Virtualgenius Posted August 8, 2021 Share Posted August 8, 2021 (edited) I give you the Aurora Station the largest I have ever created its all modular (had to use the old B9 spotlights to illuminate it) Edited August 8, 2021 by Virtualgenius Quote Link to comment Share on other sites More sharing options...
Daniel Prates Posted August 8, 2021 Share Posted August 8, 2021 15 minutes ago, Virtualgenius said: I give you the Aurora Station the largest I have ever created its all modular (had to use the old B9 spotlights to illuminate it) Around Eve? Must have been quite the challenge to put it there! You use 1.12? There is a warning on the OP but I havent seen issues myself. Quote Link to comment Share on other sites More sharing options...
Virtualgenius Posted August 8, 2021 Share Posted August 8, 2021 Fortunately I use the Near future launch vehicles which are huge so can launch a few modules at a time I am using 1.11 till all the mods update Quote Link to comment Share on other sites More sharing options...
Basesixty Posted August 9, 2021 Share Posted August 9, 2021 Where is the dev thread for the "big update" I see a few people talking about? Quote Link to comment Share on other sites More sharing options...
Zelda Posted August 9, 2021 Share Posted August 9, 2021 20 minutes ago, Basesixty said: Where is the dev thread for the "big update" I see a few people talking about? Quote Link to comment Share on other sites More sharing options...
Basesixty Posted August 9, 2021 Share Posted August 9, 2021 Thanks a ton. Quote Link to comment Share on other sites More sharing options...
coyotesfrontier Posted August 10, 2021 Share Posted August 10, 2021 (edited) @NerteaA few more bugs I've noticed: -The footpads of the base frames are permanently sideways. -The IVA on the 1.25m airlock is upside down. -The 1.25m hub's blanket texture is the same as the white plating one. -The observation and agriculture domes have no bottom colliders. -The USI-LS and MKS patches throw errors upon load, but still function, strangely enough. -When activating the IVA overlay, the props (and in certain cases the windows) of some of the new parts are offset massively away from the vessel: Edited August 10, 2021 by coyotesfrontier Quote Link to comment Share on other sites More sharing options...
modus Posted August 10, 2021 Share Posted August 10, 2021 Isn't this supposed to be in the dev thread, aren't these reports for 2.0.0? Quote Link to comment Share on other sites More sharing options...
Nertea Posted August 10, 2021 Author Share Posted August 10, 2021 Oh that's where that bug report is. I thought I was tripping, I saw it last night and couldn't find it . Quote Link to comment Share on other sites More sharing options...
linuxgurugamer Posted August 10, 2021 Share Posted August 10, 2021 On 7/21/2021 at 3:38 PM, Nertea said: Just a note that this will not be updated for 1.12 until I'm done developing the big update. I saw one bug report for 1.12, something about the little Kerbal pic thing in the bottom right’s camera is clipped in the wall Are there any others to worry about? Quote Link to comment Share on other sites More sharing options...
Nertea Posted August 10, 2021 Author Share Posted August 10, 2021 1 hour ago, linuxgurugamer said: I saw one bug report for 1.12, something about the little Kerbal pic thing in the bottom right’s camera is clipped in the wall Are there any others to worry about? Kerbal pics are minor work, not really planning on fixing those. The main problem is rotation docking port stuff. Quote Link to comment Share on other sites More sharing options...
Nertea Posted August 13, 2021 Author Share Posted August 13, 2021 Release the kraken! Stockalike Station Parts Expansion Redux 2.0 (click for pics) Changes KSP 1.12 Updated ModuleManger to 4.2.1 Updated NearFutureProps to 0.7.1 Updated B9PartSwitch to 2.18.0 Deprecated StationPartsExpansionMetal Extra. Don't use it anymore, uninstall it if you have it Added StationPartsExpansionIVAs Extra. This now contains the IVAs. By default, all IVAs now use the 'blank' internal space New 1.875m part set Middle ground between 1.25m and 2.5m White, Insulated, Metal surface variants Full set of endcap variants (White, Metal, Black, Insulated in both handles/bare versions) PMA-T1 Pressurized Crew Tube: basic crew tube PMA-T2 Pressurized Crew Tube: basic medium crew tube PMA-T3 Pressurized Crew Tube: basic short crew tube PMA-1A Angled Pressurized Crew Tube: angle crew tube with 30, 45 and 90 degree variants PMA-AR Radial Attachemnt Module: basic attach module PMA-MULT Multi-Point Station Connector: multi-hub with 6-way, 5-way, 4-way, planar 4-way, 3-way, elbow variants PMA-C 'Panoptes' Observation Module: cupola with 1 crew member capacity PMA-2 'Quay' Station Core: station core with 3 crew member capacity PMA-3 'Spectra' Utility Module: multipurpose utility module with 2 crew member capacity PMA-5A 'Dawn' Habitation Module: large crew module with 5 crew member capacity PMA-5B 'Evening' Habitation Module: small crew module with 3 crew member capacity PMA-4 'Nature' Science Module: science module with 2 crew member capacity BR-1B Adjustable Base Cradle: 1.875m leveling ground base cradle BZ-1B Adjustable Base Frame: 1.875m leveling ground base frame New limited 5m part set Only comes in White, with minimal endcap variants (white, black, handles/bare handles) SDV-2 'Atlas' Deep Space Habitation Module: really large crew module. 14 Kerbal capacity SDV-2B 'Titan' Compact Deep Space Habitation Module: really large crew module but flat. 6 Kerbals. SDV-3 'Minerva' Deep Space Control Module: Large station control module, with a number of interesting features. 5 Kerbal capacity SDV-1 'Leto' Deep Space Logistics Module: Big cargo module SDV-1X 'Atriedes' Deep Space Logistics Module: Big cargo module, half size SDV-4 'Demeter' Cultivation Module: very large greenhouse/aquaculture facility with 4 kerbal capacity SDV-6 'Delphi' Science Module: Large science module with intergrated exposed facility and telescope SDV-G1 'Tholos' Geodesic Dome: Basic geodesic dome with nothing in it. Toggleable colliders for customization SDV-G2 'Villa' Cultivation Dome: Dome with greenhouse functions and 2 kerbal capacity. SDV-G3 'Domus' Habitation Dome: Dome with habitation functions and 6 kerbal capacity. SDV-G4 'Astrolabe' Observation Dome: Dome with cupola functions and 2 kerbal capacity SDV-X 'Cronus' Extensible Centrifuge: Immense centrifuge with 16 kerbal capacity and integrated lab facility SDV-4 Adapter: basic adapter SDV-6 Flat Adapter: flat adapter BR-4 Adjustable Base Cradle: 5m leveling ground base cradle BZ-4 Adjustable Base Frame: 5m leveling ground base frame New non-specific size parts: SD-1x1 Structural Panel: radial white truss panel similar to the Delphi external facility panels SD-2x2 Structural Panel: radial white truss panel similar to the Delphi external facility panels, but a bigger version PAS-T 'Oculus' Remote Telescope: Small radially attachable telescope dome PAS-G 'G4RD3N' Hydroponics Cupola: Small radially attachable cupola dome with plants inside it B-ST41R Extensible Stairway: Small staircase with adjustable lengths 1.25m part updates Added White, Metal surface variants Repainted old surface variant into insulated thermal blanket variant matching new 1.875m parts 2.5m part updates Added White, Metal surface variants Repainted old surface variant into insulated thermal blanket variant matching new 1.875m parts General fixes and updates Adjusted mass, cost and entry cost of base frame cradles which used to be completely nonsensical Reworked 1.25 and 2.5m endcaps completely to match new work on 1.875m endcaps Renamed PTD/PFD (1.25m) part series to PAS/PAF to help with default VAB sorting Replacement 1.25 port, extending 1.25m port, extending 2.5m port upgraded with rotation functions from KSP 1.12 Compatibility Added USI Recycle bin to containers when USI Tools is installed Quote Link to comment Share on other sites More sharing options...
Minmus Taster Posted August 13, 2021 Share Posted August 13, 2021 2 minutes ago, Nertea said: Release the kraken! Stockalike Station Parts Expansion Redux 2.0 (click for pics) Changes KSP 1.12 Updated ModuleManger to 4.2.1 Updated NearFutureProps to 0.7.1 Updated B9PartSwitch to 2.18.0 Deprecated StationPartsExpansionMetal Extra. Don't use it anymore, uninstall it if you have it Added StationPartsExpansionIVAs Extra. This now contains the IVAs. By default, all IVAs now use the 'blank' internal space New 1.875m part set Middle ground between 1.25m and 2.5m White, Insulated, Metal surface variants Full set of endcap variants (White, Metal, Black, Insulated in both handles/bare versions) PMA-T1 Pressurized Crew Tube: basic crew tube PMA-T2 Pressurized Crew Tube: basic medium crew tube PMA-T3 Pressurized Crew Tube: basic short crew tube PMA-1A Angled Pressurized Crew Tube: angle crew tube with 30, 45 and 90 degree variants PMA-AR Radial Attachemnt Module: basic attach module PMA-MULT Multi-Point Station Connector: multi-hub with 6-way, 5-way, 4-way, planar 4-way, 3-way, elbow variants PMA-C 'Panoptes' Observation Module: cupola with 1 crew member capacity PMA-2 'Quay' Station Core: station core with 3 crew member capacity PMA-3 'Spectra' Utility Module: multipurpose utility module with 2 crew member capacity PMA-5A 'Dawn' Habitation Module: large crew module with 5 crew member capacity PMA-5B 'Evening' Habitation Module: small crew module with 3 crew member capacity PMA-4 'Nature' Science Module: science module with 2 crew member capacity BR-1B Adjustable Base Cradle: 1.875m leveling ground base cradle BZ-1B Adjustable Base Frame: 1.875m leveling ground base frame New limited 5m part set Only comes in White, with minimal endcap variants (white, black, handles/bare handles) SDV-2 'Atlas' Deep Space Habitation Module: really large crew module. 14 Kerbal capacity SDV-2B 'Titan' Compact Deep Space Habitation Module: really large crew module but flat. 6 Kerbals. SDV-3 'Minerva' Deep Space Control Module: Large station control module, with a number of interesting features. 5 Kerbal capacity SDV-1 'Leto' Deep Space Logistics Module: Big cargo module SDV-1X 'Atriedes' Deep Space Logistics Module: Big cargo module, half size SDV-4 'Demeter' Cultivation Module: very large greenhouse/aquaculture facility with 4 kerbal capacity SDV-6 'Delphi' Science Module: Large science module with intergrated exposed facility and telescope SDV-G1 'Tholos' Geodesic Dome: Basic geodesic dome with nothing in it. Toggleable colliders for customization SDV-G2 'Villa' Cultivation Dome: Dome with greenhouse functions and 2 kerbal capacity. SDV-G3 'Domus' Habitation Dome: Dome with habitation functions and 6 kerbal capacity. SDV-G4 'Astrolabe' Observation Dome: Dome with cupola functions and 2 kerbal capacity SDV-X 'Cronus' Extensible Centrifuge: Immense centrifuge with 16 kerbal capacity and integrated lab facility SDV-4 Adapter: basic adapter SDV-6 Flat Adapter: flat adapter BR-4 Adjustable Base Cradle: 5m leveling ground base cradle BZ-4 Adjustable Base Frame: 5m leveling ground base frame New non-specific size parts: SD-1x1 Structural Panel: radial white truss panel similar to the Delphi external facility panels SD-2x2 Structural Panel: radial white truss panel similar to the Delphi external facility panels, but a bigger version PAS-T 'Oculus' Remote Telescope: Small radially attachable telescope dome PAS-G 'G4RD3N' Hydroponics Cupola: Small radially attachable cupola dome with plants inside it B-ST41R Extensible Stairway: Small staircase with adjustable lengths 1.25m part updates Added White, Metal surface variants Repainted old surface variant into insulated thermal blanket variant matching new 1.875m parts 2.5m part updates Added White, Metal surface variants Repainted old surface variant into insulated thermal blanket variant matching new 1.875m parts General fixes and updates Adjusted mass, cost and entry cost of base frame cradles which used to be completely nonsensical Reworked 1.25 and 2.5m endcaps completely to match new work on 1.875m endcaps Renamed PTD/PFD (1.25m) part series to PAS/PAF to help with default VAB sorting Replacement 1.25 port, extending 1.25m port, extending 2.5m port upgraded with rotation functions from KSP 1.12 Compatibility Added USI Recycle bin to containers when USI Tools is installed Amazing work! Quote Link to comment Share on other sites More sharing options...
Spaceman.Spiff Posted August 13, 2021 Share Posted August 13, 2021 Congrats on release! I've seen the absurd amount of work that went into this and wholeheartedly thank you for it! Quote Link to comment Share on other sites More sharing options...
idamoofus Posted August 13, 2021 Share Posted August 13, 2021 (edited) Congratulations on the release - and it lives up to every second of the hype. Sped through and tried to find any remaining issues, forgive my unrefined writing: Spoiler PAS-MULT connector - Insulated exterior identical to White exterior SDV-4 and SDV-6 adapters - Description missing SDV-G1 "Tholos" dome - Dome structure is translucent, at least in VAB (intentional?) Clamp-O-Tron docking port - Name of White variant missing ("#LOC_SSPX_"etc.) PAF-1A "Volleyball" - part icon is uninflated PMA-T crew tubes - radial attachment is sideways PMA-3 "Spectra" - Hatch doesn't change when exterior variant changed Edited August 14, 2021 by MrLake missed one Quote Link to comment Share on other sites More sharing options...
ra4nd0m Posted August 13, 2021 Share Posted August 13, 2021 On 8/8/2021 at 3:48 AM, Virtualgenius said: I give you the Aurora Station How did you managed to assemble this truss segment? Robotic arm? Space tugs? Quote Link to comment Share on other sites More sharing options...
maxrsp Posted August 13, 2021 Share Posted August 13, 2021 Amazing work as usual - Thank you very much!!! Quote Link to comment Share on other sites More sharing options...
ra4nd0m Posted August 13, 2021 Share Posted August 13, 2021 @Nertea I think you should remove sspxr metal textures pack from CKAN as soon as possible cause right now they can both be installed by mistake which qute literally summons a kraken of errors. Quote Link to comment Share on other sites More sharing options...
Nertea Posted August 13, 2021 Author Share Posted August 13, 2021 6 minutes ago, ra4nd0m said: @Nertea I think you should remove sspxr metal textures pack from CKAN as soon as possible cause right now they can both be installed by mistake which qute literally summons a kraken of errors. It should be marked as conflicting and frozen at this point. Quote Link to comment Share on other sites More sharing options...
septemberWaves Posted August 14, 2021 Share Posted August 14, 2021 Is there a patch around for adding the life support resources used by Kerbalism as a part switch option to the cargo containers from this mod? I can probably write one if not, but I figured it makes sense to ask if one already exists. Quote Link to comment Share on other sites More sharing options...
danfarnsy Posted August 14, 2021 Share Posted August 14, 2021 I didn't realize until I went to start writing some updated patches for USI LS and MKS for the 5m parts how very light these parts are compared to their 3.75m counterparts. Since the capability/capacity of the parts is not a whole lot more, and getting reasonable TWR out of FFT engines would be tough, I suppose they make sense. But the mass/volume is still, uh, very impressive when you consider, for example, the cylindrical greenhouse takes up over 4x the space with only 50% more mass. Quote Link to comment Share on other sites More sharing options...
viveleroi Posted August 14, 2021 Share Posted August 14, 2021 Hot damn I am eager to try the update! I wish it worked on 1.10 as I'm currently early into an RP-1 play. Quote Link to comment Share on other sites More sharing options...
Rakete Posted August 14, 2021 Share Posted August 14, 2021 (edited) Great job ! @Nertea Small question: does this Update work with 1.11.2 or does it require 1.12 (because the rotating docking port system is used in this mod, if I remember correctly) ? Haven't installed 1.12 yet, due to still waiting for a proper fix do drifting dockingports (in the base game - or otherwise to Mods being compatible to the mod fix). Edited August 14, 2021 by Rakete Quote Link to comment Share on other sites More sharing options...
funnelton Posted August 14, 2021 Share Posted August 14, 2021 (edited) seems like I can start building my inkernational space station Edited August 14, 2021 by funnelton Quote Link to comment Share on other sites More sharing options...
Kaa253 Posted August 14, 2021 Share Posted August 14, 2021 3 hours ago, danfarnsy said: writing some updated patches for USI LS and MKS for the 5m parts I hacked together a rough and ready USI-LS agropnonics patch for the PAS-G 'G4RD3N' cupola, the SDV-4 'Demeter' module and the SDV-G2 'Villa' dome. I expect others can do better but here it is to use, share and improve however you like. Spoiler // Some additional Greenhouses patches for USI-LS mod //PAS-G 'G4RD3N' Hydroponics Module @PART[sspx-cupola-greenhouse-125-1]:NEEDS[USILifeSupport] { MODULE { name = USI_SwapController } MODULE { name = USI_SwappableBay bayName = Bay 1 moduleIndex = 0 } MODULE { name = USI_Converter UseSpecialistBonus = false } MODULE { name = USI_ConverterSwapOption ConverterName = Agroponics StartActionName = Start Agroponics StopActionName = Stop Agroponics INPUT_RESOURCE { ResourceName = Mulch Ratio = 0.00030000 } INPUT_RESOURCE { ResourceName = Fertilizer Ratio = 0.00003000 } OUTPUT_RESOURCE { ResourceName = Supplies Ratio = 0.00033000 DumpExcess = False } INPUT_RESOURCE { ResourceName = ElectricCharge Ratio = 0.66 } } RESOURCE { name = Supplies amount = 0 maxAmount = 75 } RESOURCE { name = Fertilizer amount = 0 maxAmount = 75 } RESOURCE { name = Mulch amount = 0 maxAmount = 75 } RESOURCE { name = ElectricCharge amount = 150 maxAmount = 150 } } //SDV-4 'Demeter' Cultivation Module @PART[sspx-greenhouse-5-1]:NEEDS[USILifeSupport] { MODULE { name = USI_SwapController } MODULE { name = USI_SwappableBay bayName = Bay 1 moduleIndex = 0 } MODULE { name = USI_Converter UseSpecialistBonus = false } MODULE { name = USI_ConverterSwapOption ConverterName = Agroponics StartActionName = Start Agroponics StopActionName = Stop Agroponics INPUT_RESOURCE { ResourceName = Mulch Ratio = 0.00400000 } INPUT_RESOURCE { ResourceName = Fertilizer Ratio = 0.00040000 } OUTPUT_RESOURCE { ResourceName = Supplies Ratio = 0.00440000 DumpExcess = False } INPUT_RESOURCE { ResourceName = ElectricCharge Ratio = 10.5 } } RESOURCE { name = Supplies amount = 0 maxAmount = 800 } RESOURCE { name = Fertilizer amount = 0 maxAmount = 800 } RESOURCE { name = Mulch amount = 0 maxAmount = 800 } RESOURCE { name = ElectricCharge amount = 1500 maxAmount = 1500 } } //SDV-G2 'Villa' Cultivation Dome @PART[sspx-dome-greenhouse-5-1]:NEEDS[USILifeSupport] { MODULE { name = USI_SwapController } MODULE { name = USI_SwappableBay bayName = Bay 1 moduleIndex = 0 } MODULE { name = USI_Converter UseSpecialistBonus = false } MODULE { name = USI_ConverterSwapOption ConverterName = Agroponics StartActionName = Start Agroponics StopActionName = Stop Agroponics INPUT_RESOURCE { ResourceName = Mulch Ratio = 0.000120000 } INPUT_RESOURCE { ResourceName = Fertilizer Ratio = 0.00001200 } OUTPUT_RESOURCE { ResourceName = Supplies Ratio = 0.000132000 DumpExcess = False } INPUT_RESOURCE { ResourceName = ElectricCharge Ratio = 2.64 } } RESOURCE { name = Supplies amount = 0 maxAmount = 200 } RESOURCE { name = Fertilizer amount = 0 maxAmount = 200 } RESOURCE { name = Mulch amount = 0 maxAmount = 200 } RESOURCE { name = ElectricCharge amount = 400 maxAmount = 400 } } Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.