GoldForest Posted April 16, 2022 Share Posted April 16, 2022 4 minutes ago, Galileo chiu said: quick question, does this version work with Realism Overhaul? I think it's up to the RO people to provide the patches. Don't quote me, but I think it's up to them to do it. Quote Link to comment Share on other sites More sharing options...
Galileo chiu Posted April 16, 2022 Share Posted April 16, 2022 1 minute ago, GoldForest said: I think it's up to the RO people to provide the patches. Don't quote me, but I think it's up to them to do it. right. Quote Link to comment Share on other sites More sharing options...
JoeSheridan Posted April 16, 2022 Share Posted April 16, 2022 1 minute ago, flamerboy67664 said: ayyyo its my birthday in this timezone and the full release of the AS revamp is such a doozy big thanks Happy birthday Quote Link to comment Share on other sites More sharing options...
Minmus Taster Posted April 16, 2022 Share Posted April 16, 2022 1 hour ago, CobaltWolf said: Bluedog Design Bureau v1.10.0 "Луна" (Click image to see update album) DOWNLOADGITHUB | SPACEDOCK Changelog: v1.10.0 New Content and features - BIG REVAMP OF SATURN, APOLLO & SKYLAB!! Apollo - New Apollo capsule with multiple variants including Skylab and Boilerplate variants - Official PBR support for Apollo capsule via Textures Unlimited with custom PBR textures (Thanks to Truthful Gnome) - New block II SM with realistic SIM-bay and alternate bay interiors - Apollo CM terrestrial landing heatshield with legs and retro motors - New SIM-bay experiments and revamped sub satellite - New LM with independent legs and silver MLI variant - New LM and CSM engines - 16 new surface experiment parts based on the Apollo Lunar Surface Experiment Package (ALSEP). Requires Breaking Ground DLC. - Multiple R4D rcs variant blocks - LM MESA experiment, goo experiment based on RTG cask, and cosmic ray detector - Revamped ETS advanced Apollo service modules and mission modules - revamped AARDVARK block I and block II, plus unpressurised segment. - new accurate CADS docking port in passive and active models (1.25m) - Apollo Boilerplate CM and SM - New Apollo SM Doppler Antenna (used on ASTP mission) Saturn - All new Saturn V at correct real world to KSP scale ( S1C and SII now 6.25m, SIVB 4.25m). - Multiple variant lengths for S1C including various stretches for MLV as well as common bulkhead variant. - Variants for S1C engine mount - Multiple mounting truss options for the SLA. Wide SLA variant with straight walls for larger payloads - Multiple variant lengths, 5x and 7x engine mount variants for SII. - SII to 3.75m Generic mount and dedicated 3.75m M1 engine mount. - Multiple variant lengths, SOFI texture variant and LASS mount option for the S4B - Variants for Saturn V engine mount - S1D Atlas style half staging mount and vernier engine - New inline and radial AJ260 solid rocket motor in multiple length variants - Revamped and resized Saturn I (first stage 4.25m, S4 3.75m) with multiple length switches - 6.25m (MLV) and 4.25m (Skylab style), and 3.75m SAF fairings. - 2.5m Saturn I fairing variant - Truss adapter for AARDV and Centaur - New E-1 engine - New sustainer variant for the F1 - New H2 variant (subtype on the H1) Skylab - All new historical Skylab with Breaking Ground based robotics truss for the ATM - Jettisonable shielding for the orbital workshop with custom PBR texture support via Textures Unlimited for the bare workshop - Skylab external experiments - New wet workshop model - New Venus flyby wet workshop with expanded shielding and 12x solar panels - New Venus flyby mission module with unpressurised cargo bay, experiments and reentry probes. - New ETS Spacelab parts - Aft MDA based on EOSS proposals for expanding Skylab derived from the back Gemini - parts for Big Gemini conical service module (4.25m S4B diameter) - Abort tower for Big Gemini Other - New Saturn I-based Pegasus micrometeorite satellite - Replaced old APAS (0.9375m) with new model by Benjee10. Compatible without conflict with Benjees own mods (Habtech, SOCK etc) - Apollo Soyuz Test Project (ASTP) docking adapter and experiment - APAS 75 docking port from ASTP. Compatible with corresponding Soyuz base counterpart being added to Tantares. - New Agena Horizon Sensor part (definitely apollo related) Updates and Enhancements - Update bundled Waterfall to 0.8.1 - Some solar panel EC output balancing - Minor science balancing - New Agena Avionics Unit 'split' paint variant - DCSS 2.5m Fairing Base paint variants (white, black, and gray) Bug fixes - Fix more typos - Minor tag fixes - Fix Delta IV engine shroud texture Quote Link to comment Share on other sites More sharing options...
Random Annoying Guy Posted April 16, 2022 Share Posted April 16, 2022 The new update is 666 MB... Quote Link to comment Share on other sites More sharing options...
Galileo chiu Posted April 16, 2022 Share Posted April 16, 2022 23 minutes ago, Random Annoying Guy said: The new update is 666 MB... DEVILS! Quote Link to comment Share on other sites More sharing options...
Rocketology Posted April 16, 2022 Share Posted April 16, 2022 BDB is one of my favorite rocket mods, the details are outstanding! And has more parts than you'll know what to do with! Well done Team @CobaltWolf! Pair this with @AlphaMensae's awesome Launchpads mod for maximum immersion! Quote Link to comment Share on other sites More sharing options...
dababykerman Posted April 16, 2022 Share Posted April 16, 2022 2 hours ago, CobaltWolf said: Bluedog Design Bureau v1.10.0 "Луна" (Click image to see update album) DOWNLOADGITHUB | SPACEDOCK Changelog: v1.10.0 New Content and features - BIG REVAMP OF SATURN, APOLLO & SKYLAB!! Apollo - New Apollo capsule with multiple variants including Skylab and Boilerplate variants - Official PBR support for Apollo capsule via Textures Unlimited with custom PBR textures (Thanks to Truthful Gnome) - New block II SM with realistic SIM-bay and alternate bay interiors - Apollo CM terrestrial landing heatshield with legs and retro motors - New SIM-bay experiments and revamped sub satellite - New LM with independent legs and silver MLI variant - New LM and CSM engines - 16 new surface experiment parts based on the Apollo Lunar Surface Experiment Package (ALSEP). Requires Breaking Ground DLC. - Multiple R4D rcs variant blocks - LM MESA experiment, goo experiment based on RTG cask, and cosmic ray detector - Revamped ETS advanced Apollo service modules and mission modules - revamped AARDVARK block I and block II, plus unpressurised segment. - new accurate CADS docking port in passive and active models (1.25m) - Apollo Boilerplate CM and SM - New Apollo SM Doppler Antenna (used on ASTP mission) Saturn - All new Saturn V at correct real world to KSP scale ( S1C and SII now 6.25m, SIVB 4.25m). - Multiple variant lengths for S1C including various stretches for MLV as well as common bulkhead variant. - Variants for S1C engine mount - Multiple mounting truss options for the SLA. Wide SLA variant with straight walls for larger payloads - Multiple variant lengths, 5x and 7x engine mount variants for SII. - SII to 3.75m Generic mount and dedicated 3.75m M1 engine mount. - Multiple variant lengths, SOFI texture variant and LASS mount option for the S4B - Variants for Saturn V engine mount - S1D Atlas style half staging mount and vernier engine - New inline and radial AJ260 solid rocket motor in multiple length variants - Revamped and resized Saturn I (first stage 4.25m, S4 3.75m) with multiple length switches - 6.25m (MLV) and 4.25m (Skylab style), and 3.75m SAF fairings. - 2.5m Saturn I fairing variant - Truss adapter for AARDV and Centaur - New E-1 engine - New sustainer variant for the F1 - New H2 variant (subtype on the H1) Skylab - All new historical Skylab with Breaking Ground based robotics truss for the ATM - Jettisonable shielding for the orbital workshop with custom PBR texture support via Textures Unlimited for the bare workshop - Skylab external experiments - New wet workshop model - New Venus flyby wet workshop with expanded shielding and 12x solar panels - New Venus flyby mission module with unpressurised cargo bay, experiments and reentry probes. - New ETS Spacelab parts - Aft MDA based on EOSS proposals for expanding Skylab derived from the back Gemini - parts for Big Gemini conical service module (4.25m S4B diameter) - Abort tower for Big Gemini Other - New Saturn I-based Pegasus micrometeorite satellite - Replaced old APAS (0.9375m) with new model by Benjee10. Compatible without conflict with Benjees own mods (Habtech, SOCK etc) - Apollo Soyuz Test Project (ASTP) docking adapter and experiment - APAS 75 docking port from ASTP. Compatible with corresponding Soyuz base counterpart being added to Tantares. - New Agena Horizon Sensor part (definitely apollo related) Updates and Enhancements - Update bundled Waterfall to 0.8.1 - Some solar panel EC output balancing - Minor science balancing - New Agena Avionics Unit 'split' paint variant - DCSS 2.5m Fairing Base paint variants (white, black, and gray) Bug fixes - Fix more typos - Minor tag fixes - Fix Delta IV engine shroud texture Amazing! I've a question though, will the craft files work or are they still being worked on? Last time it didn't really work well and I wanted to know if I should wait for the craft files to be done. Quote Link to comment Share on other sites More sharing options...
NateDaBeast Posted April 16, 2022 Share Posted April 16, 2022 Small bug I found (I think) This is the advanced heat shield, these markings stay on the part regardless of the paint job. Quote Link to comment Share on other sites More sharing options...
Teslamax Posted April 16, 2022 Share Posted April 16, 2022 I have a predictable issue. I used bluedog.Apollo.Block2.DockingLight2 in several craft. With the new version all these craft will not load. Has this part been renamed? (In that case I can just add a MM config to rename the part.) Quote Link to comment Share on other sites More sharing options...
Michel Bartolone Posted April 16, 2022 Share Posted April 16, 2022 2 hours ago, Teslamax said: I have a predictable issue. I used bluedog.Apollo.Block2.DockingLight2 in several craft. With the new version all these craft will not load. Has this part been renamed? (In that case I can just add a MM config to rename the part.) I can't answer your question, BUT I found a couple more: I just did a CKAN upgrade, started the game and I find I'm missing bluedog.Saturn.VFB.Dish, and bluedog.ApolloBlock5.ServiceEngine from two of my space stations. 2 hours ago, Michel Bartolone said: I can't answer your question, BUT I found a couple more: I just did a CKAN upgrade, started the game and I find I'm missing bluedog.Saturn.VFB.Dish, and bluedog.ApolloBlock5.ServiceEngine from two of my space stations. and more: bluedog.LEM.Descent.Engine bluedog.Apollo.Block3.Capsule Quote Link to comment Share on other sites More sharing options...
Zorg Posted April 16, 2022 Share Posted April 16, 2022 (edited) 11 minutes ago, Michel Bartolone said: I can't answer your question, BUT I found a couple more: I just did a CKAN upgrade, started the game and I find I'm missing bluedog.Saturn.VFB.Dish, and bluedog.ApolloBlock5.ServiceEngine from two of my space stations. and more: bluedog.LEM.Descent.Engine bluedog.Apollo.Block3.Capsule All major BDB updates are generally breaking changes as parts get replaced, this one even more so due to the number of parts being revamped. You can downgrade the BDB version in CKAN and reload the save, retire old craft and then upgrade again if you didnt want to start a new save. Edit: unfortunately there is no way to provide this warning via CKAN. Edited April 16, 2022 by Zorg Quote Link to comment Share on other sites More sharing options...
dababykerman Posted April 16, 2022 Share Posted April 16, 2022 yeah no the craft files don't work, they're all incompatible and the saturn crafts are missing parts Quote Link to comment Share on other sites More sharing options...
TruthfulGnome Posted April 16, 2022 Share Posted April 16, 2022 1 minute ago, dababykerman said: yeah no the craft files don't work, they're all incompatible and the saturn crafts are missing parts They haven't been updated yet Quote Link to comment Share on other sites More sharing options...
dababykerman Posted April 16, 2022 Share Posted April 16, 2022 2 minutes ago, TruthfulGnome said: They haven't been updated yet it said they were in the changelog 5 minutes ago, TruthfulGnome said: They haven't been updated yet and the saturn ones are all missing a fairing or something Quote Link to comment Share on other sites More sharing options...
Zorg Posted April 16, 2022 Share Posted April 16, 2022 16 minutes ago, dababykerman said: yeah no the craft files don't work, they're all incompatible and the saturn crafts are missing parts Craft files were created in KSP 1.12.3, the only version of KSP BDB now officially supports as KSP is now end of life and thats the latest update. If you want to use the craft files in older versions you will need to use a text editor and change the version in the file. If any saturn craft are missing specific parts please let me know the exact details. If its regarding fairings, make sure you have simple adjustable fairings installed. Quote Link to comment Share on other sites More sharing options...
N3N Posted April 16, 2022 Share Posted April 16, 2022 1 hour ago, Zorg said: All major BDB updates are generally breaking changes as parts get replaced, this one even more so due to the number of parts being revamped. You can downgrade the BDB version in CKAN and reload the save, retire old craft and then upgrade again if you didnt want to start a new save. Edit: unfortunately there is no way to provide this warning via CKAN. Hey @Zorg, does that mean, that even Kerbalism needs new patches for this new update of this beautiful great mod? Quote Link to comment Share on other sites More sharing options...
Zorg Posted April 16, 2022 Share Posted April 16, 2022 1 minute ago, N3N said: Hey @Zorg, does that mean, that even Kerbalism needs new patches for this new update of this beautiful great mod? Almost certainly yes as there are new parts with new names. Kerbalism support for BDB has always been provided on the Kerbalism side as its quite complex and none of us use it so you would need to check with them (or help them out with a PR ) Quote Link to comment Share on other sites More sharing options...
dababykerman Posted April 16, 2022 Share Posted April 16, 2022 13 minutes ago, Zorg said: Craft files were created in KSP 1.12.3, the only version of KSP BDB now officially supports as KSP is now end of life and thats the latest update. If you want to use the craft files in older versions you will need to use a text editor and change the version in the file. If any saturn craft are missing specific parts please let me know the exact details. If its regarding fairings, make sure you have simple adjustable fairings installed. Alright. So I can just go into the files and change it to whatever version i'm using? And the part was like the 2.5 saturn fairing. I'll look into it in abit, thanks. Quote Link to comment Share on other sites More sharing options...
Zorg Posted April 16, 2022 Share Posted April 16, 2022 9 minutes ago, dababykerman said: Alright. So I can just go into the files and change it to whatever version i'm using? And the part was like the 2.5 saturn fairing. I'll look into it in abit, thanks. Yes thats right. And if you still have errors, specific craft file and missing part details will help trace the problem. Quote Link to comment Share on other sites More sharing options...
N3N Posted April 16, 2022 Share Posted April 16, 2022 13 minutes ago, Zorg said: Almost certainly yes as there are new parts with new names. Kerbalism support for BDB has always been provided on the Kerbalism side as its quite complex and none of us use it so you would need to check with them (or help them out with a PR ) OK, thank you @Zorg. Just for your Info @Sir Mortimer. Quote Link to comment Share on other sites More sharing options...
Friznit Posted April 16, 2022 Share Posted April 16, 2022 (edited) As @Zorgsaid I updated all craft files to use SAF fairings and bumped the version to 1.12.3 If you have old save games or your own craft files that you'd like to update, you an find and replace the old part names using a text editor fairly easily. What I do is make a new ship with the "offending" part in a simple build, look up the name in the craft file then copy, find and replace in my "broken" craft. With Notepad++ you can find and replace across all open files so you can quickly fix a whole bunch in one go. Edited April 16, 2022 by Friznit Quote Link to comment Share on other sites More sharing options...
dababykerman Posted April 16, 2022 Share Posted April 16, 2022 40 minutes ago, Friznit said: As @Zorgsaid I updated all craft files to use SAF fairings and bumped the version to 1.12.3 If you have old save games or your own craft files that you'd like to update, you an find and replace the old part names using a text editor fairly easily. What I do is make a new ship with the "offending" part in a simple build, look up the name in the craft file then copy, find and replace in my "broken" craft. With Notepad++ you can find and replace across all open files so you can quickly fix a whole bunch in one go. How would I do that with Notepad++? I have notepad++ open but don't know what to do. Quote Link to comment Share on other sites More sharing options...
Pappystein Posted April 16, 2022 Share Posted April 16, 2022 1 minute ago, dababykerman said: How would I do that with Notepad++? I have notepad++ open but don't know what to do. you can use the Search File function. I use it all the time to merge mods on another game. Point it at the directory with your craft files. Search for *.Craft. No slight intended here but if you need more help after that then you probably shouldn't be doing anything because you are risking breaking the entire game. Quote Link to comment Share on other sites More sharing options...
TaintedLion Posted April 16, 2022 Share Posted April 16, 2022 YOOOOO congrats on the release now do more stuff now this is a threat Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.