KeaKaka Posted August 16, 2021 Share Posted August 16, 2021 Couple of bug reports relating to tracking antennas: The revamped Apollo CSM tracking antenna only tracks on one axis when I believe it should track on two/three axis. Also I don't know if this problem persists but if I recall correctly the Mariner 10 tracking antenna didn't track when the straight variant was selected. Quote Link to comment Share on other sites More sharing options...
Zorg Posted August 16, 2021 Share Posted August 16, 2021 19 minutes ago, KeaKaka said: Couple of bug reports relating to tracking antennas: The revamped Apollo CSM tracking antenna only tracks on one axis when I believe it should track on two/three axis. Also I don't know if this problem persists but if I recall correctly the Mariner 10 tracking antenna didn't track when the straight variant was selected. Only single axis tracking is possible in KSP. I'll take another look at the mariner antenna if someone can confirm the straight version has issues. Quote Link to comment Share on other sites More sharing options...
OrbitalManeuvers Posted August 16, 2021 Share Posted August 16, 2021 1 hour ago, Zorg said: if someone can confirm the straight version has issues. I grabbed github probably a week ago? Can confirm that the straight variant unfolds but does not track. Quote Link to comment Share on other sites More sharing options...
KeaKaka Posted August 16, 2021 Share Posted August 16, 2021 IDK If this would be possible in KSP but I'll just put this here as a suggestion. Feel free to turn it down. Quote Link to comment Share on other sites More sharing options...
pTrevTrevs Posted August 17, 2021 Share Posted August 17, 2021 A new computer and a new career save, this time in KSRSS. My first flight in this new game is a quick and dirty kitbash of the Viking sounding rocket, obviously made from the Vanguard first stage: Too bad Kerbal Konstructs is supposedly broken in 1.12, and KSC Switcher doesn't have a config for White Sands, NM. Also, I got tired of the ugly holdover IVA Mercury still has and replaced it with the one from FASA. Only problem I've seen so far is that the interior space is pushed too far forward in the spacecraft: At least it doesn't feel like I'm staring out of a storm drain now. Quote Link to comment Share on other sites More sharing options...
Zorg Posted August 17, 2021 Share Posted August 17, 2021 (edited) 8 hours ago, pTrevTrevs said: Too bad Kerbal Konstructs is supposedly broken in 1.12, and KSC Switcher doesn't have a config for White Sands, NM. I set up a new install recently (mostly intended for BDB screenshots) using the KSRSS beta and Cape Kaneveral with KK and it seemed fine during the couple of tests I did. (perhaps there are more issues lurking for me i dunno) Edited August 17, 2021 by Zorg Quote Link to comment Share on other sites More sharing options...
pTrevTrevs Posted August 17, 2021 Share Posted August 17, 2021 Just now, Zorg said: I set up a new install recently (mostly intended for BDB screenshots) using the KSRSS beta and Cape Kaneveral with KK and it seemed fine during the couple of tests I did. From what I understand, you can still *use* statics with KK in 1.12, but you can’t place or edit them because of the changes the update made to the additional launch sites. For that, you have to go back to 1.11, I guess. Quote Link to comment Share on other sites More sharing options...
Entr8899 Posted August 17, 2021 Share Posted August 17, 2021 Is it just me or is the Star 48 incorrectly sized? It doesn't seem to fit on adapters and decouplers properly. It looks somewhere in between 0.625 and 0.9375 sizes. https://prnt.sc/1q55ufz Quote Link to comment Share on other sites More sharing options...
Minmus Taster Posted August 17, 2021 Share Posted August 17, 2021 20 minutes ago, Entr8899 said: Is it just me or is the Star 48 incorrectly sized? It doesn't seem to fit on adapters and decouplers properly. It looks somewhere in between 0.625 and 0.9375 sizes. https://prnt.sc/1q55ufz There is a LOT of that in the dev branch sadly. Quote Link to comment Share on other sites More sharing options...
Friznit Posted August 17, 2021 Share Posted August 17, 2021 1 hour ago, Zorg said: I set up a new install recently (mostly intended for BDB screenshots) using the KSRSS beta and Cape Kaneveral with KK and it seemed fine during the couple of tests I did. (perhaps there are more issues lurking for me i dunno) Mine was working until a couple of days ago. Not sure what got updated (KK, Kopernicus or KSRSS) but Kape Kernaveral is underwater again. Made for some interesting pics of a sea launched Saturn though. Quote Link to comment Share on other sites More sharing options...
TheKSPBeginner Posted August 17, 2021 Share Posted August 17, 2021 38 minutes ago, Entr8899 said: Is it just me or is the Star 48 incorrectly sized? It doesn't seem to fit on adapters and decouplers properly. It looks somewhere in between 0.625 and 0.9375 sizes. https://prnt.sc/1q55ufz Same on my end Version is 1.8.1a from CKAN Quote Link to comment Share on other sites More sharing options...
Zorg Posted August 17, 2021 Share Posted August 17, 2021 (edited) 1 hour ago, Entr8899 said: Is it just me or is the Star 48 incorrectly sized? It doesn't seem to fit on adapters and decouplers properly. It looks somewhere in between 0.625 and 0.9375 sizes. https://prnt.sc/1q55ufz 24 minutes ago, TheKSPBeginner said: Same on my end Version is 1.8.1a from CKAN The Star 37 and Star 48 were rescaled in BDB 1.8 to exact IRL dimensions x 0.625. This takes them away from existing stack diameters but was important to do to resolve scaling issues with probes such as Clementine which are built around these motors. since they're not cylindrical stack parts we didnt feel the size difference to stack sizes was a big problem. 43 minutes ago, Minmus Taster said: There is a LOT of that in the dev branch sadly. Dev branches and even the github master should always be considered at your own risk. Edited August 17, 2021 by Zorg Quote Link to comment Share on other sites More sharing options...
CobaltWolf Posted August 17, 2021 Author Share Posted August 17, 2021 Cool video posted on Reddit by /u/Znatrix Quote Link to comment Share on other sites More sharing options...
Cdodders Posted August 17, 2021 Share Posted August 17, 2021 (edited) it had to be done. You know it did. Edited August 17, 2021 by Cdodders Quote Link to comment Share on other sites More sharing options...
Kass__XAP Posted August 17, 2021 Share Posted August 17, 2021 (edited) Hadley Rille LM shakedown. Edited August 17, 2021 by Pioneer_Steve Quote Link to comment Share on other sites More sharing options...
Adam-Kerman Posted August 17, 2021 Share Posted August 17, 2021 Quote Link to comment Share on other sites More sharing options...
Pappystein Posted August 17, 2021 Share Posted August 17, 2021 6 hours ago, CobaltWolf said: Cool video posted on Reddit by /u/Znatrix Neat Video, Wonder how long it will last before Tears for Fears (or their label) pull it down. Still Songs from the Big Chair was a pivotal album for Tears for Fears. At-least it wasn't set to Europe's "The Final Countdown" from 2 years latter! Quote Link to comment Share on other sites More sharing options...
Pappystein Posted August 17, 2021 Share Posted August 17, 2021 32 minutes ago, Pioneer_Steve said: @CobaltWolf So happy you kept the Columbium/Niobium blueish black on the TR201! For those not in the Know, Columbium (known in Europe as Niobium... and mysteriously on the Periodic table as the same.... Must be Like Lead) Anyway Columbium, when exposed to oxygen corrodes into a bluish black color. Freshly formed it is almost a mix of polished Chrome and Steel in color. Columbium was used on latter variants of the LR81 (the Agena Engine), and Various AJ 10 marks including the Shuttle OMS (AJ10-190?) 2nd and 3rd versions of the Titan Transtage, AJ10-118F/G/J and K (Delta and JAXA N1 engines) and on the inside of the the AJ10-128 SPS engine for the Apollo SM. That in addition to the LMDE/TR201. The TR201 is a surpluse LMDE that had the advanced control circuit replaced with a much simpler system. Reducing costs and making it easier to program the analog/Digital Autopilot on Delta P. I might be missing a few engine/stage combinations but those are the big US ones I can remember off the top of my head where COlumbium was used in the bell... that you would already know about. I believe the Titan Launch Dispenser's AJ23 engine also had Columbium in the bell.... but all the photos of it are pretty bad and the one YouTube video on it covers a partially scrapped specimen. (TLD was only launched like 6 times for Top Secret Programs.) Pioneer_Steve, Please keep posting your pictures, they are VERY VERY good! Quote Link to comment Share on other sites More sharing options...
Kass__XAP Posted August 17, 2021 Share Posted August 17, 2021 1 hour ago, Pappystein said: @CobaltWolf So happy you kept the Columbium/Niobium blueish black on the TR201! For those not in the Know, Columbium (known in Europe as Niobium... and mysteriously on the Periodic table as the same.... Must be Like Lead) Anyway Columbium, when exposed to oxygen corrodes into a bluish black color. Freshly formed it is almost a mix of polished Chrome and Steel in color. Columbium was used on latter variants of the LR81 (the Agena Engine), and Various AJ 10 marks including the Shuttle OMS (AJ10-190?) 2nd and 3rd versions of the Titan Transtage, AJ10-118F/G/J and K (Delta and JAXA N1 engines) and on the inside of the the AJ10-128 SPS engine for the Apollo SM. That in addition to the LMDE/TR201. The TR201 is a surpluse LMDE that had the advanced control circuit replaced with a much simpler system. Reducing costs and making it easier to program the analog/Digital Autopilot on Delta P. I might be missing a few engine/stage combinations but those are the big US ones I can remember off the top of my head where COlumbium was used in the bell... that you would already know about. I believe the Titan Launch Dispenser's AJ23 engine also had Columbium in the bell.... but all the photos of it are pretty bad and the one YouTube video on it covers a partially scrapped specimen. (TLD was only launched like 6 times for Top Secret Programs.) Pioneer_Steve, Please keep posting your pictures, they are VERY VERY good! Thank you very much, I had no idea about why the colouring is the way it is. Quote Link to comment Share on other sites More sharing options...
birdog357 Posted August 17, 2021 Share Posted August 17, 2021 @Zorg I think I may have found my issue with getting the science out of the KH-10. Neither the Gemini nor the MOL lab allow in vessel science transfer. For reference I pulled up the Keyhole recovery pod which does work and saw this { name = ModuleScienceContainer reviewActionName = #autoLOC_502201 //#autoLOC_502201 = Review Stored Data storeActionName = #autoLOC_502202 //#autoLOC_502202 = Store Experiments evaOnlyStorage = True // i.e. can nearby regular vessels also do this, or EVA only storageRange = 1.3 canBeTransferredToInVessel = True canTransferInVessel = True showStatus = True } While Gemini has { name = ModuleScienceContainer reviewActionName = Review Stored Data storeActionName = Store Experiments evaOnlyStorage = True storageRange = 2.0 } and MOL has { name = ModuleScienceContainer reviewActionName = Review Data storeActionName = Store Experiments collectActionName = Take Data evaOnlyStorage = True storageRange = 2 allowRepeatedSubjects = True } Do these 3 lines need to be added? canBeTransferredToInVessel = True canTransferInVessel = True showStatus = True Quote Link to comment Share on other sites More sharing options...
birdog357 Posted August 18, 2021 Share Posted August 18, 2021 32 minutes ago, birdog357 said: @Zorg I think I may have found my issue with getting the science out of the KH-10. Neither the Gemini nor the MOL lab allow in vessel science transfer. For reference I pulled up the Keyhole recovery pod which does work and saw this { name = ModuleScienceContainer reviewActionName = #autoLOC_502201 //#autoLOC_502201 = Review Stored Data storeActionName = #autoLOC_502202 //#autoLOC_502202 = Store Experiments evaOnlyStorage = True // i.e. can nearby regular vessels also do this, or EVA only storageRange = 1.3 canBeTransferredToInVessel = True canTransferInVessel = True showStatus = True } While Gemini has { name = ModuleScienceContainer reviewActionName = Review Stored Data storeActionName = Store Experiments evaOnlyStorage = True storageRange = 2.0 } and MOL has { name = ModuleScienceContainer reviewActionName = Review Data storeActionName = Store Experiments collectActionName = Take Data evaOnlyStorage = True storageRange = 2 allowRepeatedSubjects = True } Do these 3 lines need to be added? canBeTransferredToInVessel = True canTransferInVessel = True showStatus = True Success. Looks like I need to figure out how to do a pull request... Quote Link to comment Share on other sites More sharing options...
WindupHero7 Posted August 18, 2021 Share Posted August 18, 2021 The recent changes to the RemoteTech patches seem to have fixed all my connection woes with spacecraft like the Agena and Apollo, but I think there's something else that needs to be addressed with the early probes. For a basic example, Explorer 1- With a tech tree tweak to unlock the integrated 3km Omni antenna and running RT in root mode, I can get Explorer 1 to have connection in LKO when directly over ground stations. However, the battery doesn't even even have enough juice to transmit home the science from the integrated Geiger Counter experiment. I think that along with antenna changes in the RT patches, the early probes need battery life patches as well. Quote Link to comment Share on other sites More sharing options...
Pappystein Posted August 18, 2021 Share Posted August 18, 2021 51 minutes ago, birdog357 said: Success. Looks like I need to figure out how to do a pull request... Good job! Here are some helpful links. When I set up my first Repo (repository) there was a link to a bunch of Youtube Videos as well on Github... can't find it now to save my bacon so atleast I can provide these! https://guides.github.com/activities/hello-world/#pr https://docs.github.com/en/github/collaborating-with-pull-requests Quote Link to comment Share on other sites More sharing options...
birdog357 Posted August 18, 2021 Share Posted August 18, 2021 9 minutes ago, Pappystein said: Good job! Here are some helpful links. When I set up my first Repo (repository) there was a link to a bunch of Youtube Videos as well on Github... can't find it now to save my bacon so atleast I can provide these! https://guides.github.com/activities/hello-world/#pr https://docs.github.com/en/github/collaborating-with-pull-requests I decided to just go ahead and log an issue and attach my fix. Because I'm sure it needs massaging anyway. Quote Link to comment Share on other sites More sharing options...
Pappystein Posted August 18, 2021 Share Posted August 18, 2021 (edited) 3 hours ago, Pioneer_Steve said: I had no idea about why the colouring is the way it is. That is why I post this stuff. So thank you right back I am blessed/cursed with a pretty good memory for things like that. Don't ask me if I remembered the SPS's AJ10 variant correctly tho! I have spent a lot of time over the past 3 years studying the AJ10 engine. Not because I think it is a great engine (it isn't) But because Hypergolic and Fuel in general intrigue me. The AJ10 has had more fuel types run through it (by combinations) than any other Production engine in the world. Name a Fuel... and there is a good chance that if the AJ10 didn't get built with it... someone somewhere atleast looked into it. About the only one I am unsure of is Methane (CH4). Here is an incomplete list of the different fuels. Listed by Oxidiser and every fuel I can remember being used in an AJ10 with that Oxidizer. WFNA and JP4,6,8/Kerosene, UDMH and Hydrazine IRFNA and JP8, Hydrazine, UDMH IRFNA3 and UDMH, MMH IRFNA4 (also known as HDA) and UDMH, MMH NTO (Di-Nitrogen Tetra Oxide) and Hydrazine, UDMH, MMH and Aerozine50 MONx and UDMH, or MMH (the x in MONx is a ratio number) LOX and Kerosene (JP4 I believe), Liquid Hydrogen (yes the AJ10-133 was the GE Hydrolox AJ10 for their Apollo program small capsule proposal. I am uncertain if any Liquid fluorine shenanigans hit this engine... but if it did *SHUDDER* Edited August 18, 2021 by Pappystein Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.