dave1904 Posted October 26, 2021 Share Posted October 26, 2021 (edited) On 10/25/2021 at 8:50 PM, Zorg said: There is a bit of a myth in the community that pressure fed means no ullage required. This isnt true. Even the LM needed ullage. I struggle to find any bipropellant stages that dont require ullage. The Agena D engine (and its not even pressure fed) does not require ullage because it uses a special sump tank to feed the engine for start that I supposed can deliver the fuel cleanly. Technically its not the engine that doesnt need ullage per se, the fuel feed system on the Agena D is able to feed the engine. IIRC I also dont have ullage requirement on the RS30 because I found something in the docs, I think something about a pumped idle mode or something where it can blow donw some propellant using the secondary pumps enough to provide self ullage. I dont know the exact physics behind the problems even with pressure fed stages needing ullage to settle it but this the information I've found. Mostly by looking up the sources in the Realism Overhaul engine config templates (which cite sources and are well researched). Edit: to answer the first question, the Ables were hotstaged Expand Thanks. I was looking all over the web and could not find a single source that mentioned that able was hotstage. I was hotstaging the whole time and thought I was doing it wrong. I thought that the able could start once and obviously not restart without ullage after reading it somewhere yesterday. Maybe that person got the Agena and able stage mixed up. I have a second question about the thor able/delta. When I play 3.5 rescale is it cheating to set the fuel tank capacity to stock on the able/delta stages? I simply do not have the delta v to get into orbit even with the star srb. As mentioned I want to fulfill BDB satalite contracts with the real life launches because that forces me to learn about old rockets that I know nothing about. Edited October 26, 2021 by dave1904 Quote Link to comment Share on other sites More sharing options...
Zorg Posted October 26, 2021 Share Posted October 26, 2021 (edited) On 10/26/2021 at 4:44 PM, dave1904 said: I have a second question about the thor able/delta. When I play 3.5 rescale is it cheating to set the fuel tank capacity to stock on the able/delta stages? I simply do not have the delta v to get into orbit even with the star srb. As mentioned I want to fulfill BDB satalite contracts with the real life launches because that forces me to learn about old rockets that I know nothing about. Expand What's cheating in KSP? play as you like. All we can say is that we balance around 2.7x (to be exact JNSQ as a reference for the last two years or so). Even then its not a precise balance like RO/RSS some of the smaller rockets might be a bit underpowered and Saturn is slightly overpowered. Beyond 2.5/2.7x scales you're on your own. Whether you want to adjust the balance, use SMURFF or just build bigger rockets for a given payload. Edited October 26, 2021 by Zorg Quote Link to comment Share on other sites More sharing options...
davidy12 Posted October 26, 2021 Share Posted October 26, 2021 On 10/26/2021 at 4:44 PM, dave1904 said: I have a second question about the thor able/delta. When I play 3.5 rescale is it cheating to set the fuel tank capacity to stock on the able/delta stages? I simply do not have the delta v to get into orbit even with the star srb. As mentioned I want to fulfill BDB satalite contracts with the real life launches because that forces me to learn about old rockets that I know nothing about. Expand I'm with @Zorg, if you really don't like the tedium of launching use mechjeb to automate your launches. Or use alt-F12 and edit your orbit or DL hyperedit to be more precise. Works well in JNSQ and I'm sure it'll work in any RSS size as well. Quote Link to comment Share on other sites More sharing options...
Grimmas Posted October 26, 2021 Share Posted October 26, 2021 Or write a kOS script for launch and then go get a cup of coffee Quote Link to comment Share on other sites More sharing options...
mozartbeatle Posted October 26, 2021 Share Posted October 26, 2021 Was there an intentional change to the drag characteristics of the SLA panels in the nosecone update? Using a Saturn 1b prior to them being added I was able to just squeak into a 130km orbit without firing the engine of the CSM, but even making sure the nose is disabled I fall quite a bit short now even trying with mechjeb and the guide. This is in JNSQ, no Ferram or anything. Also, minor issue, but the apollo capsule gets dangerously hot very easily despite a full heatshield recently. And very, very minor issue. Apollo is quite bouncy in water when ablator is low. Quote Link to comment Share on other sites More sharing options...
Entr8899 Posted October 26, 2021 Share Posted October 26, 2021 On 10/26/2021 at 2:50 AM, Invaderchaos said: LDC texture touchups pretty much done. Just need to fix a couple details and bugs Expand So... the Saturn texture was changed from white with black roll lines to solid black? Quote Link to comment Share on other sites More sharing options...
space_powder Posted October 26, 2021 Share Posted October 26, 2021 On 10/26/2021 at 6:17 PM, Entr8899 said: So... the Saturn texture was changed from white with black roll lines to solid black? Expand Or it could be a new variant alongside the Saturn one Quote Link to comment Share on other sites More sharing options...
davidy12 Posted October 26, 2021 Share Posted October 26, 2021 Kerballo 9 New reflective CM, lookin' EPIC. PS: @CobaltWolfthe red CM nose/chute mount/heatshield is kinda pointless since its for the boiler plate. Quote Link to comment Share on other sites More sharing options...
TruthfulGnome Posted October 26, 2021 Share Posted October 26, 2021 On 10/26/2021 at 7:29 PM, davidy12 said: New reflective CM, lookin' EPIC. Expand Welcome Quote Link to comment Share on other sites More sharing options...
davidy12 Posted October 26, 2021 Share Posted October 26, 2021 On 10/26/2021 at 7:33 PM, TruthfulGnome said: Welcome Expand Oh, you gave him the config, thanks a ton Gnome! Quote Link to comment Share on other sites More sharing options...
TruthfulGnome Posted October 26, 2021 Share Posted October 26, 2021 On 10/26/2021 at 7:33 PM, davidy12 said: Oh, you gave him the config, thanks a ton Gnome! Expand Yep we've been working together, I'm still trying to make it look even better because right now it's a bit too dark and looks almost black Quote Link to comment Share on other sites More sharing options...
davidy12 Posted October 26, 2021 Share Posted October 26, 2021 Also, just for the record, the white CM is reflective as well. Quote Link to comment Share on other sites More sharing options...
SpaceFace545 Posted October 26, 2021 Share Posted October 26, 2021 On 10/26/2021 at 8:01 PM, davidy12 said: Also, just for the record, the white CM is reflective as well. Expand Hmm that’s a bit trickier to figure out. Bellabong’s titan TU configs have that sorted out somehow. Quote Link to comment Share on other sites More sharing options...
TruthfulGnome Posted October 26, 2021 Share Posted October 26, 2021 On 10/26/2021 at 8:01 PM, davidy12 said: Also, just for the record, the white CM is reflective as well. Expand Yep well aware, i believe the only fix for that is to have a mesh that's separate from the rest that's just for the Shiny variant Quote Link to comment Share on other sites More sharing options...
davidy12 Posted October 26, 2021 Share Posted October 26, 2021 On 10/26/2021 at 8:05 PM, TruthfulGnome said: Yep well aware, i believe the only fix for that is to have a mesh that's separate from the rest that's just for the Shiny variant Expand I mean the Skylab paint doesn't have reflective parts. Quote Link to comment Share on other sites More sharing options...
Zorg Posted October 26, 2021 Share Posted October 26, 2021 On 10/26/2021 at 8:07 PM, davidy12 said: I mean the Skylab paint doesn't have reflective parts. Expand Thats made up of two meshes, one for grey, one for white. Quote Link to comment Share on other sites More sharing options...
Invaderchaos Posted October 26, 2021 Share Posted October 26, 2021 On 10/26/2021 at 7:29 PM, davidy12 said: Kerballo 9 New reflective CM, lookin' EPIC. PS: @CobaltWolfthe red CM nose/chute mount/heatshield is kinda pointless since its for the boiler plate. Expand Firstly, the boilerplate texture is mainly intended to just be a cool paint variant for the CM since I always liked the style. Technically, that type of boilerplate was never even flown on a Saturn, it was dropped from a helicopter (iirc). The boiler plates that flown on Saturn I were painted white. Secondly, when you do Saturn I boilerplates you will likely need to construct the full Apollo (heat shield and all). This is because the boilerplate CM’s weighed around the same as the actual CM. While they weren’t proper CM’s and often had ballast to increase the weight, we don’t have any plans to add in any proper boilerplate specific parts for the CM (there will be a boilerplate SM for Pegasus) so the boilerplate stuff *does* include heat shields and such. Quote Link to comment Share on other sites More sharing options...
1something Posted October 26, 2021 Share Posted October 26, 2021 On 10/26/2021 at 9:06 AM, Hay said: Have you tried retracting the ring? Expand No, but I'll try that. On 10/26/2021 at 10:11 AM, Zorg said: Added a variant to the Skylab/S4B fairing without the wallbase for a shorter minimum length (still adjustable via wall segments). This option is only available on the fairing base itself not the airlock modules. the ring is to be kept extended for intial "soft docking" to make contact and align. Once soft docked and the petals are interlocked, retract the ring on the active version to hard dock. If this doesnt work its probably due to the rescale. Expand Ok, thanks guys! Quote Link to comment Share on other sites More sharing options...
TaintedLion Posted October 26, 2021 Share Posted October 26, 2021 How do you get that sweet lookin reflective CM? Also I asked earlier but it got buried, I want to switch out the IVAs for Mercury and Apollo with the ones from FASA, how would I go about doing that? Quote Link to comment Share on other sites More sharing options...
Zorg Posted October 26, 2021 Share Posted October 26, 2021 On 10/26/2021 at 10:00 PM, TaintedLion said: How do you get that sweet lookin reflective CM? Also I asked earlier but it got buried, I want to switch out the IVAs for Mercury and Apollo with the ones from FASA, how would I go about doing that? Expand There is now an official compatibility config and textures as of today (courtesy of Truthful Gnome) . Just install Textures Unlimited and update BDB. All white painted ones look metallic currently but a fix is incoming. Quote Link to comment Share on other sites More sharing options...
Adam-Kerman Posted October 26, 2021 Share Posted October 26, 2021 INT-17, I believe? Quote Link to comment Share on other sites More sharing options...
Invaderchaos Posted October 26, 2021 Share Posted October 26, 2021 LDC texture touchups are now on github. Quote Link to comment Share on other sites More sharing options...
Adam-Kerman Posted October 26, 2021 Share Posted October 26, 2021 so if don't want shiny CM, do delete the TU Folder in Compatibility folder or does this also mess skylab up? Quote Link to comment Share on other sites More sharing options...
TaintedLion Posted October 27, 2021 Share Posted October 27, 2021 On 10/26/2021 at 10:41 PM, Adam-Kerman said: INT-17, I believe? Expand black arrow saturn bottom text Quote Link to comment Share on other sites More sharing options...
SpaceFace545 Posted October 27, 2021 Share Posted October 27, 2021 On 10/26/2021 at 11:58 PM, Adam-Kerman said: so if don't want shiny CM, do delete the TU Folder in Compatibility folder or does this also mess skylab up? Expand Yes Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.