HafCoJoe Posted March 22, 2019 Share Posted March 22, 2019 (edited) no matter what I change, I can't seem to get rid of this intense extinction on my Duna glow: I'll keep things updated. If anyone has any suggestions I'd love to hear 'em. Its been here ever since I released Spectra, but I've been able to mask it pretty well so far. I'm also having difficulty determining what settings changed to what, the GitHub page isn't clear (or maybe I'm viewing the wrong page, I'm not sure) Edited March 22, 2019 by Avera9eJoe Quote Link to comment Share on other sites More sharing options...
Galileo Posted March 22, 2019 Share Posted March 22, 2019 (edited) 14 hours ago, Dafni said: Snip 15 hours ago, blackrack said: Snip I went ahead and created an issue regarding the sun flare stuff Edited March 22, 2019 by Galileo Quote Link to comment Share on other sites More sharing options...
Brigadier Posted March 22, 2019 Share Posted March 22, 2019 KSP v1.6.1, Scatterer v0.0540, GPP v1.6.3.1 + GEP, no SVE, SVT or Spectra. Firstly @blackrackand @Galileo, thanks for all the work you put into your respective mods. Secondly, I'm getting the black cloud effect with the new version of Scatterer and was wondering if it's expected to be compatible with GPP? Quote Link to comment Share on other sites More sharing options...
Galileo Posted March 22, 2019 Share Posted March 22, 2019 (edited) 18 minutes ago, Brigadier said: KSP v1.6.1, Scatterer v0.0540, GPP v1.6.3.1 + GEP, no SVE, SVT or Spectra. Firstly @blackrackand @Galileo, thanks for all the work you put into your respective mods. Secondly, I'm getting the black cloud effect with the new version of Scatterer and was wondering if it's expected to be compatible with GPP? It’s definitely not compatible with GPP yet. I have not released GPP, but the cfgs are updated on GPPs end and will be good to go upon release Edited March 22, 2019 by Galileo Quote Link to comment Share on other sites More sharing options...
Brigadier Posted March 22, 2019 Share Posted March 22, 2019 Just now, Galileo said: It’s definitely not compatible with GPP yet. I have not released GPP, but the cfgs are updated. Oh, good, I thought it was just me. Thanks for the update and I look forward to its eventual update. GPP is an amazing visual experience. Quote Link to comment Share on other sites More sharing options...
blackrack Posted March 22, 2019 Author Share Posted March 22, 2019 7 hours ago, Avera9eJoe said: no matter what I change, I can't seem to get rid of this intense extinction on my Duna glow: I'll keep things updated. If anyone has any suggestions I'd love to hear 'em. Its been here ever since I released Spectra, but I've been able to mask it pretty well so far. I'm also having difficulty determining what settings changed to what, the GitHub page isn't clear (or maybe I'm viewing the wrong page, I'm not sure) Sorry, what is the exact issue here with the extinction? Quote Link to comment Share on other sites More sharing options...
Poodmund Posted March 22, 2019 Share Posted March 22, 2019 I think its because he is trying to edit the values for config node 0 which is at 1km altitude. Quote Link to comment Share on other sites More sharing options...
HafCoJoe Posted March 22, 2019 Share Posted March 22, 2019 8 hours ago, blackrack said: Sorry, what is the exact issue here with the extinction? The issue is with EVE Integration on a 2d layer, something is causing the edge to not fade out- I ended up removing my Scatterer configs for Duna in the meantime, and use my stock EVE atmosphere effects I've been unable to recreate the Duna I had in my original release: Quote Link to comment Share on other sites More sharing options...
blackrack Posted March 22, 2019 Author Share Posted March 22, 2019 1 hour ago, Avera9eJoe said: The issue is with EVE Integration on a 2d layer, something is causing the edge to not fade out- I ended up removing my Scatterer configs for Duna in the meantime, and use my stock EVE atmosphere effects I've been unable to recreate the Duna I had in my original release: I can see it now, I was on my phone earlier and it darkens everything. Can you try with flatScaledSpaceModel=true in the planetsList? Quote Link to comment Share on other sites More sharing options...
HafCoJoe Posted March 23, 2019 Share Posted March 23, 2019 4 hours ago, blackrack said: I can see it now, I was on my phone earlier and it darkens everything. Can you try with flatScaledSpaceModel=true in the planetsList? I'll give it a go when I get home Quote Link to comment Share on other sites More sharing options...
Likasombodee Posted March 23, 2019 Share Posted March 23, 2019 Does anyone know what's needed for RSS scatterrer with clouds? I've been scrolling the forum and the internet and I am just confused now. XD Quote Link to comment Share on other sites More sharing options...
Capt. Hunt Posted March 25, 2019 Share Posted March 25, 2019 (edited) A few pages ago someone posted about a white sky bug. It might not be the same thing, but something similar just happened to me. I opened the payload bay on my KSO shuttle and the universe turned white. I've opened and closed those bay doors multiple times today before it happened, so IDK if that's the cause. I also haven't installed anything new today that might have done it. Here's my mods: https://www.dropbox.com/s/v8smaj5v9l7qgba/KSP Mods32519.jpg?dl=0 which log file are we using now? It's been a while since I've had to report something like this. Edit: The problem seems to have corrected itself the next time I loaded the game. Edited March 25, 2019 by Capt. Hunt Quote Link to comment Share on other sites More sharing options...
Dafni Posted March 27, 2019 Share Posted March 27, 2019 On 3/22/2019 at 3:19 AM, Galileo said: I went ahead and created an issue regarding the sun flare stuff Thank you very much. Do you think this is an issue that Flare Replacer could work around, or rather something that requires an update to Scatterer? Just curious. Either way, many thanks for your help, it is greatly appreciated. Quote Link to comment Share on other sites More sharing options...
Galileo Posted March 27, 2019 Share Posted March 27, 2019 8 hours ago, Dafni said: Thank you very much. Do you think this is an issue that Flare Replacer could work around, or rather something that requires an update to Scatterer? Just curious. Either way, many thanks for your help, it is greatly appreciated. I tried everything I can. I have not had time to follow up on my initial issue report on github, but I will Friday for sure. Quote Link to comment Share on other sites More sharing options...
Dafni Posted March 28, 2019 Share Posted March 28, 2019 7 hours ago, Galileo said: I tried everything I can. I have not had time to follow up on my initial issue report on github, but I will Friday for sure. Thank you. Appreciate it. Those flares are still the best ones around IMO. Quote Link to comment Share on other sites More sharing options...
lajoswinkler Posted March 28, 2019 Share Posted March 28, 2019 I've downloaded the latest version and even though I see some weird clipping effects when flying an airplane and looking down into Kerbin, I also see improved performance and the whole thing looks a lot better, especially the horizon. Really great work. Quote Link to comment Share on other sites More sharing options...
evileye.x Posted March 30, 2019 Share Posted March 30, 2019 (edited) On 3/15/2019 at 5:38 PM, Phineas Freak said: If you mean the missing sphere edge then it has absolutely nothing to do with Scatterer (hint: the "camera01" far clip value must be increased). This seems not to be the case. I tried to push that value up with RSS plug in and config provided by you, but it doesn't help. I think the problem with scatterer's draw distance in non scaled space. Because I have no such artifacts in KSP 1.3/1.3.1 with Scatterer 0.0275 and 6.4x rescale. 0.275 was last version before 0.0300 - since than Scattere became less friendly to rescaled Kerbin. You can clearly see that planet surface is not clipped, but the scatterer effect is not drawn, something limiting (config or hardcoded limit?) it's range https://photos.app.goo.gl/oKF67EnAkRPPeMjm8 more of those: https://photos.app.goo.gl/ibTkrjipumj9hWSu6 Hello @blackrack ! You are my only hope to upgrade my KSP install from 1.3 / 1.3.1 The only thing that stops me from doing so - scatterer. I cannot live without it, and with scatterer... Each ascent to orbit is breathtaking. Literally never gets old. Also I've pushed up a little bit size of len's flare to make that blinding, hardlight effect - like this And 6.4x rescale. Once I tried more or less proper scaling, I just don't want to go back to building tiny toy rockets pushing tons of payloads to orbit of tiny, tiny Kerbin. O'k those are actually two things. But together it's gorgeous. Just look at those screenshots (more than 500 photos): https://photos.app.goo.gl/Wuv3yeAHzdGDq8P17 There's was a little bit of aliasing on atmosphere edge, but then I added quite soft KS3P config on top of it - with additional antialiasing and some blur - 0.0275 looks amazing... Spoiler Last photo without KS3P, but it looks gorgeous still. Atmoshere is 100 km exactly and no major artifacts in low (80-160 km) orbits. After 160 km scaled space kicks in and everything is perfect. Unfortunately post 1.3.1 versions are different story... So, @blackrack, what I'm trying to say - You have done outstanding job already, but I want to kindly ask you for all rescale fans here - may be something can be done to make things look like the did back in 0.0275? If 0.0275 can be straight ported to 1.6.1 - I'll be happy already. But if you can make adjustments in 0.0540 or expose some configs to solve the problem with scaled worlds - it will be wonderful, more than I can dream of. I can provide you with packed gamedata folder with assembled 6.4x recale for 1.6.1 - just fire up good old Kerbal X rocket - it's orbit capable even in 6.4x. Or I can test things for this noble cause. Thank you in advance. Edited March 30, 2019 by evileye.x Quote Link to comment Share on other sites More sharing options...
PyjackMeat Posted March 31, 2019 Share Posted March 31, 2019 How do I make the sunflare of another star, like Grannus, show up? It should show up as a bright star. And isn't to do with Distant Objects. Quote Link to comment Share on other sites More sharing options...
Glloyd Posted March 31, 2019 Share Posted March 31, 2019 (edited) Is this compatible with SVE? I've had black flickering over Kerbin's surface while in orbit, and I'm wondering if it's related to my SVE installation. It didn't show up before I installed Scatterer. EDIT: It seems to be just over the oceans. I also didn't have this issue last time I played, at the end of February, using both SVE and scatterer. EDIT Again: Re-enabling ocean shaders seemed to fix it. I messed with a few things, but I'm 95% sure that was it. Seems odd to have that as an option if it messes with things though. Edited March 31, 2019 by Glloyd Quote Link to comment Share on other sites More sharing options...
baddzse233 Posted March 31, 2019 Share Posted March 31, 2019 (edited) Why does my Eve have no waves? Edited March 31, 2019 by baddzse233 Quote Link to comment Share on other sites More sharing options...
DeltaDizzy Posted April 2, 2019 Share Posted April 2, 2019 This isnt an issue. but merely some appreciation... Scatterer is one of my definite must-haves, and I hope it sticks around for at least as long as KSP does. Quote Link to comment Share on other sites More sharing options...
PyjackMeat Posted April 2, 2019 Share Posted April 2, 2019 Anyone? Quote Link to comment Share on other sites More sharing options...
Vasya_Pupkin Posted April 2, 2019 Share Posted April 2, 2019 Hello, for some reason I have such a glitch with water, it appears when I fly at an altitude below 200 kilometers. Here is a link to the screenshot https://drive.google.com/file/d/1T2XHagDKsEbThuEv2LcAKqqmG40oKZBA/view?usp=sharing Quote Link to comment Share on other sites More sharing options...
Citizen247 Posted April 3, 2019 Share Posted April 3, 2019 The latest release looks great and is a big improvement on some of the issues of the previous release, thank you. I do have a minor bug to note though: I'm using a 10x rescaled Kerbin, between 80-160km in altitude there's the scatterer horizon doesn't cover the planet in the far distance. Also, the craft itself starts to get increasingly tinted: Below 80km everything looks fine, above it's all good as well: I'm using a whole mix of configs I've built up over the years, so if this is a config issue I can deal with it. I'm just not sure what configs I should be looking at? Quote Link to comment Share on other sites More sharing options...
BadOaks Posted April 4, 2019 Share Posted April 4, 2019 (edited) @blackrack I love the look of the new version, and really appreciate all the hard work you've put into this mod. There are two issues that I found, the first is the same kind of black patches on the horizon that @evileye.x and @Citizen247 reported with rescaled systems. This is a 3.2x rescale on a clean install with only scatterer and the mods needed for rescaling (Kopernicus/Sigma/Rescale etc.). Some things I noticed: Judging from the others' screenshots, it gets progressively worse with larger rescales. It is most noticeable in spots where mountains are on the horizon, and less in flat areas. It looks like it occurs around or in front of the outlines of mountains where they protrude above the spherical horizon. Also most noticeable at high altitude just before the transition to scaled space. I don't see it once in scaled space. The second issue I found is hopefully simpler, which is that changes to 'Post Processing Alpha' aren't reflected in scaled space. To reproduce: Put a craft in LKO. Alt-F11 and set Post Processing Alpha to 2. Zoom out with the camera until it transitions to scaled space. You should see a hard transition where the appearance of Kerbin's atmosphere changes back to what it would be if Post Processing Alpha were equal to 1. Here's the transition: Edited April 4, 2019 by BadOaks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.