Aelfhe1m Posted May 11, 2022 Share Posted May 11, 2022 13 minutes ago, SpaceFace545 said: To add on to this the module from Angel-125 has its own part so you could just grab that and clip it into your craft I'm curious, which part from which of Angel's many mods? Quote Link to comment Share on other sites More sharing options...
SpaceFace545 Posted May 11, 2022 Share Posted May 11, 2022 4 minutes ago, Aelfhe1m said: I'm curious, which part from which of Angel's many mods? I do believe it is from Buffalo 2 which is still in development Quote Link to comment Share on other sites More sharing options...
Angelo Kerman Posted May 11, 2022 Share Posted May 11, 2022 You'd just need ModulePowerUnitConverter from the Buffalo 2 plugin. It hasn't been released yet but here's the specs: MODULE { name = ModulePowerUnitConverter // In Breaking Ground Science, Power Unit is an integer, but resources like ElectricCharge use decimals. // The default is 0.25, so 1.0 EC = 4 PU. // This number was derived by comparing the size of the Breaking Ground Mini-NUK-PB RTG to the stock PB-NUK RTG, // and looking how how much ElectricCharge the stock RTG produces. That actually gives us 0.375 (the Mini-NUK is // about half as tall as the stock RTG), but we dropped that to 0.25 to make the math easier. ecPerPowerUnit = 0.25 // The maximum number of Power Units that the converter can provide. // Note that this is an integer value. The default is 10. // Multiply by ecPerPowerUnit to calculate how much ElectricCharge/sec that the power converter will consume. // If you leave focus on the vessel and come back, then the E.C. will be drained accordingly. maxPowerUnitsProduced = 10 } Quote Link to comment Share on other sites More sharing options...
Zorg Posted May 11, 2022 Share Posted May 11, 2022 We can certainly add a compatibility patch when Buffalo 2 is out Quote Link to comment Share on other sites More sharing options...
Lil_Bread402 Posted May 11, 2022 Share Posted May 11, 2022 Spoiler Loving the current LM variants now, especially the 3 crew variant for the Ascent Module Quote Link to comment Share on other sites More sharing options...
x170doom Posted May 11, 2022 Share Posted May 11, 2022 1 hour ago, Zorg said: We can certainly add a compatibility patch when Buffalo 2 is out the conversion factor that is described there would also probably need re-calculating since bdb changes the max output of the rtg Quote Link to comment Share on other sites More sharing options...
GoldForest Posted May 12, 2022 Share Posted May 12, 2022 11 hours ago, CobaltWolf said: I don't think we have a coder right now, so I don't think there's much we can do sadly. What happened to JSO? Are they okay? Quote Link to comment Share on other sites More sharing options...
OrbitalManeuvers Posted May 12, 2022 Share Posted May 12, 2022 (edited) These parts are literally game changers! Edited May 12, 2022 by OrbitalManeuvers Quote Link to comment Share on other sites More sharing options...
GoldForest Posted May 12, 2022 Share Posted May 12, 2022 12 minutes ago, OrbitalManeuvers said: These parts are literally game changers! Ah darn, beat me too it! Just saw the git like twenty minutes ago. Curse you KSP for taking half an hour to an hour to load! Quote Link to comment Share on other sites More sharing options...
pTrevTrevs Posted May 12, 2022 Share Posted May 12, 2022 Countdown until someone makes a forklift with the new LM ramp Quote Link to comment Share on other sites More sharing options...
xD-FireStriker Posted May 12, 2022 Share Posted May 12, 2022 2 hours ago, OrbitalManeuvers said: These parts are literally game changers! what mod is the rover cab? Quote Link to comment Share on other sites More sharing options...
GoldForest Posted May 12, 2022 Share Posted May 12, 2022 Full album: Imgur: The magic of the Internet Huge gallery, so only the beginning and ending pictures. If you want the rest, check the link. Based off: Zorg when? Quote Link to comment Share on other sites More sharing options...
Hay Posted May 12, 2022 Share Posted May 12, 2022 15 minutes ago, xD-FireStriker said: what mod is the rover cab? Quote Link to comment Share on other sites More sharing options...
Shlyopa Posted May 12, 2022 Share Posted May 12, 2022 On 5/10/2022 at 12:59 AM, Pappystein said: Yes yes yes, You have a Nice GE 405H powered Vega there But in some respects, I have used the Vega for just such a role (no boiloff... it should have LOX boiloff but everyone would loose there *STUFF* if that was in game because of all the "stockalike fuel" people.) But by the same token that is why my Hypergolic patches are in the Extras Folder now YES you too can now fuel your titan with 50/50 (AKA Aerozine50 and NTO)! I did not go into all the different fuel types because B9PS, while awesome, does not have an easy interface for 22 different fuel combos that is easy for a neophyte player. If it was a Hypergolic rocket in BDB it is now AZ50/NTO fueled. You also get the RL10B-3 (aka the XLR-119) that was canceled for Saturn and Centaur C. if you are using the AJ-9 Titan engine patch you get the Kerolox versions of that... and if you are like me and like Saturn II. My thrust reprofiling of the Agol to mimic the Minuteman M55 until a real one is made. (on the Dev Branch not the release or master branches) Found hypergolic patch in dev version, installed it (Pafftek), poison juice appeared as tank propellant option, but GE 405 still uses kerosene. I installed it wrong? Quote Link to comment Share on other sites More sharing options...
Zorg Posted May 12, 2022 Share Posted May 12, 2022 1 hour ago, Shlyopa said: Found hypergolic patch in dev version, installed it (Pafftek), poison juice appeared as tank propellant option, but GE 405 still uses kerosene. I installed it wrong? Vega is a kerolox stage Quote Link to comment Share on other sites More sharing options...
GoldForest Posted May 12, 2022 Share Posted May 12, 2022 1 hour ago, Shlyopa said: Found hypergolic patch in dev version, installed it (Pafftek), poison juice appeared as tank propellant option, but GE 405 still uses kerosene. I installed it wrong? IIRC, Pappy said some engines had hypergolic function added, but not all and they would get around to adding others when they had more time. 19 minutes ago, Zorg said: Vega is a kerolox stage Vega was supposed to use "Storable propellants." Wouldn't that imply hypergolic fuel? Quote Link to comment Share on other sites More sharing options...
Zorg Posted May 12, 2022 Share Posted May 12, 2022 6 minutes ago, GoldForest said: IIRC, Pappy said some engines had hypergolic function added, but not all and they would get around to adding others when they had more time. Vega was supposed to use "Storable propellants." Wouldn't that imply hypergolic fuel? To put it more precisely the GE405H powered main “Vega” second stage was kerolox. The JPL 6K powered third stage was storable (Hydrazine + NTO) Quote Link to comment Share on other sites More sharing options...
GoldForest Posted May 12, 2022 Share Posted May 12, 2022 Just now, Zorg said: To put it more precisely the GE405H powered main “Vega” second stage was kerolox. The JPL 6K powered third stage was storable (Hydrazine + NTO) Ah. Gotcha. I think further confusion comes from the comparison with Agena, which does use hypergolics. Quote Link to comment Share on other sites More sharing options...
GoldForest Posted May 12, 2022 Share Posted May 12, 2022 Apollo 20 (LM Shelter Delivery (No landing)) Aardvark I (LM Truck delivery) Apollo 21 (Lunar landing + LM Taxi) All three sitting on pads waiting for launch. (For purposes of these missions, the stock launch pad is a fictional LC-39C which was constructed for the purposes of being able to launch a third Saturn V without having to turn around one of the two existing towers) For these missions, previous lunar landing crews will be piloting the Shelter Delivery missions so that new crews can get to land on the Moon/Mun. The Apollo 20 shelter delivery missions consists of Neil Armstrong, Buzz Aldrin and Charles "Pete" Conrad. Landing missions will consist of astronauts who did not get to the surface of the moon. Apollo 21 consists of Michael Collins, Richard Gordon and John Young. In this timeline, Aardvark was made, but it's basically Apollo CSM with the seats removed and autonomous flight computer put in. (Basically, using the boilerplate CM) Quote Link to comment Share on other sites More sharing options...
Shlyopa Posted May 12, 2022 Share Posted May 12, 2022 So many Saturns... Quote Link to comment Share on other sites More sharing options...
GoldForest Posted May 12, 2022 Share Posted May 12, 2022 (edited) 17 minutes ago, Shlyopa said: So many Saturns... Well, all of them are needed. We could have possibly seen this irl if the AES program was funded. Though I wonder if NASA would have built a 3rd launch pad or just built another crawler and tower and just had it close to the pad so they could easily turn it around and launch the 3rd mission quickly. Edited May 12, 2022 by GoldForest Quote Link to comment Share on other sites More sharing options...
Jcking Posted May 12, 2022 Share Posted May 12, 2022 (edited) 1 hour ago, GoldForest said: Well, all of them are needed. We could have possibly seen this irl if the AES program was funded. Though I wonder if NASA would have built a 3rd launch pad or just built another crawler and tower and just had it close to the pad so they could easily turn it around and launch the 3rd mission quickly. Three pads, seven mobile launchers and two MSS (but still two crawlers) was proposed for the IMISCD study (Integrated Manned Interplanetary Spacecraft Concept Definition Study) Edited May 12, 2022 by Jcking Quote Link to comment Share on other sites More sharing options...
Jcking Posted May 12, 2022 Share Posted May 12, 2022 For the Taxi, is is possible to get the J class cutout on the descent stage? Quote Link to comment Share on other sites More sharing options...
CobaltWolf Posted May 12, 2022 Author Share Posted May 12, 2022 16 minutes ago, Jcking said: For the Taxi, is is possible to get the J class cutout on the descent stage? Yeah they're separate transforms so I just need to add variants that combine the extra AES taxi/truck bits with the J-class mesh. I honestly wasnt sure how useful it would be with the addition of the rover ramps. Quote Link to comment Share on other sites More sharing options...
JebTheDestroyer Posted May 12, 2022 Share Posted May 12, 2022 Wait are the new LEM variants out on the GitHub? I don't see them and it looks like the Development link on the the front page is broken. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.