AdmiralSirJohn Posted February 25, 2019 Share Posted February 25, 2019 Huh... I never noticed. I'll have to check the parts again... Quote Link to comment Share on other sites More sharing options...
Drakenex Posted February 25, 2019 Share Posted February 25, 2019 (edited) 5 hours ago, AdmiralSirJohn said: Like @TheRedTom said Tantares covers all Russian segment stuff. I'm trying to be accurate but within reason, keep a low part count but add some detail, CX fills the gaps for now 209 parts of awesomeness!! but also getting dreaded yellow flashes on my timer, so sadly I'll have to take off some details. Thanks @benjee10!! can't wait to see the revamped trusses and solar wings. Edited February 26, 2019 by Drakenex Quote Link to comment Share on other sites More sharing options...
grayal Posted February 26, 2019 Share Posted February 26, 2019 Where did the Trusses and Solar Arrays come from? Will they work with 1.6.1? Quote Link to comment Share on other sites More sharing options...
scottadges Posted February 26, 2019 Share Posted February 26, 2019 Question: In the download for HabTech2 there's the folder "Benjee10_sharedAssets" along with the GameData folder. Does anything in the "Benjee10" folder get updated along with each release? or just the Parts and Resources subfolders? Just curious if I need to overwrite that folder, or just the HabTech2 one (I'll just overwrite them both just to make sure) Thanks for all the amazing work! On 2/17/2019 at 9:32 AM, Drakenex said: Which mod is this from? I'm looking to create a version of the Lunar Gateway and would love to use Orion. But stock pods suck! Quote Link to comment Share on other sites More sharing options...
Drakenex Posted February 26, 2019 Share Posted February 26, 2019 1 hour ago, grayal said: Where did the Trusses and Solar Arrays come from? Will they work with 1.6.1? CxAerospace and yes they work on 1.6.1 33 minutes ago, scottadges said: Which mod is this from? I'm looking to create a version of the Lunar Gateway and would love to use Orion. But stock pods suck! @benjee10 own ReDirect Quote Link to comment Share on other sites More sharing options...
grayal Posted February 26, 2019 Share Posted February 26, 2019 (edited) Anything special i need to do to get CX to work? How about the trusses and solar arrays from the old HabTech will they work with the new HabTech2 and in 1.6.1? Edited February 26, 2019 by grayal Quote Link to comment Share on other sites More sharing options...
Gunslinger1 Posted February 26, 2019 Share Posted February 26, 2019 Where did that science pallet come from? Quote Link to comment Share on other sites More sharing options...
Z3R0_0NL1N3 Posted February 26, 2019 Share Posted February 26, 2019 (edited) While I liked the old HabTech's simple porkalike style when it was available, you've really done a fantastic job overhauling this! Does this more realistic approach follow along into the truss segments too? (so they're more like Cx's). How is S0 going to attach to Destiny? Are you planning anything with the robotic arms? One last question: Is Tranquility coming as a separate part, or is it the same one as Harmony? What's the difference between them IRL anyway? @Drakenex How did you get K.E.A.M. to work? I'm having issues with its textures even with the dependency Edited February 26, 2019 by Z3R0_0NL1N3 Quote Link to comment Share on other sites More sharing options...
golkaidakhaana Posted February 26, 2019 Share Posted February 26, 2019 6 hours ago, grayal said: Anything special i need to do to get CX to work? Nope, CxAerospace has no (non-bundled) dependencies and still works perfectly in 1.6.1. 1 hour ago, Gunslinger1 said: Where did that science pallet come from? I'm pretty certain it's a recoloured S4/6 / P4/6 truss segment from CxA. 1 hour ago, Z3R0_0NL1N3 said: One last question: Is Tranquility coming as a separate part, or is it the same one as Harmony? What's the difference between them IRL anyway? Tranquility is externally identical to Harmony, the only real differences are internal. @benjee10 Do you have a roadmap or a list of planned parts yet? Quote Link to comment Share on other sites More sharing options...
benjee10 Posted February 26, 2019 Author Share Posted February 26, 2019 On 2/25/2019 at 2:43 AM, sslaptnhablhat said: This is the issue I'm experiencing: Surface attach on the top of Harmony's bulkhead works fine... ...but on the bottom bulkhead, they're placed as if it's a sort-of 'top-sided' surface attach: I mentioned that the same applied to Columbus' bottom bulkhead, but this seemed to have fixed itself: I'm using the dependencies included with the latest update. I feel like this is probably an issue with how KSP handles radial attachment - there’s nothing about the colliders that should be causing this only on some parts and not others. 11 hours ago, Drakenex said: 209 parts of awesomeness!! but also getting dreaded yellow flashes on my timer, so sadly I'll have to take off some details. Thanks @benjee10!! can't wait to see the revamped trusses and solar wings. Awesome! Now I’ve gotta redo those trusses... 9 hours ago, scottadges said: Question: In the download for HabTech2 there's the folder "Benjee10_sharedAssets" along with the GameData folder. Does anything in the "Benjee10" folder get updated along with each release? or just the Parts and Resources subfolders? Just curious if I need to overwrite that folder, or just the HabTech2 one (I'll just overwrite them both just to make sure) Thanks for all the amazing work! Currently nothing has been updated there since it was added, but it’s good practice to update every time anyway. Sometimes I might make small tweaks here and there that would otherwise slip through. 3 hours ago, Z3R0_0NL1N3 said: While I liked the old HabTech's simple porkalike style when it was available, you've really done a fantastic job overhauling this! Does this more realistic approach follow along into the truss segments too? (so they're more like Cx's). How is S0 going to attach to Destiny? Are you planning anything with the robotic arms? One last question: Is Tranquility coming as a separate part, or is it the same one as Harmony? What's the difference between them IRL anyway? Definitely going for a more realistic approach to the trusses, hopefully with lots of variant switching to prevent clutter. I’m planning a radial truss docking port that will connect S0 to Destiny, still figuring out how the struts are going to work. Considering it being animated part that rises up/down, or providing anchor points for KAS pipes that mirror the look of the umbilicals along Destiny. i have some plans for robotic arms but they are very early stages. I want them to have some sort of function without being over complicated buggy IR monstrosities. Tranquility and Harmony are identical externally. IVAs are a way off so I’m not sure if I’m going to provide different internals for them yet. Hopefully the IVAs will be somewhat modular using the ISPRs so it may be quite easy to provide alternative configurations. 1 hour ago, sslaptnhablhat said: @benjee10 Do you have a roadmap or a list of planned parts yet? If it exists on the US segment of the ISS and isn’t some tiny greeble part, it’s planned. I’m still fleshing out exactly what I want, but up next will be truss and structural bits (e.g. Kibo exposes facility), SAWs, radiators, ESPs, all that sort of stuff, followed by science parts. After that I’m going to look at cancelled/proposed modules and stuff like CRV, things for DSG, maybe stretching to planetary stuff in the future (though that might be split into a separate mod - I’d love to tackle MMSEV etc some day). Quote Link to comment Share on other sites More sharing options...
Burning Kan Posted February 26, 2019 Share Posted February 26, 2019 Thanks for the fantastic work u have done ,and congratz to be a starmod-http://kerbaldevteam.tumblr.com/ Quote Link to comment Share on other sites More sharing options...
Gunslinger1 Posted February 26, 2019 Share Posted February 26, 2019 8 hours ago, sslaptnhablhat said: I'm pretty certain it's a recoloured S4/6 / P4/6 truss segment from CxA. Not the one on the truss, the one attached to the KIBO module. Quote Link to comment Share on other sites More sharing options...
Cheesecake Posted February 26, 2019 Share Posted February 26, 2019 12 hours ago, Gunslinger1 said: Where did that science pallet come from? It`s from the very old (Bobcat) Community-ISS-Mod. You can find an old version on github. Quote Link to comment Share on other sites More sharing options...
Gunslinger1 Posted February 26, 2019 Share Posted February 26, 2019 1 hour ago, Cheesecake said: It`s from the very old (Bobcat) Community-ISS-Mod. You can find an old version on github. Awesome! Thanks Cheesecake. Quote Link to comment Share on other sites More sharing options...
overkill13 Posted February 27, 2019 Share Posted February 27, 2019 Is there a dedicated habitation module in here or just the science labs? Quote Link to comment Share on other sites More sharing options...
benjee10 Posted February 27, 2019 Author Share Posted February 27, 2019 13 minutes ago, overkill13 said: Is there a dedicated habitation module in here or just the science labs? Not currently, but it’s planned along with the cancelled ISS Centrifuge Accomodation Module. Quote Link to comment Share on other sites More sharing options...
AdmiralSirJohn Posted February 27, 2019 Share Posted February 27, 2019 1 hour ago, benjee10 said: Not currently, but it’s planned along with the cancelled ISS Centrifuge Accomodation Module. Oh, great. Now I have to scrap my station and start over again... Quote Link to comment Share on other sites More sharing options...
AdmiralSirJohn Posted February 27, 2019 Share Posted February 27, 2019 Oh, and any chance of a stack node on Kibo so it can be docked, rather than berthed? (I can add one myself, but a set of coordinates would make it so much quicker...) Quote Link to comment Share on other sites More sharing options...
benjee10 Posted February 27, 2019 Author Share Posted February 27, 2019 25 minutes ago, AdmiralSirJohn said: Oh, and any chance of a stack node on Kibo so it can be docked, rather than berthed? (I can add one myself, but a set of coordinates would make it so much quicker...) There's a node where the exposed facility attaches which you could use - I don't really want people to be able to cover the airlock up but still have the functionality as an externally accessible KIS storage part. Quote Link to comment Share on other sites More sharing options...
AdmiralSirJohn Posted February 27, 2019 Share Posted February 27, 2019 Ah, okay. I'll add one to my copy for personal use (I don't use shuttles or RMS arms). I think I can place it so it doesn't interfere with the airlock. Quote Link to comment Share on other sites More sharing options...
kurgut Posted February 27, 2019 Share Posted February 27, 2019 @benjee10Hi, that's truely beautiful mod! Do you plan to add the truss-alike/solars/etc soon? Just asking since I'm building a space station right now, and If it's the case, I don't wanna have Cx mod for those, and then have yours that replace it, and be with a mod that I can't remove (too many mods/lag). If not, I'll stick with Cx, asking to plan! Thanks:) Quote Link to comment Share on other sites More sharing options...
benjee10 Posted February 27, 2019 Author Share Posted February 27, 2019 1 minute ago, kurgut said: @benjee10Hi, that's truely beautiful mod! Do you plan to add the truss-alike/solars/etc soon? Just asking since I'm building a space station right now, and If it's the case, I don't wanna have Cx mod for those, and then have yours that replace it, and be with a mod that I can't remove (too many mods/lag). If not, I'll stick with Cx, asking to plan! Thanks:) Thanks! Definitely starting work on the truss soon. Can't say exactly when it'll be released as I have quite a busy work schedule right now, but hopefully I can make a start this weekend. Quote Link to comment Share on other sites More sharing options...
benjee10 Posted March 2, 2019 Author Share Posted March 2, 2019 Sharing this awesome screenshot by Damon, showing the Tundra Exploration Dragon 2 docking at HabTech2 ISS - in honour of SpaceX’s successful liftoff of DM-1 this morning. Quote Link to comment Share on other sites More sharing options...
Damon Posted March 2, 2019 Share Posted March 2, 2019 (edited) 1 hour ago, benjee10 said: -super dope pic- Sharing this awesome screenshot by Damon, showing the Tundra Exploration Dragon 2 docking at HabTech2 ISS - in honour of SpaceX’s successful liftoff of DM-1 this morning. Loving the parts! Really adds the detail I needed for my stations. Edited March 2, 2019 by damonvv Quote Link to comment Share on other sites More sharing options...
benjee10 Posted March 3, 2019 Author Share Posted March 3, 2019 S0 Truss section progress pics: The bipods start folded flat against the truss and will rotate down to meet a 2.5m module. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.