3.75m)

5LRocZo.jpeg

qmHeF6Q.pngrj02ZD0.png

Capsule available in white, black and reflective silver foil variants

bBuwI3e.jpeg

Variable sweep solar arrays

sTqPAHh.jpeg

Fully functional Abort system with waterfall plumes

EQyPTRy.png

pFjDuaA.jpeg

Custom drogue and main parachutes - available both as combined parts to fit the capsule, and standalone parts for your own creations. Translucent shaders provided by Shaddy

gi2I94o.jpeg

ddrQZzb.jpeg

Detailed custom IVA

Download:

SPACEDOCK
Secondary Download (GitHub)

Dependencies:

This mod has B9PartSwitch, Animated Decouplers, DeployableEngines, Community Resource Pack, Simple Adjustable Fairings and ModuleManager as dependencies, all of which are bundled with the mod. My mods Benjee10 Shared Assets and HabTechProps are also bundled - these contain the parts for the docking port/OMS engine and props for the IVA respectively.

Waterfall is fully supported, so if you have this installed you will get much nicer plumes all engines/RCS parts included! Configs were created by Rodg88 - the abort motor FX are particularly spectacular!

Shaddy and Shabby will give the parachutes much more realistic translucent shaders. 

Compatability:

While this mod is designed for KSP 1.12.3, it should be backwards compatible with previous versions, though I will not be providing official support for any issues prior to 1.12. If you are using a previous KSP version you will need to find version-appropriate downloads of the required dependencies. 

This mod uses parts from other mods, namely Bluedog Design Bureau, Photon Corp, and Rocket Motor Menagerie. If any of these mods are installed a MM patch will ensure compatibility and prevent conflicts. You can safely install and uninstall any of these mods, as well as pruning parts of this mod out. 

Recommended mods:

Conformal Decals for slapping that giant red worm logo down the side for some reason

NpwABoI.jpeg

GMt07Zh.png

Ow2zlCf.jpeg

pEW9eHS.png

^ amazing screenshots by @Pioneer_Steve - thank you <3 

Future plans:

TBC

Credits:

  • Orion Spacecraft by Benjee10
  • SLS core stage & EUS by DylanSemrau & Benjee10
  • ICPS & RL-10 engine by CobaltWolf & Zorg
  • RS-25 Main Engine by EStreetRockets
  • Waterfall configs by Rodg88
  • Additional mesh work by InvaderChaos
  • Community Category Kit implementation by Lennon

 

 

 

All rights reserved. Dependencies bundled under their respective licenses. 

i need help building the fairing

Link to comment
Share on other sites

6 hours ago, tobynfighter said:

i need help building the fairing

Welcome to the forums (!), could you describe specifically what you need help with in regards to the fairing?

Any screenshots would be helpful as well

Link to comment
Share on other sites

15 hours ago, KeaKaka said:

Welcome to the forums (!), could you describe specifically what you need help with in regards to the fairing?

Any screenshots would be helpful as well

im sorry, i thought i had to manually make the fairing not place those 3 fairing pieces

 

Link to comment
Share on other sites

  • 4 weeks later...
  • 3 weeks later...

there any way to get this to work with real fuels? currently at least the cryogenic second stages doesnt seem to have the configured module to allow it to work with real fuels so it cant actually store the right fuels for the engines

Link to comment
Share on other sites

7 hours ago, Madeline said:

there any way to get this to work with real fuels? currently at least the cryogenic second stages doesnt seem to have the configured module to allow it to work with real fuels so it cant actually store the right fuels for the engines

thats why the mod Community resource pack is a dependency

 

or if your using RO theres RO configs link

Link to comment
Share on other sites

15 hours ago, Madeline said:

there any way to get this to work with real fuels? currently at least the cryogenic second stages doesnt seem to have the configured module to allow it to work with real fuels so it cant actually store the right fuels for the engines

You can use CryoTanks for cryogenic second stage.

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...