sacredbacon Posted January 2, 2020 Share Posted January 2, 2020 (edited) I am having an issue where one of the HUD's text is larger and blurry when compared to the other. Any idea as to what might be causing this? Edited January 2, 2020 by sacredbacon Quote Link to comment Share on other sites More sharing options...
linuxgurugamer Posted January 7, 2020 Share Posted January 7, 2020 On 10/19/2019 at 5:55 PM, jrbudda said: Ya this is what the majority of my time updating was spent on: fixing the XML serialization issues. @jrbudda I found a couple of small issues with KER: First, to eliminate annoying message that KerbalEngineer.Unity is missing, add the following to the AssemblyInfo.cs [assembly: KSPAssemblyDependency("KerbalEngineer.Unity", 1, 0)] Second, to eliminate errors in the log about D3D error was 80070057 Convert the two images in the Textures directory to DDS, you can use the DDS4KSP program to do so Quote Link to comment Share on other sites More sharing options...
DeadJohn Posted January 8, 2020 Share Posted January 8, 2020 On 12/5/2019 at 12:28 AM, DeadJohn said: I noticed a discrepancy in my reported DeltaV and TWR. KER says one set of values while the default KSP display says something else. I also noticed that the KER suicide burn estimates are less reliable than normal. This is only happening with one lander already in flight. Screenshot and log file are linked below. Data from the screen shot: DV KER = 5648 m/s KSP = 3857 m/s TWR KER = 4.72 KSP = 3.88 The problem does not seem to be widespread. Other ships in flight seem okay. The craft with the problem seems okay if I look in VAB; KER and KSP agree there. I also copied the lander to a new sandbox save, cheated it into orbit, and KER and KSP agree on the DV in flight. Further testing with Hyperedit shows that as I add and remove ablator and monoprop, KER refreshes the new mass, TWR, and acceleration. The DV does not change, though, unless I change the Liquid Fuel or Oxidizer amount. Any idea what's happening here? Is this an obscure KER bug, corrupted savefile, or something else? I'm using KER 1.1.6 under KSP 1.7.3. Mods include the JNSQ planet pack; that's a 2.7x sized system. The ship with the problem uses parts from Blue Dog Design Bureau. Log file: https://drive.google.com/open?id=1m3H64R_VIKoXeyIN-F-FFf8UzQ23Af-G Screen shot: https://drive.google.com/open?id=1YmvhkKDvP1D8MSY5Vdn7mukLs0T1bSLa Does anyone have any advice on this? I'm continuing to have issues where KER calculations seem wrong for some vessels. Some are good, others get incorrect numbers for DV, TWR, suicide burns, etc. The incorrect craft use a variety of engines, fuels, and designs so I don't think it's a bad part config. For example, the original problem lander I posted used the LFO stock Terrier and staging, a different problem spaceplane uses lithium engines from Near Future and was never staged nor docked to another craft. Quote Link to comment Share on other sites More sharing options...
AVaughan Posted January 8, 2020 Share Posted January 8, 2020 @DeadJohn Just from looking at your screenshot, what seems to be going on is KER is reporting the dV (and TWR) your stage 0 will have if you stage now, whilst the ingame dV display is reporting the dV (and TWR) you have without staging. (Note KER's per stage breakdown. 0dV in stage 1, and 5648 in stage 0). Since KER is assuming that you are going ditch stage 1 now, it is probably using just the stage 0 TWR and mass when calculating the suicide burn as well. Personally I always have the fuel for landing on the landing stage, even if I use the same engine for landing and ascent. Quote Link to comment Share on other sites More sharing options...
Crixomix Posted February 2, 2020 Share Posted February 2, 2020 Question, If I want to nuke my KSP install and start fresh, but I don't want to have to set up all my KER windows with all their proper readouts and settings in the right places, what files do I backup? Where is the file(s) that keeps all that info? Thanks, Quote Link to comment Share on other sites More sharing options...
HansAcker Posted February 2, 2020 Share Posted February 2, 2020 43 minutes ago, Crixomix said: Where is the file(s) that keeps all that info? In GameData/KerbalEngineer/Settings/*.xml I save this folder between installs, too. I just have my HUD set up the way I like it Quote Link to comment Share on other sites More sharing options...
Nicky21 Posted February 8, 2020 Share Posted February 8, 2020 I also use JNSQ and KER reports of DeltaV are highly innacurate. I failed to achieve orbit (4900 dv required) with a craft that was reported to have 6000+ DV. Quote Link to comment Share on other sites More sharing options...
DeadJohn Posted February 8, 2020 Share Posted February 8, 2020 7 hours ago, Nicky21 said: I also use JNSQ and KER reports of DeltaV are highly innacurate. I failed to achieve orbit (4900 dv required) with a craft that was reported to have 6000+ DV. What did KSP's DV calculation show? Quote Link to comment Share on other sites More sharing options...
Darkherring Posted February 10, 2020 Share Posted February 10, 2020 Hi, I'm having a small issue with KER after update to 1.8.1. It doesn't remember the GUI size I've selected. After every restart of a game I have to chance GUI size from 0 to 3. Is there a quick fix for that? Quote Link to comment Share on other sites More sharing options...
Kim Hanson Posted February 12, 2020 Share Posted February 12, 2020 On 12/4/2019 at 10:28 PM, DeadJohn said: I noticed a discrepancy in my reported DeltaV and TWR. KER says one set of values while the default KSP display says something else. I also noticed that the KER suicide burn estimates are less reliable than normal. This is only happening with one lander already in flight. Screenshot and log file are linked below. Data from the screen shot: DV KER = 5648 m/s KSP = 3857 m/s TWR KER = 4.72 KSP = 3.88 The problem does not seem to be widespread. Other ships in flight seem okay. The craft with the problem seems okay if I look in VAB; KER and KSP agree there. I also copied the lander to a new sandbox save, cheated it into orbit, and KER and KSP agree on the DV in flight. Further testing with Hyperedit shows that as I add and remove ablator and monoprop, KER refreshes the new mass, TWR, and acceleration. The DV does not change, though, unless I change the Liquid Fuel or Oxidizer amount. Any idea what's happening here? Is this an obscure KER bug, corrupted savefile, or something else? I'm using KER 1.1.6 under KSP 1.7.3. Mods include the JNSQ planet pack; that's a 2.7x sized system. The ship with the problem uses parts from Blue Dog Design Bureau. Log file: https://drive.google.com/open?id=1m3H64R_VIKoXeyIN-F-FFf8UzQ23Af-G Screen shot: https://drive.google.com/open?id=1YmvhkKDvP1D8MSY5Vdn7mukLs0T1bSLa DeadJohn, I have a similar issue. In my case things seem fine in flight but at the VAB my numbers are as out of wack as yours. ISP, Thrust, TWR, delta V, and Burn are all much too high in KER. If they were correct, I could send my little orbiter satellite to escape the sun. For the record, I am a noob. I'm running Vanilla 1.8.1 with KER and Automated Science Sampler, so it's quite possible I screwed something up-- except you seem to have the same issue. Quote Link to comment Share on other sites More sharing options...
Nicky21 Posted February 12, 2020 Share Posted February 12, 2020 On 2/8/2020 at 5:32 PM, DeadJohn said: What did KSP's DV calculation show? I don't remember exactly, as this was a few days before. Quote Link to comment Share on other sites More sharing options...
jrbudda Posted February 13, 2020 Share Posted February 13, 2020 (edited) The existing version (1.1.7.1) seems to work fine with KSP 1.9 The new drain part looks like it will require an update that breaks backwards compatibility, so I will look into that and a few of the pending pull requests this weekend. Edited February 13, 2020 by jrbudda Quote Link to comment Share on other sites More sharing options...
Stone Blue Posted February 13, 2020 Share Posted February 13, 2020 (edited) @Nicky21 & @Kim Hanson would you be up for trying VOID, instead of KER, to see if VOID has the same issue? I'm not sure if both installed at once would trip over each others feet, so might have to uninstall KER to try VOID... vOv Edited February 13, 2020 by Stone Blue Quote Link to comment Share on other sites More sharing options...
linuxgurugamer Posted February 13, 2020 Share Posted February 13, 2020 30 minutes ago, Stone Blue said: @Nicky21 & @Kim Hanson would you be up for trying VOID, instead of KER, to see if VOID has the same issue? I'm not sure if both installed at once would trip over each others feet, so might have to uninstall KER to try VOID... vOv They won't interfere with each other, but you shouldn't do that for very long since each can be resource intensive (ie: cpu) Quote Link to comment Share on other sites More sharing options...
Stone Blue Posted February 13, 2020 Share Posted February 13, 2020 (edited) @linuxgurugamer IIRC, I recall reading that MechJeb and/or VOID actually use quite a bit of the KER code for the calculations... vOv Is this indeed the case with VOID? vOv EDIT: Hmm.. may have just answered my own question? From the VOID OP: Quote This software uses VesselSimulator and Engineer.Extensions from Engineer Redux. SO would those be the "bits" that handle dV calculations? vOv Edited February 13, 2020 by Stone Blue Quote Link to comment Share on other sites More sharing options...
Regor Posted February 14, 2020 Share Posted February 14, 2020 On 2/13/2020 at 9:35 AM, Nicky21 said: I don't remember exactly, as this was a few days before. Orbititing Kerbin does NOT need 6000dv, 3600 at the max Quote Link to comment Share on other sites More sharing options...
Krakatoa Posted February 14, 2020 Share Posted February 14, 2020 38 minutes ago, mabdi36 said: Orbititing Kerbin does NOT need 6000dv, 3600 at the max They said they were playing on JNSQ. Quote Link to comment Share on other sites More sharing options...
jrbudda Posted February 14, 2020 Share Posted February 14, 2020 After some investigation I have determined the following about the new Drain part: It uses a totally new internal module type Active draining resources provide thrust The ISP of thrust is defined in RESOURCE_DRAIN_DEFINITION in the resource's cfg file. The ISP of most vanilla resources is 5 Any unknown resource (i.e. a resource that does not have a definition) is drainable by default with an ISP of 50. The stock dV calculation does not integrate draining in any way. The stock dV calculation does not even update if you drain all your fuel on the pad before launching. In theory an active drain is providing thrust to the vessel and should be considered as a 'engine' in the flight simulation, but honestly I don't see a point. Given that specifically integrating modeuleResourceDrain into the flight simulator will break backwards compatibility for KER. I'm inclined to do nothing with it. Happy to hear any opinions on the matter. Quote Link to comment Share on other sites More sharing options...
DStaal Posted February 14, 2020 Share Posted February 14, 2020 I can think of a few pathological cases where I'd care about the dV/thrust/etc of a fuel drain - but honestly all of them could be solved with tweaks to rocket design. I'm ok with leaving it out. KER should update as the fuel level drops however. Quote Link to comment Share on other sites More sharing options...
Regor Posted February 14, 2020 Share Posted February 14, 2020 18 hours ago, Krakatoa said: They said they were playing on JNSQ. oh yes i see that now Quote Link to comment Share on other sites More sharing options...
Daniel Prates Posted February 15, 2020 Share Posted February 15, 2020 (edited) On 2/13/2020 at 12:10 AM, jrbudda said: The existing version (1.1.7.1) seems to work fine with KSP 1.9 Works fine in my game. Edited February 15, 2020 by Daniel Prates Quote Link to comment Share on other sites More sharing options...
DStaal Posted February 19, 2020 Share Posted February 19, 2020 I wouldn't say the existing version works perfectly in KSP 1.9. The bold text is fuzzy. Otherwise I see no issues. Quote Link to comment Share on other sites More sharing options...
Warezcrawler Posted February 19, 2020 Share Posted February 19, 2020 @jrbudda I just noticed that Stock KSP cannot calculate burntime correctly when using my mod "GTIndustries", while Kerbal Engineer Redux does that no problem. Thank you for that --- KER for the win! Quote Link to comment Share on other sites More sharing options...
dxeh Posted February 21, 2020 Share Posted February 21, 2020 (edited) doesn't work properly in 1.9 indeed. Yes it gives orbital references as AP and PE and such. But the function of dV readouts and manouvrenode readouts doesn't seem to work on my end. Also my KER UI positions reset every time i boot the game. Edit : was using the 1.1.7.0. version.... Edited February 21, 2020 by dxeh edit Quote Link to comment Share on other sites More sharing options...
PeaceFighter Posted February 24, 2020 Share Posted February 24, 2020 Has anyone the problem with the Text in the HUD not showing at all ... like if the mod wasn't installed? I'm playing on 1.8.1 but tried 1.9 as well already. Do i have to unlock a sertain tech or upgrade a building to get the benefits of the mod? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.