SpaceFace545 Posted October 6, 2021 Share Posted October 6, 2021 Well that was quick Quote Link to comment Share on other sites More sharing options...
davidy12 Posted October 6, 2021 Share Posted October 6, 2021 13 minutes ago, CobaltWolf said: Mount variants for S-1C. 5x, 4x, 3x, 2x. It's Sarnus Int-20 Time. PS: Out of curiosity, the docking target, could you guys make a version without the struts? Quote Link to comment Share on other sites More sharing options...
CobaltWolf Posted October 6, 2021 Author Share Posted October 6, 2021 Quote Link to comment Share on other sites More sharing options...
pTrevTrevs Posted October 6, 2021 Share Posted October 6, 2021 Gemini and Agena floating above Australia after an apogee boost to some 1,000km: Saturn I SA-6 and Apollo boilerplate: Side note, I've recently realized that I might have LC-34 rotated about 90 away from how it was in real life. Will confirm and rectify if necessary. stand-up guy lovechild of Pioneer 6 and OSO inserted into heliocentric orbit on Delta E: It occurred to me that I'm missing a lot of science by only making sun observations from LEO and MEO. Now I can stare at the sun from around the same distance, but without that pesky Earth in the way. Quote Link to comment Share on other sites More sharing options...
Naeth Kerman Posted October 6, 2021 Share Posted October 6, 2021 Just wondering, are stretched S-IC and S-II tanks planned? As well as 6x S-IC and 7x S-II engine mounts. Quote Link to comment Share on other sites More sharing options...
Beccab Posted October 6, 2021 Share Posted October 6, 2021 (edited) 4 hours ago, CobaltWolf said: Yeah, we're more going to focus on Apollo/Saturn "what-ifs" moving forward. But no plans to stop. We'll probably port everything to KSP2 at some point and keep working there. Is there any other rocket family/type that could still be added in the future or will there be 'just' probes and variants of rockets already in BDB? Edited October 6, 2021 by Beccab Quote Link to comment Share on other sites More sharing options...
Zorg Posted October 6, 2021 Share Posted October 6, 2021 3 hours ago, Beccab said: Is there any other rocket family/type that could still be added in the future or will there be 'just' probes and variants of rockets already in BDB? Speaking for myself I have no plans to make another rocket family. I do want to redo the atlas engines as mentioned previously plus redo some of the hardware and add some stuff. Plus I have a couple more non historical skylab stuff to do and IVAs. Beyond that perhaps a probe or two. By the time thats all done will have to see where we are with respect to a KSP2 release date. Quote Link to comment Share on other sites More sharing options...
Kais_The_Duck Posted October 6, 2021 Share Posted October 6, 2021 (edited) Hi guys does anyone know why my Apollo Spacecraft doesnt attach to the SLA fairing nicely? Theres a big gap between the SM and the SLA panels even though i used the supposedly correct parts and nodes (with the engine mount). These are all parts from the revamp. https://imgur.com/gallery/VZnUQhS Edited October 6, 2021 by Kais_The_Duck Quote Link to comment Share on other sites More sharing options...
Zorg Posted October 6, 2021 Share Posted October 6, 2021 42 minutes ago, Kais_The_Duck said: Hi guys does anyone know why my Apollo Spacecraft doesnt attach to the SLA fairing nicely? Theres a big gap between the SM and the SLA panels even though i used the supposedly correct parts and nodes (with the engine mount). These are all parts from the revamp. https://imgur.com/gallery/VZnUQhS Please do not use saturn rescale from extras anymore. The new saturn is at correct scale. Quote Link to comment Share on other sites More sharing options...
x170doom Posted October 6, 2021 Share Posted October 6, 2021 just a quick question regarding the historical apollo/saturn/skylab parts. are there any historical parts not yet in game or are all the historical parts and variants present? Quote Link to comment Share on other sites More sharing options...
Zorg Posted October 6, 2021 Share Posted October 6, 2021 3 minutes ago, x170doom said: just a quick question regarding the historical apollo/saturn/skylab parts. are there any historical parts not yet in game or are all the historical parts and variants present? er I think all the historical Saturn and Apollo parts are in game now. For Skylab I've been meaning to do the parasol/sunshade but apart from that everything else is in game. The Skylab workshop IVA may or may not make an initial release (probably not). 9 hours ago, davidy12 said: PS: Out of curiosity, the docking target, could you guys make a version without the struts? Should be easy enough. Quote Link to comment Share on other sites More sharing options...
x170doom Posted October 6, 2021 Share Posted October 6, 2021 1 minute ago, Zorg said: er I think all the historical Saturn and Apollo parts are in game now. For Skylab I've been meaning to do the parasol/sunshade but apart from that everything else is in game. The Skylab workshop IVA may or may not make an initial release (probably not). cheers, I was a bit lost on what components were completed since the issues on github haven't been updated in a while (some of the parts for the saturn v stack are still unticked) Quote Link to comment Share on other sites More sharing options...
derega16 Posted October 6, 2021 Share Posted October 6, 2021 9 hours ago, CobaltWolf said: Mount variants for S-1C. 5x, 4x, 3x, 2x. Is S-1D stage and half mount on your current plan? Quote Link to comment Share on other sites More sharing options...
Zarbon44 Posted October 6, 2021 Share Posted October 6, 2021 Absolutely in awe of the size of the lad. Perfect for international stuff. Goes very well with minty green. Quote Link to comment Share on other sites More sharing options...
Zorg Posted October 6, 2021 Share Posted October 6, 2021 16 hours ago, OrbitalManeuvers said: service module's flag UV is maybe borked? Reveal hidden contents Should be fixed now Quote Link to comment Share on other sites More sharing options...
DaveyJ576 Posted October 6, 2021 Share Posted October 6, 2021 Really digging the new upgrades, but waiting on the full release. Any date on that? BTW, I remember reading somewhere that one of the first upgrades planned for the IRL Saturn V was to ditch the fins on the 1st stage. It was shown that inflight stability met or exceeded expectations. The fins ended up being redundant and created more drag and weight than they were worth. The same source I read indicated that the 2nd production run of the Saturn V would have most likely deleted them, and would have continued the efforts at weight reduction for the entire vehicle. When combined with the new F-1A engines (already in development) you get a respectable performance upgrade for minimal development time, risk, and cost. Sigh. What a missed opportunity. Quote Link to comment Share on other sites More sharing options...
CobaltWolf Posted October 6, 2021 Author Share Posted October 6, 2021 9 hours ago, Naeth Kerman said: Just wondering, are stretched S-IC and S-II tanks planned? As well as 6x S-IC and 7x S-II engine mounts. Yes, stretched are planned. I don't know if I can make a 6x S-1C - the side counts of the models might make that a bit of a bear to pull off. The 7x S-II mount is already modeled, it just needs some extra textures made for the areas where the AO doesn't match up. 8 hours ago, Beccab said: Is there any other rocket family/type that could still be added in the future or will there be 'just' probes and variants of rockets already in BDB? 5 hours ago, Zorg said: Speaking for myself I have no plans to make another rocket family. I do want to redo the atlas engines as mentioned previously plus redo some of the hardware and add some stuff. Plus I have a couple more non historical skylab stuff to do and IVAs. Beyond that perhaps a probe or two. By the time thats all done will have to see where we are with respect to a KSP2 release date. Not off the top of my head, but, uh, trust us there's a lot of stuff left to make. We're not running out of ideas any time soon. 2 hours ago, x170doom said: just a quick question regarding the historical apollo/saturn/skylab parts. are there any historical parts not yet in game or are all the historical parts and variants present? 2 hours ago, x170doom said: cheers, I was a bit lost on what components were completed since the issues on github haven't been updated in a while (some of the parts for the saturn v stack are still unticked) Yeah I always hesitate to check off stuff from those lists - for instance the S-1C mount *just* got switching last night. 2 hours ago, derega16 said: Is S-1D stage and half mount on your current plan? The what? 43 minutes ago, DaveyJ576 said: Really digging the new upgrades, but waiting on the full release. Any date on that? None at the moment, still a good bit of stuff to do (Eyes parts, AJ-260, can't remember what else). I know I'd like to get a release out before we start getting too crazy with adding new-new stuff (not just revamps). Quote Link to comment Share on other sites More sharing options...
Beccab Posted October 6, 2021 Share Posted October 6, 2021 15 minutes ago, CobaltWolf said: The what? I presume the SI-D first stage Quote Link to comment Share on other sites More sharing options...
derega16 Posted October 6, 2021 Share Posted October 6, 2021 Just download the lastest apollo revamp build, tapered part of S-IV is missing Quote Link to comment Share on other sites More sharing options...
Zorg Posted October 6, 2021 Share Posted October 6, 2021 21 minutes ago, derega16 said: Just download the lastest apollo revamp build, tapered part of S-IV is missing I still see it. Quote Link to comment Share on other sites More sharing options...
Invaderchaos Posted October 6, 2021 Share Posted October 6, 2021 9 hours ago, Beccab said: Is there any other rocket family/type that could still be added in the future or will there be 'just' probes and variants of rockets already in BDB? At least for the moment, our to-do list is pretty much filled with revamps (mostly Apollo), probes, and a couple new Apollo parts. I’ve been doing a lot of probes lately and I have a lot more I plan to do for BDB and beyond. As for beyond probes, I am planning on revamping the newer Centaur variants that are in BDB. As for rockets families not in BDB, there’s nothing currently planned that at least I’m aware for BDB. That being said, eventually I want to make the fairing base and decoupler for MDD Barbarian. I also briefly considered the idea of potentially doing Vulcan, but my current to-do list is already big enough, plus I don’t think it’d be a good idea to do until Vulcan launches, and/or there are more pictures of flight-ready hardware for Vulcan itself as well as new Centaur for Vulcan. But no promises on that in the slightest. Quote Link to comment Share on other sites More sharing options...
derega16 Posted October 6, 2021 Share Posted October 6, 2021 32 minutes ago, Zorg said: I still see it. It didn't shown in mine Also top of the afapter did't match the dimension of the CSM Quote Link to comment Share on other sites More sharing options...
Zorg Posted October 6, 2021 Share Posted October 6, 2021 12 minutes ago, derega16 said: It didn't shown in mine Also top of the afapter did't match the dimension of the CSM Please don’t use the Saturn rescale patch Quote Link to comment Share on other sites More sharing options...
OrbitalManeuvers Posted October 6, 2021 Share Posted October 6, 2021 Has there been an "author-intended" layout shown or built for the two historical sim bay formats with the new experiments? Quote Link to comment Share on other sites More sharing options...
davidy12 Posted October 6, 2021 Share Posted October 6, 2021 7 hours ago, Zorg said: Speaking for myself I have no plans to make another rocket family. I do want to redo the atlas engines as mentioned previously plus redo some of the hardware and add some stuff. Plus I have a couple more non historical skylab stuff to do and IVAs. Beyond that perhaps a probe or two. By the time thats all done will have to see where we are with respect to a KSP2 release date. Honestly I’d say just modify the K0110 IVA and add some new props and revamp the textures. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.