Jump to content

ASET Props Pack. v1.5 (for the modders who create IVA)


alexustas

Recommended Posts

  On 2/10/2017 at 3:00 PM, xv323 said:

 

@MOARdV

Here's the log file as you requested.

 

Expand  

It looks like the crash is happening during RPM prop configuration.  I will need to take a look here to see if I can figure out what is going on - there are a couple of unknowns that I can't get to without making source code changes.

Link to comment
Share on other sites

  On 2/12/2017 at 2:13 PM, MOARdV said:

It looks like the crash is happening during RPM prop configuration.  I will need to take a look here to see if I can figure out what is going on - there are a couple of unknowns that I can't get to without making source code changes.

Expand  

Thanks. If you need anything further from me at any point as you look into this, ping me a message and I'll do my best.

Link to comment
Share on other sites

So I'm not entirely sure if this is the right place to ask this. If not, just let me know and I can delete it and take my stuff to the right place.

I'm having an issue show up with CKAN when trying to install this:

  Reveal hidden contents

I'm a little too dumb to know what any of this means. Only seems to be hitting this mod.

Link to comment
Share on other sites

Hello Alex. Thank you for your great work. The new props are looking great and i am really looking forward to using them.
I am having the same problem that @xv323 and @MOARdV were discussing above. I use your props on my mods and the problem appeared when i tried to update the props on my Gemini Mod.
Tried to narrow it down but the game crashes even with only RPM/ModuleManager/Aset Props and Mk1_Lander_Can_IVA_Replacement installed.

I go to the VAB, select the Mk1 Lander Can, add no further parts and click launch. The game starts loading and crashes before getting to the launchpad.

@MOARdV i uploaded my log file too in case it helps https://we.tl/nppuC4iK0L
Let me know if you need anything else.
I'm on KSP version 1.2.2, and Mac OSX 10.10.5.
Hope this helps in narrowing down the issue. And again thank you both for your work.

Edited by silentvelcro
Link to comment
Share on other sites

  On 2/18/2017 at 8:15 PM, xv323 said:

@alexustas @MOARdV any news on a fix for this issue?

Expand  

Sorry.  I've been thoroughly busy on other projects, so I have not had the chance to investigate.  It appears to be limited to some Mac / Linux configurations (unless I missed a report on a Windows installation seeing it), but I don't know what aspect of that is relevant, if anything.  It may be smaller vidmem on those particular machines, plus a less-than-graceful handling of out-of-memory; it may be bad handling of some of the textures that are reporting errors at load time; it may be something else.

Link to comment
Share on other sites

@alexustas @MOARdV Sorry if this is duplicated in anyone else's KSP.log that may have been linked earlier...

I'm getting loading errs for some of the MFD screens...
Most of them are from odd-sized .dds textures, which also seem to have duplicate .pngs packaged with them... ??

Am I correct in assuming when a texture is duplicated, but as different file types, KSP will load the FIRST file type it comes across, based on alphabetical order?

Because when I delete the offending .dds's, the .png's seem to then load error-free...

Here's the relevant log snippet I'm getting:
 

  Reveal hidden contents


I also seem to be getting a couple errors for a missing texture, as well:

[INFO] [GameDatabase+<LoadObjects>c__Iterator4A.MoveNext] Load(Model): ASET/ASET_Props/Misc/Primitives/Primitive_TRIANGLE_90
[ERROR] [PartReader.ReadTextures] Texture 'ASET/ASET_Props/Misc/Primitives/PrimitiveDiffuse' not found!

[INFO] [GameDatabase+<LoadObjects>c__Iterator4A.MoveNext] Load(Model): ASET/ASET_Props/Misc/Primitives/Primitive_TRIANGLE_90_Beveled
[ERROR] [PartReader.ReadTextures] Texture 'ASET/ASET_Props/Misc/Primitives/PrimitiveDiffuse' not found!

 

Edited by Stone Blue
Link to comment
Share on other sites

  On 2/20/2017 at 9:52 PM, Stone Blue said:

@alexustas @MOARdV Sorry if this is duplicated in anyone else's KSP.log that may have been linked earlier...

I'm getting loading errs for some of the MFD screens...
Most of them are from odd-sized .dds textures, which also seem to have duplicate .pngs packaged with them... ??

Am I correct in assuming when a texture is duplicated, but as different file types, KSP will load the FIRST file type it comes across, based on alphabetical order?

 

Expand  

Sorry, I've been AFK(SP) for a while, so I didn't see this.

Yes, there are some bad textures in the package.  I don't know what went wrong with the DDS conversion on them, but it sounds like you've already found the fix (delete them).  I don't know how Unity/KSP decides to load them - it looks like they're alphabetical in the log, so that's most likely how it does that.  I'm not sure what alexustas plans to do with them (fix them / delete them) - I haven't communicated with him directly except for a couple of other RPM / ASET things for a while.

Link to comment
Share on other sites

Hey there, having some problems with what I can only assume to be either the ASET Props pack or the ASET Avionics pack. 

Currently, I cannot load the game with them in the mods folder, as I get stuck at this part:

http://sleekupload.com/uploads/5/stuck.png


I would gladly provide you a log file, but unfortunately after 20 minutes of loading the game has neither crashed nor loaded.

FYI I am crossposting this on the Avionics thread as well.

Link to comment
Share on other sites

  On 2/28/2017 at 2:27 PM, Dr. Eastwood said:

I would gladly provide you a log file, but unfortunately after 20 minutes of loading the game has neither crashed nor loaded.

Expand  

Doesn't matter. The log file is continuously written to disk and always available. Just get to the point where it freezes and go upload the log file.

Link to comment
Share on other sites

  On 2/28/2017 at 8:40 PM, luizopiloto said:

I'm trying to design a new IVA for the MK3 cockpit. I had to edit the MK3 internal model to place the console on a better position.
I'm doing it basically from scratch... Isn't there any info/tutorial on creating IVAs you can share?

qNFEop1.jpg

Expand  
 

I am not sure how up to date this tut is but try this

Link to comment
Share on other sites

 

  On 2/28/2017 at 8:40 PM, luizopiloto said:

 

qNFEop1.jpg

Expand  

I like the look of that, it could have some really good potential, and I hope you overcome your problem (I can't even get Unity and part tools to work, so I can't open any .mu files (if you could help, my version is 5.5.2))

Are you going to add the throttle quadrant from the avionics pack? It's not too spaceplane themed, but would go with this design, reminds me of the mk1 lander can.

Link to comment
Share on other sites

  On 2/28/2017 at 8:40 PM, luizopiloto said:

I'm trying to design a new IVA for the MK3 cockpit. I had to edit the MK3 internal model to place the console on a better position.
I'm doing it basically from scratch... Isn't there any info/tutorial on creating IVAs you can share?

qNFEop1.jpg

Expand  

you're my hero, luizo!

@alexustas, you are also my hero for releasing this update!

Edited by theonegalen
Link to comment
Share on other sites

Thanks for the Help guys. I've managed to resolve the problems on my custom MK3 IVA. It's almost finished... :P
Before:
CCN7I8s.jpg

 

After:

ZJ2uNQe.jpg

@alexustas I have a request, can you add "CurrentReferenceDockingPortCamera" to the ASET_CRT_Display cameras list?
Something like this:

BACKGROUNDHANDLER
{
    ...
    cameraTransform = ExtCam1|ExtCam2|ExtCam3|ExtCam4|ExtCam5|ExtCam6|ExtCam7|ExtCam8|CurrentReferenceDockingPortCamera
    ...
}

 

Link to comment
Share on other sites

  On 9/18/2015 at 12:22 PM, Pretender6 said:

At the lifesupport screen, is it possible to instead a Mission Active Time? to display the amount of time remaining with current lifesupport resources?

Expand  

No,  RPM  is not supported by TAC-LS

@xv323  @silentvelcro @Stone Blue

Remove existing "ASET Props" folder and put into "GAMEDATA/ASET/" this one:

https://www.dropbox.com/s/vh0p5bcbbfi15sm/ASET_Props-Dev1.4.1-09-03-2017.zip?dl=0

And tell me whether you managed to launch the flight

Link to comment
Share on other sites

  On 3/10/2017 at 9:49 AM, silentvelcro said:

@alexustas hello. Just tried it. The game still crashes as before. Do you need me to send you the new logfile?

Expand  

OK. I suggest you do the following experiment.

1. move the "Control" folder outside of the game folder. Delete KSP.log file. Start KSP and try to launch a capsule. Copy KSP.log file

2. move the "Instruments" folder outside of the game folder and put "Control" folder back into "ASET_Porps". Delete KSP.log file. Start KSP and try to launch a capsule. Copy KSP.log file

3. repeat the same steps with "MFD",  "Misc", "Sounds" and "SpaceFoodPack"

4. Give me all log files for situations where the game crash

 

Edited by alexustas
Link to comment
Share on other sites

Hi, I'm playing on version 1.2.2 and have just installed ASET props. I put it into my gamedata folder under the folder ASET. For some reason, while loading, the game gets stuck on KerbalScienceFoundation/NavInstruments/Props/prop/analog HSI

 

PartLoader: Compiling Internal Prop 'JSI/RPMPodPatches/BasicMFD/MFD40x20/RasterPropMonitorBasicMFD'
 
(Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/UnityEngineDebugBindings.gen.cpp Line: 42)
PartLoader: Compiling Internal Prop 'JSI/RPMPodPatches/BasicMFD/PlaneHUD/RasterPropMonitorBasicHUD'
 
(Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/UnityEngineDebugBindings.gen.cpp Line: 42)
PartLoader: Compiling Internal Prop 'KerbalScienceFoundation/NavInstruments/Props/prop/analogHSI'
 
(Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/UnityEngineDebugBindings.gen.cpp Line: 42)
ADDON BINDER: Cannot resolve assembly: KSPUtil, Culture=neutral, PublicKeyToken=null
 
(Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/UnityEngineDebugBindings.gen.cpp Line: 42)
ADDON BINDER: Cannot resolve assembly: KSPUtil, Culture=neutral, PublicKeyToken=null
 
(Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/UnityEngineDebugBindings.gen.cpp Line: 42)
FileNotFoundException: Could not load file or assembly 'KSPUtil, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies.
  at NavUtilLib.GlobalVariables.Settings.loadNavAids () [0x00000] in <filename unknown>:0
  at NavUtilLib.Analog.AnalogHSI.OnAwake () [0x00000] in <filename unknown>:0
  at InternalModule.Load (.ConfigNode node) [0x00000] in <filename unknown>:0
  at InternalProp.AddModule (.ConfigNode node) [0x00000] in <filename unknown>:0
  at InternalProp.Load (.ConfigNode node) [0x00000] in <filename unknown>:0
  at PartLoader.LoadInternalProp (.UrlConfig urlConf) [0x00000] in <filename unknown>:0
  at PartLoader+<CompileInternalProps>c__Iterator63.MoveNext () [0x00000] in <filename unknown>:0
  at UnityEngine.SetupCoroutine.InvokeMoveNext (IEnumerator enumerator, IntPtr returnValueAddress) [0x00000] in <filename unknown>:0
 
(Filename:  Line: -1)
 
Edited by tallon43
Link to comment
Share on other sites

@silentvelcro

Hmm ... I do not see anything suspicious

 

Can you please repeat the same workflow with this option?

and can you remove "LonesomeRobots" folder for more cleaner logs?

 

 

 

---------------------------------------------------------------------------

 

  On 3/11/2017 at 7:16 PM, tallon43 said:

Hi, I'm playing on version 1.2.2 and have just installed ASET props. I put it into my gamedata folder under the folder ASET. For some reason, while loading, the game gets stuck on KerbalScienceFoundation/NavInstruments/Props/prop/analog HSI

 

PartLoader: Compiling Internal Prop 'JSI/RPMPodPatches/BasicMFD/MFD40x20/RasterPropMonitorBasicMFD'
 
(Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/UnityEngineDebugBindings.gen.cpp Line: 42)
PartLoader: Compiling Internal Prop 'JSI/RPMPodPatches/BasicMFD/PlaneHUD/RasterPropMonitorBasicHUD'
 
(Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/UnityEngineDebugBindings.gen.cpp Line: 42)
PartLoader: Compiling Internal Prop 'KerbalScienceFoundation/NavInstruments/Props/prop/analogHSI'
 
(Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/UnityEngineDebugBindings.gen.cpp Line: 42)
ADDON BINDER: Cannot resolve assembly: KSPUtil, Culture=neutral, PublicKeyToken=null
 
(Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/UnityEngineDebugBindings.gen.cpp Line: 42)
ADDON BINDER: Cannot resolve assembly: KSPUtil, Culture=neutral, PublicKeyToken=null
 
(Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/UnityEngineDebugBindings.gen.cpp Line: 42)
FileNotFoundException: Could not load file or assembly 'KSPUtil, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies.
  at NavUtilLib.GlobalVariables.Settings.loadNavAids () [0x00000] in <filename unknown>:0
  at NavUtilLib.Analog.AnalogHSI.OnAwake () [0x00000] in <filename unknown>:0
  at InternalModule.Load (.ConfigNode node) [0x00000] in <filename unknown>:0
  at InternalProp.AddModule (.ConfigNode node) [0x00000] in <filename unknown>:0
  at InternalProp.Load (.ConfigNode node) [0x00000] in <filename unknown>:0
  at PartLoader.LoadInternalProp (.UrlConfig urlConf) [0x00000] in <filename unknown>:0
  at PartLoader+<CompileInternalProps>c__Iterator63.MoveNext () [0x00000] in <filename unknown>:0
  at UnityEngine.SetupCoroutine.InvokeMoveNext (IEnumerator enumerator, IntPtr returnValueAddress) [0x00000] in <filename unknown>:0
 
(Filename:  Line: -1)
 
Expand  

more likely what "NavUtil" mod is outdated

Edited by alexustas
Link to comment
Share on other sites

This thread is quite old. Please consider starting a new thread rather than reviving this one.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...