AmateurAstronaut1969 Posted April 11, 2021 Share Posted April 11, 2021 (edited) 1 hour ago, Starhelperdude said: do you play with a planetpack? No, but thanks anyway - stock scale, stock system 16 minutes ago, Friznit said: Are you using BDBNIC? Yes I am, but I wasn’t using a coloured CSM on this mission Edited April 11, 2021 by AmateurAstronaut1969 Quote Link to comment Share on other sites More sharing options...
Cheesecake Posted April 11, 2021 Share Posted April 11, 2021 (edited) 9 hours ago, AmateurAstronaut1969 said: Yes I am, but I wasn’t using a coloured CSM on this mission That`s irrelevat. There is a problem with the parachute. Open the Apollo.cfg inside of BDBNIC and delete the following (red marked): Quote @PART[bluedog_Apollo_Block2_DockingLight,bluedog_Apollo_Block2_DockingLight2,bluedog_Apollo_Block2_ParachuteMount,bluedog_Apollo_Block2_Capsule,bluedog_Apollo_Block3_Capsule,bluedog_Apollo_Block1_Nose,bluedog_Apollo_Block2_ActiveDockingMechanism,bluedog_Apollo_Block2_Parachute] That should solve the problem. Edited April 12, 2021 by Cheesecake Quote Link to comment Share on other sites More sharing options...
AmateurAstronaut1969 Posted April 11, 2021 Share Posted April 11, 2021 Ok thanks so much Quote Link to comment Share on other sites More sharing options...
KeaKaka Posted April 12, 2021 Share Posted April 12, 2021 8 hours ago, Cheesecake said: That`s irrelevat. There is a problem with the parachute. Open the Apollo.cfg inside of BDBNIC and delte the following (red marked): That should solve the problem. I was also having the same problem, thanks for the fix! Quote Link to comment Share on other sites More sharing options...
derega16 Posted April 12, 2021 Share Posted April 12, 2021 (edited) Another thing I forgot to ask for Saturn revamp, is revamped S1-C engine mount's mesh possible to be modified for this thing? I don't know if engine fairing meshs are the same piece with cylindrical part or it is separated with full cylindrical part unearthed PS. I found a document with nice-clear illustration on how each LM delivered vehicles supposed to look like. Also this is the clearest image of LM truck I've ever seen that is not a mystery box on top of descent stage https://www.hq.nasa.gov/alsj/LM23_LM_Derivatives_LMD1-13.pdf Edited April 12, 2021 by derega16 Quote Link to comment Share on other sites More sharing options...
alberro+ Posted April 12, 2021 Share Posted April 12, 2021 7 hours ago, derega16 said: Another thing I forgot to ask for Saturn revamp, is revamped S1-C engine mount's mesh possible to be modified for this thing? I don't know if engine fairing meshs are the same piece with cylindrical part or it is separated with full cylindrical part unearthed PS. I found a document with nice-clear illustration on how each LM delivered vehicles supposed to look like. Also this is the clearest image of LM truck I've ever seen that is not a mystery box on top of descent stage https://www.hq.nasa.gov/alsj/LM23_LM_Derivatives_LMD1-13.pdf Wonder what kinda stuff this was meant to launch. Quote Link to comment Share on other sites More sharing options...
Zorg Posted April 12, 2021 Share Posted April 12, 2021 Little preview RS30 Advanced Space Engine for anyone who missed it. This is only slightly larger than an RL10A4 and will fit on a Dual Engine Centaur mount. transpiration cooling mini nozzles Quote Link to comment Share on other sites More sharing options...
Naeth Kerman Posted April 12, 2021 Share Posted April 12, 2021 1 minute ago, Zorg said: Little preview RS30 Advanced Space Engine for anyone who missed it. This is only slightly larger than an RL10A4 and will fit on a Dual Engine Centaur mount. transpiration cooling mini nozzles Looks Amazing! Quote Link to comment Share on other sites More sharing options...
AmateurAstronaut1969 Posted April 12, 2021 Share Posted April 12, 2021 Oh wow! That looks Ace 2 minutes ago, Zorg said: Little preview RS30 Advanced Space Engine for anyone who missed it. This is only slightly larger than an RL10A4 and will fit on a Dual Engine Centaur mount. transpiration cooling mini nozzles Quote Link to comment Share on other sites More sharing options...
Spaceman.Spiff Posted April 12, 2021 Share Posted April 12, 2021 2 minutes ago, Zorg said: transpiration cooling mini nozzles The level of detail here is incredible! Quote Link to comment Share on other sites More sharing options...
JoeSheridan Posted April 14, 2021 Share Posted April 14, 2021 (edited) I am using the ETS stuff alot but especially the Block III/IV/V Service module from now has (in my opinion) two deficits, so here are my suggestions: 1. Do you plan to bring at least one service bay into the rebuilt model? I love them on the Block I/ II because i can pack my Kerbalism stuff into it without ruining the looks. 2nd: Could you bring, at least for Life support / kerbalism configs a LOT more power capacitiy into it? Just enough for a 2-3 day rendezvous to a station. The second suggestion is meant for the Lunar Module too. Without Solar panels the one from now is dead after 4-8 hours. Anyways: I am looking forward to the new stuff especially for the ETS and INT-Family. I am using the Saturn-II but i am eager to pack some 1207 SRB´s on them without the awkward look they give it now Edited April 14, 2021 by JoeSheridan Quote Link to comment Share on other sites More sharing options...
DaveyJ576 Posted April 14, 2021 Share Posted April 14, 2021 On 4/12/2021 at 5:21 AM, derega16 said: Another thing I forgot to ask for Saturn revamp, is revamped S1-C engine mount's mesh possible to be modified for this thing? I don't know if engine fairing meshs are the same piece with cylindrical part or it is separated with full cylindrical part unearthed PS. I found a document with nice-clear illustration on how each LM delivered vehicles supposed to look like. Also this is the clearest image of LM truck I've ever seen that is not a mystery box on top of descent stage https://www.hq.nasa.gov/alsj/LM23_LM_Derivatives_LMD1-13.pdf The LM Shelter was what I had in mind for my design a few pages back. If I could just get a ladder to attach to the airlock I would be in business. Quote Link to comment Share on other sites More sharing options...
derega16 Posted April 14, 2021 Share Posted April 14, 2021 3 hours ago, JoeSheridan said: I am using the ETS stuff alot but especially the Block III/IV/V Service module from now has (in my opinion) two deficits, so here are my suggestions: 1. Do you plan to bring at least one service bay into the rebuilt model? I love them on the Block I/ II because i can pack my Kerbalism stuff into it without ruining the looks. 2nd: Could you bring, at least for Life support / kerbalism configs a LOT more power capacitiy into it? Just enough for a 2-3 day rendezvous to a station. The second suggestion is meant for the Lunar Module too. Without Solar panels the one from now is dead after 4-8 hours. Anyways: I am looking forward to the new stuff especially for the ETS and INT-Family. I am using the Saturn-II but i am eager to pack some 1207 SRB´s on them without the awkward look they give it now Well, actually there is no block V service module in BDB, just it's engines and solar panels, according to ETS it is a bit bigger than Block III,IV's. I prefer to use a custom US2 3 sections service module for this one Quote Link to comment Share on other sites More sharing options...
JoeSheridan Posted April 14, 2021 Share Posted April 14, 2021 3 hours ago, derega16 said: Well, actually there is no block V service module in BDB, just it's engines and solar panels, according to ETS it is a bit bigger than Block III,IV's. I prefer to use a custom US2 3 sections service module for this one I know and i do often the same, just because of that power problem on the Blocks III and IV, Block V is usefull as it is now. But thats okay for now. I just wanted to make that suggestion to make this mod even better even with LS-Mods in the Game. Quote Link to comment Share on other sites More sharing options...
linuxgurugamer Posted April 14, 2021 Share Posted April 14, 2021 @CobaltWolf I'm working on updating an older mod, ComfortableLanding. It has references in a patch to the following parts: bluedog_Gemini_Crew_A bluedog_Gemini_Crew_B I assume these have been replaced by newer parts, can you tell me what those are? Unfortunately for this, I don't use BDB at this time and am not really familiar with it. Thanks LGG Quote Link to comment Share on other sites More sharing options...
Jso Posted April 14, 2021 Share Posted April 14, 2021 2 hours ago, linuxgurugamer said: I'm working on updating an older mod, ComfortableLanding. It has references in a patch to the following parts: bluedog_Gemini_Crew_A bluedog_Gemini_Crew_B bluedog_Gemini_Crew_A is now bluedog_Gemini_Capsule bluedog_Gemini_Crew_B is bluedog_BigG_Cabin Quote Link to comment Share on other sites More sharing options...
JoeSheridan Posted April 14, 2021 Share Posted April 14, 2021 2 hours ago, linuxgurugamer said: I'm working on updating an older mod, ComfortableLanding. Thank you for doing this I love that mod and having the functions back for the new Gemini will be perfect Quote Link to comment Share on other sites More sharing options...
Zorg Posted April 15, 2021 Share Posted April 15, 2021 Two more engines mostly finished texturing: Pratt & Whitney RL20-P3 If you missed the earlier discussion this was Pratt & Whitney's first attempt at a staged combustion cycle design. It was vaguely mentioned in at least one Saturn improvement study as a drop in J2 replacement and the vac version has been tested and found to cleanly fit in mount truss of Cobalts upcoming SII stage. While the engine was never made, ultimately it seems more real than the mysterious HG-3 program which was more a study of various components than a specific engine design. So we're giving you this instead of HG-3. Pratt & Whitney XLR-129 Again if you missed the earlier discussion, the XLR129 was a direct successor to the RL20. Also staged combustion and a similar powerhead where the turbos and preburner connect to a central chamber above the combustion chamber. However instead of a Y shape, this uses a triaxial arrangement and also adds low pressure pumps/inducers upstream of the main turbos. (similar to RS30 as well). The XLR129 was originally meant for a B52 launched rocket powered boost glide spyplane and after that got cancelled P&W uprated it and tried to push it for the shuttle program where it did not succeed against Rocketdyne's RS25. This will be capable of running with the nozzle extended or retracted and will be availabel in 1:35/75 and 1:80/144 expansion ratios. Quote Link to comment Share on other sites More sharing options...
Spaceman.Spiff Posted April 15, 2021 Share Posted April 15, 2021 7 minutes ago, Zorg said: RL20-P3 WOW!!!!! that is a l o o o o o o g nozzle Quote Link to comment Share on other sites More sharing options...
Starhelperdude Posted April 15, 2021 Share Posted April 15, 2021 can we have a BDB-SOCK crossover event with a 4x XLR129 shuttle adapter? just a idea xD Quote Link to comment Share on other sites More sharing options...
CollectingSP Posted April 15, 2021 Share Posted April 15, 2021 Just wanted to say that this mod is Legendary. it's been my favorite for a while. I've been Using the Delta IV parts a TON, as the Delta IV is my favorite launch system. I also really like the KH-9 parts. I'm planning on launching a KH-11 Kitbash (on Delta IV, of course) soon with those components. Keep up the Great work guys! Quote Link to comment Share on other sites More sharing options...
Zorg Posted April 15, 2021 Share Posted April 15, 2021 22 minutes ago, CollectingSP said: Just wanted to say that this mod is Legendary. it's been my favorite for a while. I've been Using the Delta IV parts a TON, as the Delta IV is my favorite launch system. I also really like the KH-9 parts. I'm planning on launching a KH-11 Kitbash (on Delta IV, of course) soon with those components. Keep up the Great work guys! Glad you're enjoying it! And welcome to the forums Quote Link to comment Share on other sites More sharing options...
KeaKaka Posted April 16, 2021 Share Posted April 16, 2021 On 4/8/2021 at 9:02 AM, OrbitalManeuvers said: I have two minor plume issues, can anyone confirm? The Inon engine mount shows no RCS plumes, and the Leo "Gus" thrusters show a translate forward RCS plume, but not an engine plume with the throttle. I'm on 1.11.2, BDB-github. Waterfall RCS plumes seem to be working fine on other parts. Can confirm, the Dual Engine Centaur mount shows absolutely no plume whatsoever. Quote Link to comment Share on other sites More sharing options...
somnambulist Posted April 16, 2021 Share Posted April 16, 2021 9 hours ago, KeaKaka said: Can confirm, the Dual Engine Centaur mount shows absolutely no plume whatsoever. I'm also missing plumes on the LR9107-167 (will log a github issue) Quote Link to comment Share on other sites More sharing options...
OrbitalManeuvers Posted April 16, 2021 Share Posted April 16, 2021 2 hours ago, somnambulist said: I'm also missing plumes on the LR9107-167 (will log a github issue) hmm, there must be multiple things going on because this one works fine for me. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.